Meccep45 Posted June 30, 2021 Posted June 30, 2021 <?php echo '<pre>', var_dump(getenv('MAGIC')), '</pre>'; отвечает bool(false) как его настроить? что бы побороть ошибки. где эту базу брать. mime_content_type(): Failed identify data 0:bad magic in `(null)' mime_content_type(): Failed to load magic database. Quote
TheBB Posted June 30, 2021 Posted June 30, 2021 (edited) ~ # ~ # env | grep ^MAG ~ # ~ # php -i | grep MAGIC ~ # ~ # export MAGIC="/opt/share/misc/magic" ~ # ~ # env | grep ^MAG MAGIC=/opt/share/misc/magic ~ # ~ # php -i | grep MAGIC MAGIC => /opt/share/misc/magic $_SERVER['MAGIC'] => /opt/share/misc/magic $_ENV['MAGIC'] => /opt/share/misc/magic ~ # ~ # --- ~ # ~ # cat fileinfo.php <?php echo '<pre>', var_dump(getenv('MAGIC')), '</pre>'; ~ # ~ # php ./fileinfo.php <pre>string(21) "/opt/share/misc/magic" </pre>~ # ~ # Edited June 30, 2021 by TheBB add 1 Quote
TheBB Posted June 30, 2021 Posted June 30, 2021 8 часов назад, Meccep45 сказал: где эту базу брать. opkg install file - https://www.php.net/manual/ru/book.fileinfo.php Цитата ... Если не указан полный путь, будет использована переменная окружения MAGIC. Если переменная окружения не указана, то будет использоваться встроенная в PHP магическая база данных... Quote
Meccep45 Posted June 30, 2021 Author Posted June 30, 2021 (edited) базу нашёл сам. я не лодырь. export MAGIC="/opt/share/misc/magic" что то не записался. ручонками вписал в \etc\profile и прописал в php.ini [mime_magic] mime_magic.magicfile = "/opt/share/misc/magic" ;mime_magic.debug = On Edited June 30, 2021 by Meccep45 1 Quote
TheBB Posted June 30, 2021 Posted June 30, 2021 45 минут назад, Meccep45 сказал: export MAGIC="/opt/share/misc/magic" что то не записался. ручонками вписал в \etc\profile Ессно, при перезагрузке будет сброшено, да и до входа в систему, окружение другое. Можно экспорт вписать в стартовый скрипт (сервера или php). 49 минут назад, Meccep45 сказал: и прописал в php.ini При `opkg install --force-overwrite php7` конфиг будет полностью перезаписан, лучше вписать в свой, напр., `/opt/etc/php7/user.ini` (пользовательский конфиг (user.ini) можно обзывать по своему усмотрению). Quote
Meccep45 Posted July 6, 2021 Author Posted July 6, 2021 что-то не завелось. и 7 не 8. как протестировать встроенный в php? кто шалит приложение, модуль или мои ручонки. склонен к третьему. Скрытый текст 2021/07/04 08:28:31 [error] 25715#0: *65 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught ValueError: Path cannot be empty in /opt/share/nginx/html/Sources/Subs.php:5617 Stack trace: #0 /opt/share/nginx/html/Sources/Subs.php(5617): mime_content_type('/opt/share/ngin...') #1 /opt/share/nginx/html/Sources/Subs.php(5667): get_mime_type('/opt/share/ngin...', true) #2 /opt/share/nginx/html/Sources/Profile-Modify.php(3530): check_mime_type('/opt/share/ngin...', 'image/', true) #3 /opt/share/nginx/html/Sources/Profile-Modify.php(822): profileSaveAvatarData('upload') #4 /opt/share/nginx/html/Sources/Profile.php(725): saveProfileFields() #5 /opt/share/nginx/html/index.php(187): ModifyProfile() #6 {main} thrown in /opt/share/nginx/html/Sources/Subs.php on line 5617" while reading response header from upstream, client: 00.00.00.00, server: 00.00.00.00, request: "POST /index.php?action=profile;area=forumprofile;u=1 HTTP/2.0", upstream: "fastcgi://unix:/opt/var/run/php8-fpm/php8-fpm.sock:", host: "00.00.00.00", referrer: "https://00.00.00.00/index.php?action=profile;area=forumprofile;u=1" 2021/07/04 11:04:28 [error] 25715#0: *301 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught ValueError: Path cannot be empty in /opt/share/nginx/html/Sources/Subs.php:5617 Stack trace: #0 /opt/share/nginx/html/Sources/Subs.php(5617): mime_content_type('/opt/tmp/phphjX...') #1 /opt/share/nginx/html/Sources/Attachments.php(329): get_mime_type('/opt/tmp/phphjX...', true) #2 /opt/share/nginx/html/Sources/Attachments.php(201): Attachments->processAttachments() #3 /opt/share/nginx/html/Sources/Attachments.php(139): Attachments->add() #4 /opt/share/nginx/html/index.php(187): Attachments->call() #5 {main} thrown in /opt/share/nginx/html/Sources/Subs.php on line 5617" while reading response header from upstream, client: 00.00.00.00, server: 00.00.00.00, request: "POST /index.php?action=uploadAttach;sa=add;d490270f=de07bc1d1822120817ef6a193a8ea7b1;board=1 HTTP/2.0", upstream: "fastcgi://unix:/opt/var/run/php8-fpm/php8-fpm.sock:", host: "00.00.00.00", referrer: "https://00.00.00.00/index.php?action=post;topic=1.0;last_msg=1" Quote
TheBB Posted July 6, 2021 Posted July 6, 2021 Что это за проект такой? Где брали php8? Скрытый текст ~ # ~ # php fileinfo.php Warning: finfo_open(): Failed to load magic database at "(null)" in /opt/root/fileinfo.php on line 2 Fatal error: Uncaught ValueError: Path cannot be empty in /opt/root/fileinfo.php:2 Stack trace: #0 /opt/root/fileinfo.php(2): finfo_open(16) #1 {main} thrown in /opt/root/fileinfo.php on line 2 ~ # ~ # ~ # export MAGIC="/opt/share/misc/magic" ~ # ~ # ~ # php fileinfo.php directory application/octet-stream text/x-shellscript text/plain text/x-php text/plain application/octet-stream directory application/gzip application/gzip application/gzip application/gzip application/x-executable text/plain text/plain application/x-executable text/plain application/gzip application/gzip text/x-php application/gzip application/gzip text/x-php text/html directory application/gzip text/x-php application/gzip application/gzip application/gzip application/gzip application/gzip text/x-php application/gzip application/gzip application/x-bzip2 text/plain application/json directory directory directory directory application/gzip application/gzip application/gzip directory directory application/gzip application/gzip application/gzip application/gzip application/gzip directory application/x-empty application/gzip ~ # ~ # ~ # cat fileinfo.php <?php $finfo = finfo_open(FILEINFO_MIME_TYPE); // возвращает mime-тип foreach (glob("*") as $filename) { echo finfo_file($finfo, $filename) . "\n"; } finfo_close($finfo); ?> ~ # ~ # ~ # strace -ffff -vvvv -e openat php fileinfo.php openat(AT_FDCWD, "/opt/lib/tls/libcrypt.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/opt/lib/libcrypt.so.1", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libxml2.so.2", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libpcre2-8.so.0", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/lib/libiconv.so.2", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/etc/localtime", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "/opt/bin/php-cli.ini", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/opt/etc/php-cli.ini", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/opt/bin/php.ini", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/opt/etc/php.ini", O_RDONLY) = 3 openat(AT_FDCWD, "/opt/etc/php8", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_CLOEXEC|O_DIRECTORY) = 3 openat(AT_FDCWD, "/opt/etc/php8/20_fileinfo.ini", O_RDONLY) = 3 openat(AT_FDCWD, "/opt/lib/php/fileinfo.so", O_RDONLY|O_CLOEXEC) = 3 openat(AT_FDCWD, "fileinfo.php", O_RDONLY) = 3 openat(AT_FDCWD, "/opt/share/misc/magic", O_RDONLY) = 3 openat(AT_FDCWD, "/opt/share/misc/magic", O_RDONLY) = 3 openat(AT_FDCWD, ".", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_CLOEXEC|O_DIRECTORY) = 3 openat(AT_FDCWD, "/opt/root/Downloads", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/GeoLiteCity.dat", O_RDONLY) = 3 application/octet-stream openat(AT_FDCWD, "/opt/root/S80oc", O_RDONLY) = 3 text/x-shellscript openat(AT_FDCWD, "/opt/root/after.log", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/apc.php", O_RDONLY) = 3 text/x-php openat(AT_FDCWD, "/opt/root/before.log", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/composer.phar", O_RDONLY) = 