renne

Does the HTTP proxy in KeneeticOS support IPv6?

Tailscale is available as an open package in the open package manager. It should be no problem for the devs to add some web UI voodoo. Tailscale in short: Tailscale is a control plane for Wireguard managing the configuration of the nodes. It easily creates a mesh-overlay network with NAT traversal and access control lists. All configuration is done via the web interface or the API of the control server. Btw. there is an open-source control server called headscale.

Currently only cloud access is available for KeenDNS with IPv6. Please add the option to use direct access in KeenDNS with IPv6.

KeenDNS sets AAAA records if IPv6 mode with cloud access is enabled. But still no AAAA records for DDNS.

KeenDNS does not set an AAAA record either.

The log says: I [May 8 12:34:30] ndm: DynDns::Profile: "_WEBADMIN": IPv4: updated successfully. W [May 8 12:34:30] ndm: DynDns::Profile: "_WEBADMIN": IPv6 update not run (not run). Why does the IPv6 update not run? Do I have to enable it separately?

I found the solution: ipv6 local-prefix fd00:0:0::/48 ipv6 subnet Default number 1

INWX uses https://dyndns.inwx.com/nic/update?myip=<ipaddr>&myipv6=<ip6addr> as update_url. Both, the IPv4 and the IPv6 address have to be updated in a single call to the API. KeeneticOS seems to send the IPv4 address and no IPv6 address. How can we enable IPv6 for DynDNS? Thanx for any hint!

Quick answer, thanks! How can we assign fd00:0:0:1::/64 to the LAN subnet? Is there a reference chart with all the KeeneticOS CLI commands?

Hi, today we received the first Keenetic router! How can we enable local IPv6 hostname resolution on the Hopper DSL?

Hi, today we received the first Keenetic router! How can we enable an IPv6 ULA prefix on the Hopper DSL including advertisement to the subnet?