GiovanniG

I had another tab of the browser opened on Sprint, there I could find the acquire button, I pressed it and it worked, now the extender is connected. This is amazing.. So I solved the problem, bu please write me again the command to send if I need it in future, thanks

Hi, thanks for support, the previous topic doesn't exist more, so I should create e new one, sorry for this. I've done by your instructions, the result log is { "prompt": "(config)", "status": [ { "status": "message", "code": "8781924", "ident": "Core::Legal", "message": "\"dpn\": accepted version 20230223." } ] } then I pressed acquire buttom the button disappeared, so I reset to factory settings the Air, wait air comes up, but no more acquire button. So I reboot the Sprinter, again no button, I want to type again the command but can't find it more, can you please write it me here? Thank you

To solve the problem the only way I suppose is create the network main/extender, and let the main do everything. For more infos read this thread:

Thanks for help, I've checked docs and nothing there answering my question: if I reset the second router and add it as extender, will the other devices, connected to the second router's ethernets, keep working with local LAN? (communicate with devices connected on ethernet links on the first router). Thank you for such info!

Thank you for your kind support. PLease notice that I have devices connected to the ethernet ports of the second router, that should communicate with the enternet ports of the first router, this is not only a WiFi device! I don't know if mesh is compatible with such configuration, I've read it's necessary to create a VLAN, so I suppose I need 2 VLANs, one for mesh, one to brigde the eth ports, is it correct, is it possible to do with AIR? I suppose from the answer, in my situation it's impossibile to assign another IP addess as gateway, on the second router, to allow the guest WiFi access internet. Thanks for you supporting answers!

Hi! Thanks for your attention and support, I have 2 Kineetic Air, one plced in the office with internet connection, the second installed quite far from the first, in the main room where I need to open the SSID for guests. The router may working in mesh.. but I suppose it's a bit long to learn (even if I'm skilled on IP, I've never did that Keenetic mesh before) and also, there are devices connected to the second router ports, it means I can't use only one VLAN for mesh, I need also to bridge the eth ports of the first router with the second one. So I created 2 different SSID for the main LAN, and for me like this can be ok, but the problem is that I can't give a gateway to the subnet of guest LAN created on second router, even if I configure the defaoult route.. Explaingin by data, this is the layout First router has 192.168.1.1 and WAN connected to internet Second router is connected with a LAN port to the first one (WAN is disconnected), it has 192.168.1.2 and WiFi Guest with 10.0.0.1/24. In the routing I've added the default route is 0.0.0.0 0.0.0.0 with gateway 192.168.1.1, but the netwotk 10.0.0.1 still has no access, NAT is enabled. How can I overcome this problem? Thank you