-
Posts
641 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Posts posted by KYTECHNGAMING
-
-
Today I did fresh-newly ext-ui installation on another device.
After disabling autostart of a service it gave this error. and it remains permanently visible. -
39 minutes ago, TheBB said:
Thanks, but it doesn't work. It's cosmetics. Look in the init.d folder after changing the startup script. The new file name is "1".
quickly solved: `error_reporting(E_NOTICE);`
Yes, this correction was only in the image. Pressing the "save" command yesterday caused it to create a new file named "1". I was going to correct the post today.
Since the editor is empty, I thought of solving it with !empty. I don't know how to code
it just gave an empty warning. I was able to read this. Thank you for sharing this command. I learned something new. -
2 hours ago, Leyser said:
После добавления ошибка меняется на
Warning: date(): Invalid date.timezone value 'Europe/Moskow', we selected the timezone 'UTC' for now. in /opt/share/www/ext-ui/addons/info/src/Linfo/Output/Html.php on line 1041
Warning: date(): Invalid date.timezone value 'Europe/Moskow', we selected the timezone 'UTC' for now. in /opt/share/www/ext-ui/addons/info/src/Linfo/Output/Html.php on line 1041
Warning: date(): Invalid date.timezone value 'Europe/Moskow', we selected the timezone 'UTC' for now. in /opt/share/www/ext-ui/addons/info/src/Linfo/Output/Html.php on line 1042
Warning: date(): Invalid date.timezone value 'Europe/Moskow', we selected the timezone 'UTC' for now. in /opt/share/www/ext-ui/addons/info/src/Linfo/Output/Html.php on line 1046Uncomment line in this file. Look path
- 3
-
56 minutes ago, sips said:
If so, the dial rule “(>9)x.” configured in the telephone line settings could be a solution. With such a rule, the system will add the prefix 9 to any number you’ll dial. For example, when you dial 1234567, the system sends a call to the number 91234567. BTW, the dial rule syntax is described here.
I have read this topic, but I could not solve it because I do not know about the switchboard and telephone lines. Thank you for this guide.
It was as I wished. I didn't have to press 9 when dialing. 🙏58 minutes ago, sips said:show nvox fxs-ports
default output; https://prnt.sc/x50cFI1NiQRL
1 hour ago, sips said:In order Keenetic Linear cancels the far end echo well,
I have seen that by default echo-cancellation is turned on.
1 hour ago, sips said:the impedance of its FXS ports must match the phones plugged to those ports.
http://77.93.202.3/viewtopic.php?f=7&t=936&start=10#p5784 I also saw in a forum post that just like you explained that impedance and echo are correlated. I need information written in the past. 😆
59 minutes ago, sips said:I assume that phone is intended for the Turkish market
yes, it is old model which is Siemens Gigaset AS180 https://gse.gigaset.com/fileadmin/legacy-assets/A31008-M2002-B401-2-5A19_tr_TRK.pdf
1 hour ago, sips said:1-4 below to set the impedance
https://prnt.sc/g1wkPl5hR7Ez Time to test. 📳
-
need to fix here @TheBB
https://prnt.sc/OrsdZ-3Mli_9 https://prnt.sc/so3U54-_9HDp
------------------------------------------------------------------------
solved: value='".$_GET['file']."' ---> value='".!empty($_GET['file'])."'- 1
-
-
P.S Don't forget to clear extension storage after updating to 0.5.107 if you see blank dark page
- 2
-
-
30 minutes ago, MDP said:
Unfortunately, I don’t see your software version, on my previous version, the firewall was also displayed as empty
Version 35(137) and yes there was null error in previous version.
-
@sips
My ISP really has a 5060 restriction.
I asked customer service to remove it and now I can register directly with the SIP server. I no longer need to use VPN and routing.I can't understand the dial code and many details.
There are 2 things I need to fix. Can you help me?1- I have to press 9 while calling. How can I remove this?
2- During the conversation, the other party's own voice echoes. Is it related to the handset or microphone strength? -
- 1
-
7 minutes ago, Julia Rybakova said:
Hi! I remember
You can reboot mesh system on Networks page for 1 button PLUS bulk operation
We're developing updating for mesh system. Soon!
Yes, I love using the feature. Also how do I reboot 28 devices
But in the batch restart action; 1-2 devices usually get a reboot command later. That is, the main controller and other devices reboot after rebooting. This can be understood from the difference of 2-3 minutes.
I guess we need some fine-tune. -
it will be fixed next version. 👍
-
3 hours ago, enpa said:
Yes, an error in the client's work occurs when "encryption": 1 is enabled, - this is due to the updates of openssl 3.
It will be fixed in the next version of the draft. Thanks to all!