3 application/octet-stream openat(AT_FDCWD, "/opt/root/configuration.yaml", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/coreutils-rs_0.0.2-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/coturn_4.5.2-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/dbus-utils_1.13.18-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/dbus_1.13.18-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/dnsproxy", O_RDONLY) = 3 application/x-executable openat(AT_FDCWD, "/opt/root/dnsproxy.log", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/dnsproxy_2.log", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/dnsproxy_a", O_RDONLY) = 3 application/x-executable openat(AT_FDCWD, "/opt/root/entw.txt", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/filebrowser_2.15.0-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/filebrowser_2.15.0-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/fileinfo.php", O_RDONLY) = 3 text/x-php openat(AT_FDCWD, "/opt/root/gcc_7.4.0-6a_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/gcc_7.4.0-6b_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/geoip.inc", O_RDONLY) = 3 text/x-php openat(AT_FDCWD, "/opt/root/geoip2.phar", O_RDONLY) = 3 text/html openat(AT_FDCWD, "/opt/root/hb", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/homeassistant_2021.4.4-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/installer", O_RDONLY) = 3 text/x-php openat(AT_FDCWD, "/opt/root/libdbus_1.13.18-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/libevent2-extra_2.1.11-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/libndm_1.1.15-1_mipsel-3.4_kn.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/libp11_0.4.11-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/libsocket_2.5.0-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/lua.php", O_RDONLY) = 3 text/x-php openat(AT_FDCWD, "/opt/root/ndmq_1.0.2-7_mipsel-3.4_kn.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/odoh-client-go_0-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/owncloud-10.5.0.tar.bz2", O_RDONLY) = 3 application/x-bzip2 openat(AT_FDCWD, "/opt/root/owrt.txt", O_RDONLY) = 3 text/plain openat(AT_FDCWD, "/opt/root/package-lock.json", O_RDONLY) = 3 application/json openat(AT_FDCWD, "/opt/root/pkg", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/pkg2", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/pkg3", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/pkg4", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/poorbox_1.33.0-2_mipsel-3.4_kn.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/python3-aiohomekit_0.2.61-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/qbittorrent_4.3.4.1-2_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/rust", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/startup", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/stun-client_0.97-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/stunclient_1.2.16-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/stund_0.97-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/stunserver_1.2.16-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/stuntestcode_1.2.16-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip openat(AT_FDCWD, "/opt/root/test-hg", O_RDONLY) = 3 directory openat(AT_FDCWD, "/opt/root/test.file", O_RDONLY) = 3 application/x-empty openat(AT_FDCWD, "/opt/root/xupnpd-live_2020-01-25-1_mipsel-3.4.ipk", O_RDONLY) = 3 application/gzip +++ exited with 0 +++ ~ # 4 часа назад, Meccep45 сказал: как протестировать встроенный в php? не сисадмин, не сетевик... для проверки беру примеры из (напр.) https://www.php.net/manual/ru/function.finfo-file.php Quote
Meccep45 Posted July 6, 2021 Author Posted July 6, 2021 (edited) тута стащил php8. как раз mipsel. на entware. Edited July 6, 2021 by Meccep45 Quote
