Jump to content

Stun для entware

Mihail_Boyanskiy
 Share

Recommended Posts

TheBB Honored Flooder

TheBB

Posted
Posted

coturn

libevent2-extra_2.1.11-2_mipsel-3.4.ipk

libsocket_2.5.0-1_mipsel-3.4.ipk

coturn_4.5.2-1_mipsel-3.4.ipk

Скрытый текст 

~ # /opt/etc/init.d/S99turnserver start
 Starting turnserver...              done. 
~ # 
~ # /opt/etc/init.d/S99turnserver check
 Checking turnserver...              alive. 
~ # 
~ # cat /opt/var/log/turn_2021-01-21.log 
0: : log file opened: /opt/var/log/turn_2021-01-21.log
0: : Listener address to use: 127.0.0.1
0: : Aux server: 127.0.0.1
0: : Relay address to use: 127.0.0.1
0: : 
RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server
Version Coturn-4.5.2 'dan Eider'
0: : 
Max number of open files/sockets allowed for this process: 4096
0: : 
Due to the open files/sockets limitation,
max supported number of TURN Sessions possible is: 1000 (approximately)
0: : 

==== Show him the instruments, Practical Frost: ====

0: : TLS supported
0: : DTLS supported
0: : DTLS 1.2 supported
0: : TURN/STUN ALPN supported
0: : Third-party authorization (oAuth) is not supported
0: : OpenSSL compile-time version: OpenSSL 1.1.1h  22 Sep 2020 (0x1010108f)
0: : 
0: : SQLite supported, default database location is /opt/var/lib/turn/turndb
0: : Redis is not supported
0: : PostgreSQL is not supported
0: : MySQL is not supported
0: : MongoDB is not supported
0: : 
0: : Default Net Engine version: 2 (UDP thread per network endpoint)

=====================================================

0: : Domain name: WORKGROUP
0: : Default realm: WORKGROUP
0: : SSL23: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : SSL23: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : TLS1.0: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : TLS1.0: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : TLS1.1: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : TLS1.1: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : TLS1.2: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : TLS1.2: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : TLS cipher suite: DEFAULT
0: : DTLS: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : DTLS: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : DTLS1.2: Certificate file found: /opt/etc/turnserver/turn_server_cert.pem
0: : DTLS1.2: Private key file found: /opt/etc/turnserver/turn_server_pkey.pem
0: : DTLS cipher suite: DEFAULT
0: : log file opened: /opt/var/log/turn_2021-01-21.log
0: : pid file created: /opt/var/run/turnserver.pid
0: : IO method (main listener thread): epoll (with changelist)
0: : WARNING: I cannot support STUN CHANGE_REQUEST functionality because only one IP address is provided
0: : Wait for relay ports initialization...
0: :   relay 127.0.0.1 initialization...
0: :   relay 127.0.0.1 initialization done
0: : Relay ports initialization done
0: : IO method (general relay thread): epoll (with changelist)
0: : IO method (general relay thread): epoll (with changelist)
0: : IO method (udp listener/relay thread): epoll (with changelist)
0: : turn server id=0 created
0: : IO method (general relay thread): epoll (with changelist)
0: : turn server id=1 created
0: : IO method (general relay thread): epoll (with changelist)
0: : turn server id=128 created
0: : turn server id=2 created
0: : turn server id=3 created
0: : IO method (udp listener/relay thread): epoll (with changelist)
0: : turn server id=129 created
0: : IO method (udp listener/relay thread): epoll (with changelist)
0: : turn server id=130 created
0: : Total UDP servers: 3
0: : Total General servers: 4
0: : IO method (auth thread): epoll (with changelist)
0: : IO method (auth thread): epoll (with changelist)
0: : IO method (admin thread): epoll (with changelist)
0: : SQLite DB connection success: /opt/var/lib/turn/turndb
0: : Keep GID: root(0)
0: : Keep UID: root(0)
~ #

 

 

  • Upvote 1
Link to comment
Share on other sites
TheBB Honored Flooder

TheBB

Posted
Posted

прикручена одна база - sqlite3 (mysql, postgresql, redis, mongodb - идут тёмным лесом, широким полем), конфиг править под свои нужды (приведённый - для теста на работу), серты - генерить... в общем - читать доки.

