Jump to content

cheburah

Forum Members
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

 Content Type 

Posts posted by cheburah

    Keenetic Air (KN-1610) в режиме адаптера

    in Обмен опытом

    Posted

    Добрый день.

    Подскажите, Keenetic Air (KN-1610) подключен в режиме адаптера к Keenetic Ultra (KN-1810) к сети сегмента Домашняя сеть. Устройства в LAN портах KN-1610 выходят в интернет, видят друг друга и KN-1810, но не имеют доступа к устройствам в LAN портах KN-1810. Прошивка последняя 3.4.12 на обоих устройствах. DHCP на KN-1810 отключен, сервер DHCP как раз висит на LAN KN-1810. Но включенные устройства уже получили сетевые настройки, при переключении с кабеля LAN KN-1810 на кабель LAN адаптера KN-1610 без выключения питания, настройки сохраняются, и рабочий интернет на устройствах LAN KN-1610 как бы доказывает.
    Получается, не работает маршрутизация с wifi KN-1810 на LAN KN-1810, чего быть не может, т.к. это всё в сегменте Домашняя сеть.

    Home Assistant

    in Вопросы по сборке и настройке Opkg

    Posted

    Добрый день.

    Прошу помощи, при установке bcrypt выдает ошибку:

     

    pip3 install bcrypt
    Collecting bcrypt
      Using cached bcrypt-3.1.7.tar.gz (42 kB)
      Installing build dependencies ... error
      ERROR: Command errored out with exit status 1:
       command: /opt/bin/python3 /opt/lib/python3.8/site-packages/pip install --ignore-installed --no-user --prefix /opt/tmp/pip-build-env-_5ch_acc/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'setuptools>=40.8.0' wheel 'cffi>=1.1; python_implementation != '"'"'PyPy'"'"''
           cwd: None
      Complete output (171 lines):
      Collecting setuptools>=40.8.0
        Using cached setuptools-49.6.0-py3-none-any.whl (803 kB)
      Collecting wheel
        Using cached wheel-0.35.1-py2.py3-none-any.whl (33 kB)
      Collecting cffi>=1.1
        Using cached cffi-1.14.1.tar.gz (468 kB)
      Collecting pycparser
        Using cached pycparser-2.20-py2.py3-none-any.whl (112 kB)
      Building wheels for collected packages: cffi
        Building wheel for cffi (setup.py): started
        Building wheel for cffi (setup.py): finished with status 'error'
        ERROR: Command errored out with exit status 1:
         command: /opt/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"'; __file__='"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /opt/tmp/pip-wheel-q9iv2d7v
             cwd: /opt/tmp/pip-install-j0lt5mtt/cffi/
        Complete output (71 lines):
        Package libffi was not found in the pkg-config search path.
        Perhaps you should add the directory containing `libffi.pc'
        to the PKG_CONFIG_PATH environment variable
        No package 'libffi' found
        Package libffi was not found in the pkg-config search path.
        Perhaps you should add the directory containing `libffi.pc'
        to the PKG_CONFIG_PATH environment variable
        No package 'libffi' found
        Package libffi was not found in the pkg-config search path.
        Perhaps you should add the directory containing `libffi.pc'
        to the PKG_CONFIG_PATH environment variable
        No package 'libffi' found
        Package libffi was not found in the pkg-config search path.
        Perhaps you should add the directory containing `libffi.pc'
        to the PKG_CONFIG_PATH environment variable
        No package 'libffi' found
        Package libffi was not found in the pkg-config search path.
        Perhaps you should add the directory containing `libffi.pc'
        to the PKG_CONFIG_PATH environment variable
        No package 'libffi' found
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?

            No working compiler found, or bogus compiler options passed to
            the compiler from Python's standard "distutils" module.  See
            the error messages above.  Likely, the problem is not related
            to CFFI but generic to the setup.py of any Python package that
            tries to compile C code.  (Hints: on OS/X 10.8, for errors about
            -mno-fused-madd see http://stackoverflow.com/questions/22313407/
            Otherwise, see https://wiki.python.org/moin/CompLangPython or
            the IRC channel #python on irc.freenode.net.)

            Trying to continue anyway.  If you are trying to install CFFI from
            a build done in a different context, you can ignore this warning.