Meccep45 Posted July 6, 2021 Author Posted July 6, 2021 пытаюсь поставить smf forum. но вся загвоздка в этом модуле. Quote
TheBB Posted July 6, 2021 Posted July 6, 2021 2 часа назад, Meccep45 сказал: пытаюсь поставить smf forum. но вся загвоздка в этом модуле. какую версию, т.к. https://wiki.simplemachines.org/smf/SMF2.0:Requirements_and_recommendations Цитата РНР 4.1.0 or higher. Please note that PHP 8 is not supported at this time. Versions of SMF below 2.0.7 will not work on PHP 5.5. If you use PHP 5.5 it is necessary to use SMF 2.0.7 or greater. Versions of SMF from 2.0.16 require a version of PHP between 5.3 and 7.3. If you use PHP 5.3 or lower, it is necessary to use SMF 2.0.13 or lower or SMF 2.0.16 or higher. This is because 2.0.14 and 2.0.15 do not support PHP 5.3. PHP 7.4 is supported by SMF 2.0.17 or higher. Quote
TheBB Posted July 6, 2021 Posted July 6, 2021 2 часа назад, TheBB сказал: Цитата Please note that PHP 8 is not supported at this time. Нас снова обманули... ~ # ls smf* smf_2-0-18_install.tar.gz smf_2-0-18_russian-utf8.tar.gz ~ # Скрытый текст ~ # ~ # php -v PHP 8.0.3 (cli) ( NTS ) Copyright (c) The PHP Group Zend Engine v4.0.3, Copyright (c) Zend Technologies ~ # ~ # php -m [PHP Modules] Core date fileinfo filter hash json libxml mysqli mysqlnd openssl pcre PDO pdo_mysql posix Reflection session SPL standard zlib [Zend Modules] ~ # ... [06-Jul-2021 17:36:03 Europe/Moscow] PHP Deprecated: Required parameter $table follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:03 Europe/Moscow] PHP Deprecated: Required parameter $columns follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:03 Europe/Moscow] PHP Deprecated: Required parameter $data follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:03 Europe/Moscow] PHP Deprecated: Required parameter $keys follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:09 Europe/Moscow] PHP Deprecated: Required parameter $table follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:09 Europe/Moscow] PHP Deprecated: Required parameter $columns follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:09 Europe/Moscow] PHP Deprecated: Required parameter $data follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 [06-Jul-2021 17:36:09 Europe/Moscow] PHP Deprecated: Required parameter $keys follows optional parameter $method in /opt/share/www/smf/Sources/Subs-Db-mysql.php on line 1456 1 Quote
Meccep45 Posted July 6, 2021 Author Posted July 6, 2021 PHP 7.4 поддерживается SMF 2.0.17 и выше. я взял 2.1rc3 с github. русский не ставил (сам делаю потихоньку) кривой он у них. от этого бывают проблемы. Quote
Meccep45 Posted July 7, 2021 Author Posted July 7, 2021 [07-Jul-2021 14:10:30 Europe/Moscow] PHP Warning: mime_content_type(): Failed to load magic database in /opt/share/nginx/html/fileinfo.php on line 2 [07-Jul-2021 14:10:30 Europe/Moscow] PHP Warning: mime_content_type(): Failed identify data 0:bad magic in `(null)' in /opt/share/nginx/html/fileinfo.php on line 2 [07-Jul-2021 14:10:30 Europe/Moscow] PHP Fatal error: Uncaught ValueError: Path cannot be empty in /opt/share/nginx/html/fileinfo.php:2 Stack trace: #0 /opt/share/nginx/html/fileinfo.php(2): mime_content_type('apple-touch-ico...') #1 {main} thrown in /opt/share/nginx/html/fileinfo.php on line 2 похоже нет базы в самом phpX-mod-fileinfo или плохая. то есть встроенное в php работать не будет. я думал поставил модуль и вот оно счастье. ~ # php-cli ./fileinfo.php ~ # ~ # cat ./fileinfo.php <?php echo(mime_content_type('apple-touch-icon.png')); // returns image/png ?> ~ # Quote
Meccep45 Posted July 7, 2021 Author Posted July 7, 2021 вот как должен был ответить рабочий phpX-mod-fileinfo. эхехе. C:\Users\Mecce\Downloads\php-7.4.21-nts-Win32-vc15-x64>php fileinfo.php image/png C:\Users\Mecce\Downloads\php-7.4.21-nts-Win32-vc15-x64> Quote
Meccep45 Posted July 7, 2021 Author Posted July 7, 2021 Благодарю TheBB направил в нужное русло. может починят в PHP 7 и в текущем тестовом PHP 8.0.3 Quote
