Jump to content

father_mande

Forum Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by father_mande

  1. Hi, F.Y.I. I do a rebuild from scratch with 2 partitions ... all run now What I do : remove volume on USB keys recreate volume (2) ... during this phase I was stooped due to some errors ? so I have also do a bad-blocks check ... and get one error (marked) create 2 volumes and format it in ext4. follow the OPKG install procedure as usual connect via ssh update, upgrade and reinstall packages (get back previous configuration (saved before) I am not sure that problem come from the bad-block but perhaps ... Thanks for your help. Philippe. NB now I will check to have 2 versions installed as suggested here before
  2. Hi, OK I will redo a fresh install (I have a full save of all my configuration and start_up scripts) BUT NO I directly start with Entware and all was running fine (I just forgot to do an update / upgrade from some times ... because all run as well before the Giga router update ) I don't have any trace of using uClibc up to now (except in the /lib provide by keenetic) Thanks for your quick response. Philippe. NB I will return result here after clean install.
  3. Hi, in complement : content of ld.so.cache ALSO ld.so.conf is empty (don't know if it's normal) /opt # strings etc/ld.so.cache ld.so-1.7.0 glibc-ld.so.cache1.1" libz.so.1 /opt/lib/libz.so.1 libz.so /opt/lib/libz.so libuuid.so.1 /opt/lib/libuuid.so.1 libuuid.so /opt/lib/libuuid.so libutil.so.1 /opt/lib/libutil.so.1 libstdc++.so.6 /opt/lib/libstdc++.so.6 libssp.so.0 /opt/lib/libssp.so.0 libssl.so.1.0.0 /opt/lib/libssl.so.1.0.0 librt.so.1 /opt/lib/librt.so.1 libresolv.so.2 /opt/lib/libresolv.so.2 libpthread.so.0 /opt/lib/libpthread.so.0 libpcreposix.so.0 /opt/lib/libpcreposix.so.0 libpcre.so.1 /opt/lib/libpcre.so.1 libpcre.so /opt/lib/libpcre.so libpcprofile.so /opt/lib/libpcprofile.so libparted.so.2 /opt/lib/libparted.so.2 libparted.so /opt/lib/libparted.so libnss_files.so.2 /opt/lib/libnss_files.so.2 libnss_dns.so.2 /opt/lib/libnss_dns.so.2 libnsl.so.1 /opt/lib/libnsl.so.1 libndm.so /opt/lib/libndm.so libmemusage.so /opt/lib/libmemusage.so libmagic.so.1 /opt/lib/libmagic.so.1 libm.so.6 /opt/lib/libm.so.6 libgcc_s.so.1 /opt/lib/libgcc_s.so.1 libdl.so.2 /opt/lib/libdl.so.2 libcrypto.so.1.0.0 /opt/lib/libcrypto.so.1.0.0 libcrypt.so.1 /opt/lib/libcrypt.so.1 libcidn.so.1 /opt/lib/libcidn.so.1 libc.so.6 /opt/lib/libc.so.6 libblkid.so.1 /opt/lib/libblkid.so.1 libblkid.so /opt/lib/libblkid.so libanl.so.1 /opt/lib/libanl.so.1 ld.so.1 /opt/lib/ld.so.1 Philippe.
  4. Hi, I just update my KN-1010 to 2.15.C.4.0-1 ... without visible problem After that I open a ssh console (ssh from opkg) and run opkg update ... O.K. then opkg upgrade ... and I failed in missing libc.so.0 (cannot open shared object file: No such file or directory) Hum! I will try by adding a LD_LIBRARY_PATH in case of problem in opkg libraries path LD_LIBRARY_PATH=/opt/lib opkg upgrade NOW : wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory if I redo test with or without LD_LIBRARY_PATH I have now always same : wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory EVEN for an update /opt # opkg update Downloading http://bin.entware.net/mipselsf-k3.4/Packages.gz wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory *** Failed to download the package list from http://bin.entware.net/mipselsf-k3.4/Packages.gz Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory *** Failed to download the package list from http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz Collected errors: * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/Packages.gz, wget returned 127. * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz, wget returned 127. for upgrade : /opt # opkg upgrade Upgrading zoneinfo-europe on root from 2018g-1 to 2019a-1... Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2019a-1_mipsel-3.4.ipk wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory Upgrading busybox on root from 1.29.2-1 to 1.30.1-2... Downloading http://bin.entware.net/mipselsf-k3.4/busybox_1.30.1-2_mipsel-3.4.ipk wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory Upgrading libpcre on root from 8.42-1 to 8.43-1... ... ... etc. Collected errors: * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2019a-1_mipsel-3.4.ipk, wget returned 127. * opkg_install_pkg: Failed to download zoneinfo-europe. Perhaps you need to run 'opkg update'? * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/busybox_1.30.1-2_mipsel-3.4.ipk, wget returned 127. * opkg_install_pkg: Failed to download busybox. Perhaps you need to run 'opkg update'? ... ... etc. do you have some advice before I redo a clean install Philippe.
×
×
  • Create New...