        running bdist_wheel
        running build
        running build_py
        creating build
        creating build/lib.linux-mips-3.8
        creating build/lib.linux-mips-3.8/cffi
        copying cffi/model.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/vengine_gen.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/vengine_cpy.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/commontypes.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/ffiplatform.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/api.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/cffi_opcode.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/lock.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/setuptools_ext.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/verifier.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/cparser.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/error.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/pkgconfig.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/backend_ctypes.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/recompiler.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/__init__.py -> build/lib.linux-mips-3.8/cffi
        copying cffi/_cffi_include.h -> build/lib.linux-mips-3.8/cffi
        copying cffi/parse_c_type.h -> build/lib.linux-mips-3.8/cffi
        copying cffi/_embedding.h -> build/lib.linux-mips-3.8/cffi
        copying cffi/_cffi_errors.h -> build/lib.linux-mips-3.8/cffi
        running build_ext
        building '_cffi_backend' extension
        creating build/temp.linux-mips-3.8
        creating build/temp.linux-mips-3.8/c
        gcc -Wno-unused-result -Wsign-compare -DNDEBUG -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -DNDEBUG -fno-inline -pthread -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -DNDEBUG -fno-inline -pthread -I/home/ryzhovau/Entware/staging_dir/target-mipsel_mips32r2_glibc-2.27/opt/include -I/home/ryzhovau/Entware/staging_dir/toolchain-mipsel_mips32r2_gcc-8.4.0_glibc-2.27/include -Qunused-arguments -Qunused-arguments -fPIC -I/usr/include/ffi -I/usr/include/libffi -I/opt/include/python3.8 -c c/_cffi_backend.c -o build/temp.linux-mips-3.8/c/_cffi_backend.o
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
        gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
        error: command 'gcc' failed with exit status 1
        ----------------------------------------
        ERROR: Failed building wheel for cffi
        Running setup.py clean for cffi
      Failed to build cffi
      DEPRECATION: Could not build wheels for cffi which do not use PEP 517. pip will fall back to legacy 'setup.py install' for these. pip 21.0 will remove support for this functionality. A possible replacement is to fix the wheel build issue reported above. You can find discussion regarding this at https://github.com/pypa/pip/issues/8368.
      Installing collected packages: setuptools, wheel, pycparser, cffi
          Running setup.py install for cffi: started
          Running setup.py install for cffi: finished with status 'error'
          ERROR: Command errored out with exit status 1:
           command: /opt/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"'; __file__='"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /opt/tmp/pip-record-0sy_y2eb/install-record.txt --single-version-externally-managed --prefix /opt/tmp/pip-build-env-_5ch_acc/overlay --compile --install-headers /opt/tmp/pip-build-env-_5ch_acc/overlay/include/python3.8/cffi
               cwd: /opt/tmp/pip-install-j0lt5mtt/cffi/
          Complete output (71 lines):
          Package libffi was not found in the pkg-config search path.
          Perhaps you should add the directory containing `libffi.pc'
          to the PKG_CONFIG_PATH environment variable
          No package 'libffi' found
          Package libffi was not found in the pkg-config search path.
          Perhaps you should add the directory containing `libffi.pc'
          to the PKG_CONFIG_PATH environment variable
          No package 'libffi' found
          Package libffi was not found in the pkg-config search path.
          Perhaps you should add the directory containing `libffi.pc'
          to the PKG_CONFIG_PATH environment variable
          No package 'libffi' found
          Package libffi was not found in the pkg-config search path.
          Perhaps you should add the directory containing `libffi.pc'
          to the PKG_CONFIG_PATH environment variable
          No package 'libffi' found
          Package libffi was not found in the pkg-config search path.
          Perhaps you should add the directory containing `libffi.pc'
          to the PKG_CONFIG_PATH environment variable
          No package 'libffi' found
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?

              No working compiler found, or bogus compiler options passed to
              the compiler from Python's standard "distutils" module.  See
              the error messages above.  Likely, the problem is not related
              to CFFI but generic to the setup.py of any Python package that
              tries to compile C code.  (Hints: on OS/X 10.8, for errors about
              -mno-fused-madd see http://stackoverflow.com/questions/22313407/
              Otherwise, see https://wiki.python.org/moin/CompLangPython or
              the IRC channel #python on irc.freenode.net.)

              Trying to continue anyway.  If you are trying to install CFFI from
              a build done in a different context, you can ignore this warning.

          running install
          running build
          running build_py
          creating build
          creating build/lib.linux-mips-3.8
          creating build/lib.linux-mips-3.8/cffi
          copying cffi/model.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/vengine_gen.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/vengine_cpy.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/commontypes.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/ffiplatform.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/api.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/cffi_opcode.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/lock.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/setuptools_ext.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/verifier.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/cparser.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/error.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/pkgconfig.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/backend_ctypes.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/recompiler.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/__init__.py -> build/lib.linux-mips-3.8/cffi
          copying cffi/_cffi_include.h -> build/lib.linux-mips-3.8/cffi
          copying cffi/parse_c_type.h -> build/lib.linux-mips-3.8/cffi
          copying cffi/_embedding.h -> build/lib.linux-mips-3.8/cffi
          copying cffi/_cffi_errors.h -> build/lib.linux-mips-3.8/cffi
          running build_ext
          building '_cffi_backend' extension
          creating build/temp.linux-mips-3.8
          creating build/temp.linux-mips-3.8/c
          gcc -Wno-unused-result -Wsign-compare -DNDEBUG -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -DNDEBUG -fno-inline -pthread -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -DNDEBUG -fno-inline -pthread -I/home/ryzhovau/Entware/staging_dir/target-mipsel_mips32r2_glibc-2.27/opt/include -I/home/ryzhovau/Entware/staging_dir/toolchain-mipsel_mips32r2_gcc-8.4.0_glibc-2.27/include -Qunused-arguments -Qunused-arguments -fPIC -I/usr/include/ffi -I/usr/include/libffi -I/opt/include/python3.8 -c c/_cffi_backend.c -o build/temp.linux-mips-3.8/c/_cffi_backend.o
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
          gcc: error: unrecognized command line option '-Qunused-arguments'; did you mean '-Wunused-parameter'?
          error: command 'gcc' failed with exit status 1
          ----------------------------------------
      ERROR: Command errored out with exit status 1: /opt/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"'; __file__='"'"'/opt/tmp/pip-install-j0lt5mtt/cffi/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /opt/tmp/pip-record-0sy_y2eb/install-record.txt --single-version-externally-managed --prefix /opt/tmp/pip-build-env-_5ch_acc/overlay --compile --install-headers /opt/tmp/pip-build-env-_5ch_acc/overlay/include/python3.8/cffi Check the logs for full command output.
      ----------------------------------------
    ERROR: Command errored out with exit status 1: /opt/bin/python3 /opt/lib/python3.8/site-packages/pip install --ignore-installed --no-user --prefix /opt/tmp/pip-build-env-_5ch_acc/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'setuptools>=40.8.0' wheel 'cffi>=1.1; python_implementation != '"'"'PyPy'"'"'' Check the logs for full command output.
     

     

     

     

×
×
  • Create New...