Link to comment
Share on other sites
Mihail_Boyanskiy Advanced Member

Mihail_Boyanskiy

Posted
  • Author
Posted (edited)

Спасибо конечно, но меня интересовали не turn-server, а скорее Stun и по большей части client. для обмена информацией с другими stun (не turn) серверами. Исходники можно глянуть тут: https://freefr.dl.sourceforge.net/project/stun/stun/0.97/stund-0.97.tgz

Edited by Mihail_Boyanskiy
Link to comment
Share on other sites
TheBB Honored Flooder

TheBB

Posted
Posted
8 часов назад, Mihail_Boyanskiy сказал:

а скорее Stun

по умолчанию работают оба-два stun+turn, остальное зависит от желания пользователя: или stun, или turn

8 часов назад, Mihail_Boyanskiy сказал:

по большей части client

угу, напр., туть (из вики прожекта)

8 часов назад, Mihail_Boyanskiy сказал:

Исходники можно глянуть тут...

хорошечно, раз отговаривать "архиологов" смысла неть, то:

stund_0.97-1_mipsel-3.4.ipk

stun-client_0.97-1_mipsel-3.4.ipk

8 часов назад, Mihail_Boyanskiy сказал:

Но это я не собирал

а я собрал )))

stunclient_1.2.16-1_mipsel-3.4.ipk

stunserver_1.2.16-1_mipsel-3.4.ipk

stuntestcode_1.2.16-1_mipsel-3.4.ipk

  • Thanks 1
  • Upvote 1
Link to comment
Share on other sites
  • 10 months later...
Sano Member

Sano

Posted
Posted
В 24.01.2021 в 18:28, TheBB сказал:

а я собрал )))

 

Спасибо Вам за труды. А подскажите начинающему, как этот .ipk установить на роутер?

Entware поставил. Как пакет установить?

 

 

Link to comment
Share on other sites
TheBB Honored Flooder

TheBB

Posted
Posted
11 час назад, Sano сказал:

Как пакет установить?

Загружаете на устройство, набираете "opkg install /path/to/pkg" , где /path/to/pkg - путь к нужному пакету, напр., `opkg install stuntestcode_1.2.16-1_mipsel-3.4.ipk`

Link to comment
Share on other sites
Sano Member

Sano

Posted
Posted (edited)
2 часа назад, TheBB сказал:

Загружаете на устройство, набираете "opkg install /path/to/pkg" , где /path/to/pkg - путь к нужному пакету, напр., `opkg install stuntestcode_1.2.16-1_mipsel-3.4.ipk`

Спасибо большое еще раз

 

Edited by Sano
Link to comment
Share on other sites
  • 1 year later...
Sano Member

Sano

Posted
Posted

Добрый день. После очередного обновления через команду opkg Upgrade (на кой пёс я ее запустил, черт видимо дёрнул), перестал работать stun клиент. Выдает ошибку :

stunclient: /usr/lib/libcrypto.so.1.1: version `OPENSSL_1_1_0' not found (required by stunclient)

Как исправить? Я в линуксе не бум-бум.

Link to comment
Share on other sites
TheBB Honored Flooder

TheBB

Posted
Posted
10 минут назад, Sano сказал:

stunclient: /usr/lib/libcrypto.so.1.1: version `OPENSSL_1_1_0' not found (required by stunclient)

Для начала попробовать: 

opkg install libopenssl-legacy

если не взлетит, надо будут пересобрать

Link to comment
Share on other sites
Sano Member

Sano

Posted
Posted
5 минут назад, TheBB сказал:

если не взлетит, надо будут пересобрать

Не прокатило. Выдает ту же ошибку (

Link to comment
Share on other sites
TheBB Honored Flooder

TheBB

Posted
Posted
4 часа назад, TheBB сказал:

если не взлетит, надо будут пересобрать 

opkg install http://bin.entware.net/mipselsf-k3.4/test/stunclient_1.2.16-2_mipsel-3.4.ipk

(там же - stunserver, stuntestcode). Если нужны под aarch64||mips - можно будет собрать и залить...

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...