@KYTECHNGAMING yes, thnks, issue found.I used encryption: 2 too. Thanks for all effort. Waiting fix. 🤘
-
- 1
-
Hello,
In version 3.9.a.8, Transmission produces records like the image below.
For this reason, it has been encountered that even interface access cannot be provided. -
48 minutes ago, Julia Rybakova said:
Good afternoon! This functionality is implemented on the Devices page, where you can manage updates.
We will think about adding when the entire network will be updated with one button
🙏🤘👍✔️
-
1 hour ago, sips said:
In order to clarify the cause of the issue “The telephony service is not configured”, please, provide me with additional diagnostics info:
1) restart your Keenetic;
2) check if the SIP line status “The telephony service is not configured” is displayed. If so, download the system event log from your Keenetic and attach it here with your next post. And please, this time, don’t disable/enable the SIP line before downloading the system event log file.Thank you for all your help.
I have turned Linear into singular use on the USB2.0 port.
I will continue to observe. My voip provider also changed my server today. With warp, I was able to access "register" status again.
Although I was using it with HUB without any problems, it suddenly showed a problem, which made me think it was a software problem.and interestingly, after replacing the 2.4A/5v adapter with 3A/5V, it was interesting that I observed such a problem.
The reason why I switched to 3A adapter; 1 ssd and 1 hdd were also connected on the hub. The hdd was making a head-banging sound, like it was seldom powering down. It was fixed after changing the adapter. -
On 9/2/2022 at 1:18 PM, sips said:
In my opinion, you’ve faced two different issues.
The first issue is “The telephony service is not configured”. If you see the message “The telephony service is not configured” again, try to connect Linear to the port USB2 of your Keenetic directly, without a USB hub. It could resolve the issue.
The second issue is SIP registration failure. I hope your provider will help you to resolve it.
I think it has to do with the hub.
I restarted hero. and result.but why. there is enough power. Linear is also known.
-
17 minutes ago, sips said:
Please clarify if I understand it right:
1) all your USB devices (HDD, SSD and Linear), are connected to the same USB hub connected to port USB1 of your Keenetic;
2) port USB2 of your Keenetic is not in use.
1- Yes
2- No, I am using for few leds
There is no power problem with USBs. Linear does not disconnect from usb.
I noticed the situation when I turned the service off and on manually. Linear either does not come on, it recognizes the settings again, or it gets better after a few cuts and turns on the switch.My VoIP service has been registered again at this morning.
I'm waiting for information from the provider for the source of the problem. -
On 8/25/2022 at 3:09 PM, Poolsh said:
The current build of entware from August 8 is missing ext-ui
http://bin.entware.net/mipselsf-k3.4/Packages.html
Perhaps this is due to the fact that php has become version 8.1? In principle, all this is available here http://bin.entware.net/mipselsf-k3.4/keenetic/archive/ , but it is not installed from there
If anything I have Ultra 1810
I had a successful install on my KN-1011 last week with these commands.
opkg update opkg upgrade opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7_7.4.9-1_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7-cgi_7.4.9-1_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7-cli_7.4.9-1_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7-mod-json_7.4.9-1_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7-mod-session_7.4.9-1_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/archive/uhttpd_kn_2021-03-21-15346de8-3_mipsel-3.4.ipk opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/archive/ext-ui_0.5-4_mipsel-3.4_kn.ipk
@TheBB How can I make the interface completely in English?
i did it with manual fix in some config files. Is there any other method? -
3 hours ago, sips said:
Please, clarify whether you turned the SIP line off and on 36 times?
yes, turned it off and on after some server and routing setup
or ⬇️
3 hours ago, sips said:when you see the SIP line status “The telephony service is not configured” and the telephony service is unreachable
restarted it for this reason.
-
I've experienced an unprecedented congestion on a large mesh network.
I noticed that the cpu and ram usage started to peak on the 5th day. I observed the situation for 1 week.
Now the device cannot be reached in rmm and mobile applications, it takes too long to open something in the interface.
The self-test could not be downloaded. swap usage had exceeded 150mb.I restarted services in opkg packages. But that was not the case.
CPU and memory usage drop as soon as I turn off traffic classification.High Cpu Usage - Traffic Classification ON - https://prnt.sc/9Vzq8KKNhYMs / htop: https://prnt.sc/CJHpZ0s9e281
Normal Cpu Usage - Traffic Classification OFF - https://prnt.sc/S6SEho4oo2t928 Keenetics operate in this network. There are 40-70 client connections.
Based on the request in this topic, an improvement seems necessary.
- 1
-
Mertcan sent me this issue for a reason today. There is a recent detail that there will be IPv6 improvements with 3.10.
- 1
Графический интерфейс для Entware
in Каталог готовых решений Opkg
Posted
solved for both instances.
https://prnt.sc/z1OBELLA9PIZ
https://prnt.sc/--OtWX-VprFK