Jump to content

Не поднмиается автоматически туннель IPIPoverIPsec после перезагрузки "сервера"


Recommended Posts

Вот опять удалось повторить то, что было с самого появления IPIP-туннелей

Имеем: Ultra 2 (v2.08(AAUX.2)A12) - "сервер", Giga 2 на аналогичной прошивке - "клиент". Запускаем обновление Ultra 2 на .3, после обновления и перезагрузки ждем час, гигу 2 не трогаем.. А туннель все не поднимается...

Скрытый текст

Гига


(config)> show interface IPIP0

               id: IPIP0
            index: 0
             type: IPIP
      description:
   interface-name: IPIP0
             link: up
        connected: yes
            state: up
              mtu: 1420
         tx-queue: 0
          address: 192.168.100.2
             mask: 255.255.255.0
           uptime: 61961
           global: no
   security-level: private

Ультра


(config)> sh interface IPIP0

               id: IPIP0
            index: 0
             type: IPIP
      description:
   interface-name: IPIP0
             link: up
        connected: yes
            state: up
              mtu: 65516
         tx-queue: 0
          address: 192.168.100.1
             mask: 255.255.255.0
           uptime: 4386
           global: no
   security-level: private

 

Замечаем явно абсурдный MTU на ультре, перевключаем туннель на гиге, и все начинает работать

Скрытый текст

(config)> interface IPIP0 down
Network::Interface::Base: "IPIP0": interface is down.
(config)> show interface IPIP0

               id: IPIP0
            index: 0
             type: IPIP
      description:
   interface-name: IPIP0
             link: down
        connected: no
            state: down
              mtu: 1420
         tx-queue: 0
           global: no
   security-level: private

(config)> interface IPIP0 up
Network::Interface::Base: "IPIP0": interface is up.
(config)> show interface IPIP0

               id: IPIP0
            index: 0
             type: IPIP
      description:
   interface-name: IPIP0
             link: up
        connected: yes
            state: up
              mtu: 1420
         tx-queue: 0
          address: 192.168.100.2
             mask: 255.255.255.0
           uptime: 4
           global: no
   security-level: private

На ультре сразу нормализуется MTU


(config)> sh interface IPIP0

               id: IPIP0
            index: 0
             type: IPIP
      description:
   interface-name: IPIP0
             link: up
        connected: yes
            state: up
              mtu: 1420
         tx-queue: 0
          address: 192.168.100.1
             mask: 255.255.255.0
           uptime: 4665
           global: no
   security-level: private

 

Селфтесты до и после с обоих устройств ниже.

Edited by KorDen
Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...