maemelyanov

In this text, I meant that: Network: IP address: 192.168.1.1 Subnet mask: 255.255.255.0 (/24) I divided it into three parts according to the created segments: a) Segment "Home network" (segments/Bridge0): IP address: 192.168.1.1 Subnet mask: 255.255.255.224 (/27) b) Segment "Guest network" (segments/Bridge1): IP address: 192.168.1.32 Subnet mask: 255.255.255.224 (/27) c) Segment "WorkStation network" (segments/Bridge3): IP address: 192.168.1.96 Subnet mask: 255.255.255.224 (/27) Yes, saved successfully. Got it. I'll send it in the next post.

Colleagues, hello everyone! I ask for your help, because I did not find the answer to my problem! I will be very glad if you tell me the solution to my problem! Model: Keenetic Ultra (KN-1810) System Update: OS version: 4.2.6.3 What I want to do and what I did. What I want to do: - by DHCP, for each segment, assign a pool of IP addresses, in one network. - and for the Internet to work in each segment. What I did: a) segment "Home network", (segments/Bridge0): IP Settings Specify the IP parameters for "NW Home": IP address: 192.168.1.1 Subnet mask: 255.255.255.224 (/27) - DHCP settings: Starting IP of the pool: 192.168.1.3 Address pool size: 28 - Gateway IP: did not specify - Use NAT: enable b) segment "Guest network", (segments/Bridge1): IP Settings Specify the IP parameters for "NW Guest": IP address: 192.168.1.32 Subnet mask: 255.255.255.224 (/27) - DHCP settings: Starting IP of the pool: 192.168.1.33 Address pool size: 30 - Gateway IP: did not specify - Use NAT: enable c) segment "WorkStation network", (segments/Bridge3): IP Settings Specify the IP parameters for "NW WorkStation": IP address: 192.168.1.96 Subnet mask: 255.255.255.224 (/27) - DHCP settings: Starting IP of the pool: 192.168.1.97 Address pool size: 30 - Gateway IP: did not specify - Use NAT: enable As a result, I get this: - crushed: IP address: 192.168.1.1 Subnet mask: 255.255.255.0 (/24) - into three parts, each segment with 30 IP addresses via Subnet mask BUT, at the same time: a) the "Home network" segment (segments/Bridge0): - works properly, both by wire and by Wi-Fi. And all other segments: - devices connect, but there is no access to the Internet. Please tell me what is the reason?