Jump to content

KYTECHNGAMING

Forum Members
 View Profile  See their activity

  • Posts

    641

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by KYTECHNGAMING

  1. KYTECHNGAMING
    I'm guessing there are works for batch operations. We asked for a reboot. Multitasking features will be the foundation of RMM.
  2. KYTECHNGAMING
    Hi, It would be nice to see them all in the repeater as well as we can see them all in the main controller. We fully trust your developments. Actually, I can say that while writing this development, I was just looking for a note plugin(widget). When this note plugin(widget) is full, it is enough to have a notification icon somewhere in the interface that there is a note. A more challenging scenario is; There may be a note system that notifies the change of codes made with the CLI. For example, to show commands where values diifferent from the default are set.
  3. KYTECHNGAMING
    What is your ping check settings in wired or WISP? What is your tapology? Lan to lan for accespoint or lan to wan for double nat routing.
  4. KYTECHNGAMING
    https://prnt.sc/CsOffkdm7lWD these are my Carlitoxx and Odi sfps. 💙
  5. KYTECHNGAMING
    I will check all. Thank you!
  6. KYTECHNGAMING
    all ODI clones
  7. KYTECHNGAMING
    Thanks again for your solution. But there is one point that I still don't understand. When I do the routing manually for my ISP, I cannot register. In this case, is my problem the ISP blocking or the location of the sip proxy? WARP (wireguard) solved it while Turkey server was connected.
  8. KYTECHNGAMING
    @sips Thanks! It is working. SIP registered with WARP VPN forwarding. https://prnt.sc/n6UpUVEtoL3W https://prnt.sc/75JFUWfuEYsO https://prnt.sc/8VCfaGrWW5Vs https://prnt.sc/6nG7b6WlhxHI Now I need to learn dial codes, forwarding etc...
  9. KYTECHNGAMING
    Thank you for the explanations. Thinking that I can use the VOIP service in Türkiye, I brought Linear from Germany. It is not sold in my country. So, in this case, can we say that there is no compatibility for Türkiye? The ping to the SIP proxy is responding. In that case, do you recommend routing through Germany with a VPN?
  10. KYTECHNGAMING
    The problem persisted in 3.8.1. But the last thing I noticed is as follows. When the device is just turned on, it generally asks for the password. After the restart, if the entire mesh system is connected and 3-5 minutes have passed, the SMB can be accessed.
  11. KYTECHNGAMING
    My fault. I typed 5600 when I wanted to specify it as 5060. As 5060, it results in 408 timeouts. Addition: I sent another self-test as a secret message.
  12. KYTECHNGAMING
    Hi, Yesterday I shared a self-test as a secret message. I hope it arrived. @sips
  13. KYTECHNGAMING
    I will have sent it by tomorrow at the latest. Thank you.
  14. KYTECHNGAMING
    Thank you for the quick reply. But I am already using 3.8.1 dev. I have allowed 5060 ports with firewall Or is there any dns-based blocking, I checked. None of them yielded results. DNS queries seem to have trouble-free access to the SIP server.
  15. KYTECHNGAMING
    Hello, My SIP service was active today. I have Linear. SIP does not register. It gives 408 time out. What should I do? Peak DSL + Linear No problem with my sip server. I'm not blocked by the ISP either. I can provide services with Zopier. @sips Jun 21 16:09:27 nvox Line AVENCOM: 185.141.xxx.yyy registration failed: response 408 Request Timeout. or 16:10:39.001 pjsua_acc.c !..Unable to create/send REGISTER: Object is busy (PJSIP_EBUSY) [status=171001]
  16. KYTECHNGAMING
    Hello, I noticed something during 3.8.1 though I'm not sure about 3.8.0. I have a mesh system with 4 Keenetic. As 1 master controller, 2 repeaters and 1 access point. In the segment settings, port 1 is set to belong to segments. https://prnt.sc/TDWrR1zWHyAI On the repeaters, the 1st port appears as "down" in all of them. Devices cannot receive ip. With the "interface up" command, the port did not start to work. The iseg role has been removed. SpeedSter extender https://prnt.sc/2KTJL4SBruP4 MiBox was plugged in my 1st port. When I switch to the 2nd port, it continues to work properly. I remember it wasn't like this before. Is it a new feature? Could you give information? Ticket #588533
  17. KYTECHNGAMING
    Hello, I use custom settings on some devices in my mesh system. For example, static node connection... But sometimes it's hard to remember on which device I applied it. For this reason, it may be impossible for this device to reconnect in a possible relocation. If I can see this in the note, it's easy to remember and I can remove this setting first and then relocate it. Is it possible to improve on this issue in the interface or even in RMM? @eralde @Le ecureuil @Julia Rybakova
  18. KYTECHNGAMING
    Follow this topics 👍 You can add repeaters to the mesh network with both wired and wireless connections. You can manage your network with new segments. https://help.keenetic.com/hc/en-us/articles/360005236300-Network-segments#:~:text=Keenetic routers allow organizing the,' https://help.keenetic.com/hc/en-us/articles/360002155079-Setting-up-Mesh-Wi-Fi-System
  19. KYTECHNGAMING
    No mesh. You set it up classically. Set the switch on the back of air to D . this is access point mode. you can attach it to the mesh if you connect it to the main Air. You can create different segments from the main device interface. By default, all Keenetics come with Home network on and Guest network installed but turned off.
  20. KYTECHNGAMING
    Road to Keenetic TR RD 💙 Thanks Master @eralde
  21. KYTECHNGAMING
    I changed the ports. This time, streaming appears on other ports. 👍 https://prnt.sc/eMEINEBt1R25 I am sending Keendns access via private message.
  22. KYTECHNGAMING
    I have previously made a request that game engines not be included in the game class. I think it should be put in the default or download category/class. Ticket #561111 https://prnt.sc/L4UrvtM_OXzT when downloading the game: https://prnt.sc/-7YIzstblZFM
  23. KYTECHNGAMING
    I think there is a bug. I tried using ports 1 and 4 for iptv vlan. The usage details appear on the 8th port. I don't know if it's a theme or a gui problem. https://prnt.sc/Ag1_ZVaPJ9bR
  24. KYTECHNGAMING
    Can a clickable link be added for the 4th level domains created in the domain name section? or maybe redirect button. https://prnt.sc/s7MUuHV8DPOH In the new design, one-click links are available on the wi-fi mesh screen. In some cases, it may not work, or it may be good to be able to navigate to the domain redirection comfortably while in the domain name menu.
  25. KYTECHNGAMING
    Is this reported? https://prnt.sc/_Ate2mQUGmOs
×
×
  • Create New...