Meccep45 Posted July 7, 2021 Author Posted July 7, 2021 opkg install php8-mod-fileinfo opkg install file без него у fileinfo базы видимо нет. echo export MAGIC="/opt/share/misc/magic" >> /opt/etc/profile записал переменную. php.ini изменил memory_limit = 32M на 8, 16 ругался. мозги говорит мозги. открываю файл в консоли. ~ # cat /opt/share/nginx/html/fileinfo.php <?php echo(mime_content_type('/opt/share/nginx/html/apple-touch-icon.png')); // returns image/png ?>~ # ~ # php-cli /opt/share/nginx/html/fileinfo.php image/png~ # ответ верный php распознал. если по http открыть снова здравствуйте. 2021/07/08 00:49:53 [error] 574#0: *12 FastCGI sent in stderr: "PHP message: PHP Warning: mime_content_type(): Failed to load magic database in /opt/share/nginx/html/fileinfo.php on line 2PHP message: PHP Warning: mime_content_type(): Failed identify data 0:bad magic in `(null)' in /opt/share/nginx/html/fileinfo.php on line 2PHP message: PHP Fatal error: Uncaught ValueError: Path cannot be empty in /opt/share/nginx/html/fileinfo.php:2 Stack trace: #0 /opt/share/nginx/html/fileinfo.php(2): mime_content_type('/opt/share/ngin...') #1 {main} где то переменную искать. nginx, php-fpm Quote
TheBB Posted July 7, 2021 Posted July 7, 2021 (edited) http://bin.entware.net/mipselsf-k3.4/test/php8/ (coming soon )))) пытайте Скрытый текст ~/resources # ~/resources # env | grep ^MAG ~/resources # ~/resources # ls -al drwxr-xr-x 2 root root 4096 Jul 8 01:06 . drwxr-xr-x 24 root root 12288 Jul 8 01:05 .. -rw-r--r-- 1 root root 144810 Jun 1 21:43 67647.mov -rw-r--r-- 1 root root 10752 Jun 1 21:43 bug79756.xls -rw-r--r-- 1 root root 392 Jun 1 21:43 dir.zip -rw-r--r-- 1 root root 191 Jul 8 01:06 fileinfo.php -rw-r--r-- 1 root root 24 Jun 1 21:43 test.awk -rw-r--r-- 1 root root 58 Jun 1 21:43 test.bmp -rw-r--r-- 1 root root 43 Jun 1 21:43 test.gif -rw-r--r-- 1 root root 160 Jun 1 21:43 test.jpg -rw-r--r-- 1 root root 185 Jun 1 21:43 test.json -rw-r--r-- 1 root root 25801 Jun 1 21:43 test.mp3 -rw-r--r-- 1 root root 1605 Jun 1 21:43 test.pdf -rw-r--r-- 1 root root 93 Jun 1 21:43 test.png -rw-r--r-- 1 root root 99840 Jun 1 21:43 test.ppt -rw-r--r-- 1 root root 19 Jun 1 21:43 test.tga -rw-r--r-- 1 root root 4837 Jun 1 21:43 test.webm ~/resources # ~/resources # php fileinfo.php video/quicktime application/vnd.ms-excel application/zip text/x-php text/plain image/x-ms-bmp image/gif image/jpeg application/json audio/mpeg application/pdf image/png application/vnd.ms-powerpoint image/x-tga video/webm ~/resources # ~/resources # php -v PHP 8.0.7 (cli) ( NTS ) Copyright (c) The PHP Group Zend Engine v4.0.7, Copyright (c) Zend Technologies ~/resources # Edited July 11, 2021 by TheBB 1 Quote
Meccep45 Posted July 7, 2021 Author Posted July 7, 2021 (edited) 8.0.7 PHP Warning: PHP Startup: Unable to load dynamic library 'intl.so' (tried: /opt/lib/php8/intl.so (libicuio.so.69: cannot open shared object file: No such file or directory), /opt/lib/php8/intl.so.so (/opt/lib/php8/intl.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0 so или so.so Edited July 7, 2021 by Meccep45 Quote
TheBB Posted July 7, 2021 Posted July 7, 2021 (edited) icu_69.1-1_mipsel-3.4.ipk icu-full-data_69.1-1_mipsel-3.4.ipk Edited July 11, 2021 by TheBB 1 Quote
Meccep45 Posted July 8, 2021 Author Posted July 8, 2021 (edited) не знаю чо вы сделали. но вы волшебник. всё заработало. потестю немного. отпишусь. Edited July 8, 2021 by Meccep45 Quote
