Jump to content

Dmytro Bezkrovnyi

Forum Members
  • Posts

    2
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Dmytro Bezkrovnyi

  1. issue was solved, thanks Andrew from support team: Please enter the following CLI commands on your Titan: https://support.keenetic.com/titan/kn-1812/en/18480-command-line-interface--cli-.html interface GigabitEthernet1/0 no flowcontrol system configuration save After that, please restart your Keenetic and check the situation again.
  2. Wi-Fi → WAN upload collapses to 30-50 Mbps without IntelliQoS (KN-1812, KeeneticOS 5.0.7) ENVIRONMENT Router: Keenetic Titan KN-1812, KeeneticOS 5.00.C.7.0-0 ISP: Magyar Telekom, fiber GPON, 1 Gbps symmetric Topology: MBP (Wi-Fi 6) → Keenetic → Magenta Box (Technicolor FGA2235, DMZ mode) → ISP Wi-Fi client: MacBook Pro M1 Max (BCM4387), 5 GHz, 2SS/80MHz, 802.11ax MBP is the only client on 5 GHz band IntelliQoS config when enabled: CAKE, input 890 Mbps, output 500 Mbps PROBLEM When IntelliQoS is disabled (no qos), Wi-Fi upload through WAN drops to 30-50 Mbps. With IntelliQoS enabled (CAKE, output 500 Mbps), upload is stable at ~480 Mbps. I would expect that removing the 500 Mbps shaper would increase or maintain upload speed, not collapse it by 10x. DIAGNOSTIC RESULTS Upload throughput (same iperf3 server, same time of day): Pi-hole, Ethernet → Keenetic → WAN, QoS OFF: 846 Mbps MBP, Wi-Fi 5GHz → Keenetic → WAN, QoS OFF: 23-51 Mbps MBP, Wi-Fi 5GHz → Keenetic → WAN, QoS ON (500): 480 Mbps MBP, Wi-Fi 5GHz → Keenetic → LAN (iperf3), QoS OFF: 595 Mbps MBP, Wi-Fi 5GHz → Magenta Box Wi-Fi → WAN, QoS OFF: 610 Mbps Desktop, Ethernet → Keenetic → WAN, QoS OFF: 450-640 Mbps Desktop, Ethernet → Magenta Box directly, QoS OFF: 980 Mbps Key observations: 1. Wi-Fi LAN throughput = 595 Mbps (iperf3) — Wi-Fi radio works fine 2. Ethernet upload through same WAN path = 846 Mbps — WAN path works fine 3. MBP on Magenta Box Wi-Fi directly = 610 Mbps — MBP Wi-Fi chip works fine 4. PHY rate during test: TX 1201, RX 960-1080 Mbps, RSSI -67...-69 — stable 5. WAN interface stats: 0 txdropped, 0 txerrors 6. Problem is specific to Wi-Fi → WAN forwarding without CAKE What I tested (none helped): - Disabled hardware PPE (no ppe hardware) — upload still 44 Mbps - Disabled TSO on MBP (sysctl net.inet.tcp.tso=0) — upload still 45 Mbps QUESTION Is this expected behavior? It appears that the default queueing on the WAN egress path cannot handle Wi-Fi-originated traffic properly. CAKE fixes it, but requires an artificial bandwidth limit (500 Mbps) which caps upload below ISP capacity (980 Mbps). Is there a way to enable CAKE/fq_codel without bandwidth limiting? Or another setting to fix Wi-Fi → WAN forwarding without IntelliQoS?
×
×
  • Create New...