Jump to content

Тонель между Keenetic и TP-Link AX10 - OpenVPN


Recommended Posts

клиент Keenetec KN-2710

сервер TP-Link AX10

client
dev tun
proto udp
float
nobind
cipher AES-128-CBC
comp-lzo adaptive
resolv-retry infinite
remote-cert-tls server
persist-key
persist-tun
remote XXX.XXX.XXX.XXX 1194

 

лог
Network::Interface::Base: "OpenVPN7": interface is up.
Фев 13 20:39:13
ndm
Core::System::Configuration: saving (http/rci).
Фев 13 20:39:16
OpenVPN7
OpenVPN 2.4.6 [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [AEAD]
Фев 13 20:39:16
OpenVPN7
library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.10
Фев 13 20:39:16
OpenVPN7
UDP link local: (not bound)
Фев 13 20:39:16
OpenVPN7
UDP link remote: [AF_INET]XXX.XXX.XXX.XXX:1194
Фев 13 20:39:16
OpenVPN7
NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Фев 13 20:39:16
OpenVPN7
WARNING: 'dev-type' is used inconsistently, local='dev-type tap', remote='dev-type tun'
Фев 13 20:39:16
OpenVPN7
WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1590', remote='link-mtu 1558'
Фев 13 20:39:16
OpenVPN7
WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1500'
Фев 13 20:39:16
OpenVPN7
[server] Peer Connection Initiated with [AF_INET]XXX.XXX.XXX.XXX:1194
Фев 13 20:39:16
ndm
Network::Interface::OpenVpn: "OpenVPN7": connecting via ISP (GigabitEthernet1).
Фев 13 20:39:16
ndm
Network::Interface::OpenVpn: "OpenVPN7": added host route to remote endpoint XXX.XXX.XXX.XXX via YYY.YYY.YYY.YYY.
Фев 13 20:39:16
ndm
Core::System::Configuration: configuration saved.
Фев 13 20:39:17
OpenVPN7
WARNING: Since you are using --dev tap, the second argument to --ifconfig must be a netmask, for example something like 255.255.255.0. (silence this warning with --ifconfig-nowarn)
Фев 13 20:39:17
OpenVPN7
WARNING: --remote address [ZZZ.ZZZ.ZZZ.ZZZ] conflicts with --ifconfig subnet [10.8.0.10, 10.8.0.9] -- local and remote addresses cannot be inside of the --ifconfig subnet. (silence this warning with --ifconfig-nowarn)
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.8.0.0
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.8.0.0
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options
Фев 13 20:39:17
OpenVPN7
OpenVPN ROUTE: failed to parse/resolve route for host/network: 192.168.0.0
Фев 13 20:39:17
OpenVPN7
TUN/TAP device tap0 opened
Фев 13 20:39:17
OpenVPN7
do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Фев 13 20:39:17
ndm
Network::Interface::Ip: "OpenVPN7": IP address is 10.8.0.10/32.
Фев 13 20:39:17
OpenVPN7
GID set to nobody
Фев 13 20:39:17
OpenVPN7
UID set to nobody
Фев 13 20:39:17
OpenVPN7
Initialization Sequence Completed
Фев 13 20:39:18
ndm
Http::Nginx: loaded SSL certificate for "XXX.keenetic.io".
Фев 13 20:39:18
ndm
Core::Server: started Session /var/run/ndm.core.socket.
Фев 13 20:39:18
ndm
Core::Session: client disconnected.
Фев 13 20:39:18
ndm
Http::Manager: updated configuration.
Фев 13 20:39:18
ndm
Core::Server: started Session /var/run/ndm.core.socket.
Фев 13 20:39:18
ndm
Core::Session: client disconnected. 

 

Соединение поднимается, но связи хостами нет, нет пинга.

Это кривой VPN сервер на TP-LINK ?

 

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...