[Home and Guest traffic over switch]

Hello

Home and Guest traffic flows over multiple Keenetics (running as AP with roaming) from Keenetic Router ports (port config for Guest network is tagged) without any issues. Switches which support 802.1Q can manage traffic also without any problems (ports are configures as Trunk). Is there any possibility to get traffic from both vlans from generic cheap switches? Only Home traffic flows from them

Tnx

[CRC etc.. without Nightmode with Chrome]

tnx for info. its also possible to check over telnet but it would be nice to see it also directly

[CRC etc.. without Nightmode with Chrome]

Hello,

Without nighmode its not possible to see CRC, FEC,.. details on DSL type Keenetic devices. This detail must be a standard as you can see details on other branded devices

Tnx

[Can't see AP in MESH list]

I removed MWS and re-installed, did a factory to AP but still can't see on member list to add...

It says access unauthorised. how can I authorise it again? I changed default admin pass it that the issue? I tried mws revisit mac but nothing happened

config)> show mws candidate 

        candidate: 
                  mac: 50:ff:20:...
                  cid: 
                 mode: 
                model: 
                state: DISCONNECTED
              license: 

                  rci: 
                    error, code = 5243089, ident = Mws::RciClient, critical = no: "50:ff:20:...":
                           access unauthorized.

(config)> 

[Can't see AP in MESH list]

Ok I saw MWS list but how can I remove it (by CLI or removing wifi system component) ?

(config)> show mws cand

        candidate - display Modular Wi-Fi System candidates

(config)> show mws candidate 

        candidate: 
                  mac: 50:ff:20:...
                  cid: 
                 mode: 
                model: 
                state: DISCONNECTED
              license: 

                  rci: 
                    error, code = 5243089, ident = Mws::RciClient, critical = no: "50:ff:20:...":
                           access unauthorized.

(config)> 

[Can't see AP in MESH list]

Hello,

After auto firmware upgrade of ExtraDSL and Lite, Lite can't bee seen in mesh Wi-Fi system. I did a factory reset to Lite but still no luck. Anything else to do?

 

 

[Keenetic Extender/AP mode with 2 SSID]

problem solved by selecting intranet as segment and guest as tagged

 

[Keenetic Extender/AP mode with 2 SSID]

hello,

Main Keenetic has two SSID's which is main and guest. I added an AP to main controller and it has control of it but due to two SSID's (two VLANs) only main VLAN passes through. I changed to tagged VLAN but now AP is offline. Its not possible to select a port as trunk? What can I do?

Tnx

[Multi Site (more than two) IPsec VPN]

Created multi site vpn with PPTP. Thank you for help

[Multi Site (more than two) IPsec VPN]

hello,

I created two IPsec connections with diferent subnets for two different keenetics (Client-1 and Client-2) to connect server Keenetic. They are connected I don't have any issues but those keenetics can't ping each other. Do I need to write a routing on center router? Is there an example?

Client 1 ---VPN--- Server ---VPN--- Client 2

Tnx

[New features to add]

actually it says there is an update but when i select auto update any time it doesnt start. so i start it manually and it does it without any issues

[New features to add]

teşekkürler / thanks

[Network Port's Name (Port İdentifier)]

couldn't see dark mode and port description in 3.6.3. Is it for future versions?

[New features to add]

Hello,

Is there a possibility to add some feautres below listed in next versions?

- ICMP/WAN/DSL check by ping count and if fails then reboot device

- Reboot with schedule

- Full URL log with time stamp (Hostname+IP+Mac+URL) to Syslog Server

- Split Full URL log and System log in Live View

- Wi-Fi Site Survey option to see other AP's

- CDP discovery

- Some Keenetics don't update firmware automaticly even if any time is selected. This could also be fixed