Jump to content
  • 0

3.9 Alpha 8 | Нет подключение к сети 4G


XEGARE ᅠ
 Share

Question

Добрый день. На 3.9 Alpha 7 и на предварительной версии 3.8.5. Всё отлично работает и подключается. А на версии 3.9 Apha 8 подключения к сети нет. Прописывание точки APN тоже эффекта никакого не даёт. Новый компонент mDNS отключить нельзя, так что я не проверил в нём ли дело и ли нет.

Модем e3372h-153 STICK прошивка.

Использую только DoT/DoH DNS:

Скрытый текст

image.png.2637fa238532a66c9270832b9e3aef88.png

 

Скрытый текст

[E] Sep  8 10:49:32 ndm: Core::Ndss: [807] no internet connection. 
[E] Sep  8 10:49:34 ndm: Core::Configurator: not found: "components/list" [http/rci]. 
[I] Sep  8 10:49:50 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:49:50 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 0 /dev/ttyUSB0. 
[I] Sep  8 10:49:51 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:49:51 ndm: UsbLte::Connection: "UsbLte0": network ready. 
[E] Sep  8 10:49:52 ndm: Core::Ndss: [894] no internet connection. 
[I] Sep  8 10:49:55 ndm: Network::Interface::Rtx::WifiMonitor: "WifiMaster1/AccessPoint0": STA(7e:9f:3e:e5:87:53) had associated successfully (FT mode). 
[I] Sep  8 10:49:55 ndm: Network::Interface::Rtx::WifiMonitor: "WifiMaster1/AccessPoint0": STA(7e:9f:3e:e5:87:53) set key done in WPA2/WPA2PSK. 
[I] Sep  8 10:49:55 ndhcps: DHCPREQUEST received (STATE_INIT) for 192.168.1.140 from 7e:9f:3e:e5:87:53. 
[I] Sep  8 10:49:55 ndhcps: sending ACK of 192.168.1.140 to 7e:9f:3e:e5:87:53. 
[E] Sep  8 10:50:00 ndm: Core::Ndss: [928] no internet connection. 
[I] Sep  8 10:50:23 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:50:23 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 1 /dev/ttyUSB1. 
[I] Sep  8 10:50:24 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:50:24 ndm: UsbLte::Connection: "UsbLte0": network ready. 
[E] Sep  8 10:50:25 ndm: Core::Ndss: [1004] no internet connection. 
[E] Sep  8 10:50:36 ndm: Core::Ndss: [1028] no internet connection. 
[E] Sep  8 10:50:44 ndm: Core::Ndss: [1078] no internet connection. 
[E] Sep  8 10:50:48 ndm: Core::Ndss: [1107] no internet connection. 
[I] Sep  8 10:50:56 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:50:56 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 0 /dev/ttyUSB0. 
[I] Sep  8 10:50:57 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:50:57 ndm: UsbLte::Connection: "UsbLte0": network ready. 
[I] Sep  8 10:50:57 ndm: Network::Interface::Rtx::WifiMonitor: "WifiMaster1/AccessPoint0": STA(b0:f7:c4:e7:0c:eb) had associated successfully. 
[I] Sep  8 10:50:57 ndm: Network::Interface::Rtx::WifiMonitor: "WifiMaster1/AccessPoint0": STA(b0:f7:c4:e7:0c:eb) set key done in WPA2/WPA2PSK. 
[I] Sep  8 10:50:57 ndhcps: DHCPDISCOVER received from b0:f7:c4:e7:0c:eb. 
[I] Sep  8 10:50:57 ndhcps: making OFFER of 192.168.1.148 to b0:f7:c4:e7:0c:eb. 
[I] Sep  8 10:50:57 ndhcps: DHCPREQUEST received (STATE_SELECTING) for 192.168.1.148 from b0:f7:c4:e7:0c:eb. 
[I] Sep  8 10:50:58 ndhcps: sending ACK of 192.168.1.148 to b0:f7:c4:e7:0c:eb. 
[I] Sep  8 10:51:00 ndm: Dhcp::Client: WifiMaster0/WifiStation0 DHCP name servers are disabled. 
[I] Sep  8 10:51:00 ndm: Core::System::StartupConfig: saving (http/rci). 
[I] Sep  8 10:51:02 ndm: Dhcp::Client: UsbLte0 DHCP name servers are enabled. 
[I] Sep  8 10:51:02 ndm: Ip6::Dhcp::Client: accept name servers provided by the interface network. 
[I] Sep  8 10:51:02 ndm: Core::System::StartupConfig: saving (http/rci). 
[I] Sep  8 10:51:04 ndm: Core::System::StartupConfig: configuration saved. 
[I] Sep  8 10:51:29 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:51:29 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 1 /dev/ttyUSB1. 
[E] Sep  8 10:51:30 ndm: Core::Ndss: [1266] no internet connection. 
[I] Sep  8 10:51:31 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:51:31 ndm: UsbLte::Connection: "UsbLte0": network ready. 
[I] Sep  8 10:52:03 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:52:03 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 0 /dev/ttyUSB0. 
[I] Sep  8 10:52:04 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:52:04 ndm: UsbLte::Connection: "UsbLte0": network ready. 
[E] Sep  8 10:52:06 ndm: Core::Ndss: [1490] no internet connection. 
[E] Sep  8 10:52:31 ndm: Core::Ndss: [1675] no internet connection. 
[I] Sep  8 10:52:36 ndm: UsbLte::Connection: "UsbLte0": connection timeout. 
[W] Sep  8 10:52:36 ndm: Mobile::TtyDevice: "UsbLte0": switch tty to 1 /dev/ttyUSB1. 
[I] Sep  8 10:52:37 ndm: UsbLte::Connection: "UsbLte0": connection initialized. 
[I] Sep  8 10:52:37 ndm: UsbLte::Connection: "UsbLte0": network ready. 
 

 

  • Thanks 1
Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

@XEGARE ᅠ проверил на 21.286.03.01.209, проблем не нашел. Возможно 30 секундный интервал ожидания соединения, который повился в новой версии, недостаточен. Нужен селфтест.

Link to comment
Share on other sites

  • 0
5 минут назад, vst сказал:

@XEGARE ᅠ проверил на 21.286.03.01.209, проблем не нашел. Возможно 30 секундный интервал ожидания соединения, который повился в новой версии, недостаточен. Нужен селфтест.

не знаю такую версию. У меня 21.333.01.00.00 и да всегда на стик прошивке коннект происходил больше 30 секунд. У всех. Это на hilink в течении 5 секунд. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...