TheBB Posted July 8, 2021 Posted July 8, 2021 9 часов назад, Meccep45 сказал: не знаю чо вы сделали. но вы волшебник. всё заработало. потестю немного. отпишусь. "... Я не волшебник, я только учусь..." (х/ф "Золушка", 1947 г.) icu - нов. версия пакета (те, кто подписан на канал https://t.me/entware, уже в курсе, а не успевшим подписаться - (инсайдерская утечка) начало очередной синхронизации ))) ) пересобрал "fileinfo" - для встроенной базы используется файл "data_file.c", который генерится из "magic.mgc" ("magic.mgc" - скомпиленый файл базы, "magic" - текстовый, а в OpenWrt, ещё и "погрызенный" (+L92) sed`ом) # ls -lL /opt/share/misc/ -rw-r--r-- 1 root root 725132 May 26 14:09 magic -rw-r--r-- 1 root root 7035712 Jul 8 01:18 magic.mgc # # cat create_data_file.php #!/usr/bin/env php /* This is a generated file, do not modify */ /* Usage: php create_data_file.php /path/to/magic.mgc > data_file.c */ ... Из пропатченного "magic.mgc" генерится "data_file.c", размером ~ 42 MB (против ~ 40 MB в оригинале), diff (патч) из них выходит ~ 22 MB. Нафига оно нужно? См. ниже ( такая же фиговина и для php): /opt/bin # /opt/bin # file -m /opt/share/misc_orig/magic.mgc -L bash.file bash.file: a /opt/bin/bash script, ASCII text executable /opt/bin # /opt/bin # file -m /opt/share/misc_patch/magic.mgc -L bash.file bash.file: Bourne-Again shell script, ASCII text executable /opt/bin # /opt/bin # /opt/bin # file -m /opt/share/misc_orig/magic.mgc -L ldd ldd: a /opt/bin/sh script, ASCII text executable /opt/bin # /opt/bin # file -m /opt/share/misc_patch/magic.mgc -L ldd ldd: POSIX shell script, ASCII text executable /opt/bin # /opt/bin # /opt/bin # file -m /opt/share/misc_orig/magic.mgc -L wsrep_sst_mariabackup wsrep_sst_mariabackup: a /opt/bin/sh -ue script, ASCII text executable /opt/bin # /opt/bin # file -m /opt/share/misc_patch/magic.mgc -L wsrep_sst_mariabackup wsrep_sst_mariabackup: POSIX shell script, ASCII text executable /opt/bin # /opt/bin # /opt/bin # file -m /opt/share/misc_orig/magic.mgc -L zigbee2mqtt zigbee2mqtt: a /opt/bin/node script, ASCII text executable /opt/bin # /opt/bin # file -m /opt/share/misc_patch/magic.mgc -L zigbee2mqtt zigbee2mqtt: Node.js script, ASCII text executable /opt/bin # /opt/bin # /opt/bin # file -m /opt/share/misc_orig/magic.mgc -L file.php file.php: a /opt/bin/php script, ASCII text executable /opt/bin # /opt/bin # file -m /opt/share/misc_patch/magic.mgc -L file.php file.php: PHP script, ASCII text executable /opt/bin # "magic.mgc"/"magic" - значения не имеет; "/opt/share/misc_orig/magic.mgc" - оригинальный (не патченный); "/opt/share/misc_patch/magic.mgc" - патченный Quote
Meccep45 Posted April 18 Author Posted April 18 только решили в 7 версии и вот в 8 снова она. Скрытый текст [18-Apr-2024 05:16:22 Europe/Moscow] PHP Warning: mime_content_type(): Failed to load magic database in /opt/share/nginx/html/test.php on line 2 [18-Apr-2024 05:16:22 Europe/Moscow] PHP Warning: mime_content_type(): Failed identify data 0:File 543 supports only version 18 magic files. `(null)' is version 16 in /opt/share/nginx/html/test.php on line 2 [18-Apr-2024 05:16:22 Europe/Moscow] PHP Fatal error: Uncaught ValueError: Path cannot be empty in /opt/share/nginx/html/test.php:2 ~ # cat /opt/share/nginx/html/test.php <?php echo(mime_content_type('/opt/share/nginx/html/favicon/apple-touch-icon.png')); // returns image/png ?> ~ # 1 Quote
Meccep45 Posted April 18 Author Posted April 18 в этот раз решилось проще. скачал пакет file, добавил в файл www.conf переменную env[MAGIC] = /opt/share/misc/magic и всё завелось. Quote
TheBB Posted April 18 Posted April 18 8 часов назад, Meccep45 сказал: и вот в 8 снова она. Тут можно меня смело пинать и дать в глаз... подготовил, но пропустил-забыл. Если не критично - можно подождать до следующей синхронизации. Или? Будет так: ~ # file Example1.png Example1.png: PNG image data, 1337 x 1067, 8-bit/color RGB, non-interlaced ~ # ~ # php fileinfo.php; echo image/png ~ # 1 Quote
Meccep45 Posted April 18 Author Posted April 18 6 часов назад, TheBB сказал: подготовил, но пропустил-забыл я лучше руку протяну, чтоб спасибо сказать. за отзывчивость. Quote
.thumb.png.d69a8cb6fe2d87b9772a9e96c4d9975a.png){kind=avatar}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.