Jump to content

Keenetic Ultra (KN-1810) PPTP клиент перестал подключаться


Recommended Posts

Всем привет

Пару недель назад pptp клиент перестал подключаться ( к PureVPN и не только). Не могу найти решение.

Скрытый текст

Ноя 4 11:13:08 ndm
Core::System::StartupConfig: saving (coala/rci).
Ноя 4 11:13:08 pppd_PPTP0
Received Outgoing Call Reply.
Ноя 4 11:13:08 pppd_PPTP0
Outgoing call established (call ID 23, peer's call ID 44767).
Ноя 4 11:13:08 pppd_PPTP0
Using interface ppp0
Ноя 4 11:13:08 pppd_PPTP0
Connect: ppp0 <--> pptp (37.230.130.1)
Ноя 4 11:13:12 ndm
Core::System::StartupConfig: configuration saved.
Ноя 4 11:13:38 pppd_PPTP0
LCP: timeout sending Config-Requests
Ноя 4 11:13:38 pppd_PPTP0
Connection terminated.
Ноя 4 11:13:38 pppd_PPTP0
write: Bad file descriptor (9)
Ноя 4 11:13:38 pppd_PPTP0
Closing connection (unhandled)
Ноя 4 11:13:38 pppd_PPTP0
Sent control packet type is 12 'Call-Clear-Request'
Ноя 4 11:13:38 pppd_PPTP0
Closing connection (call state)
Ноя 4 11:13:38 pppd_PPTP0
Modem hangup
Ноя 4 11:13:38 pppd_PPTP0
write: Bad file descriptor (9)
Ноя 4 11:13:38 pppd_PPTP0
Exit.
Ноя 4 11:13:38 ndm
Service: "PPTP0": unexpectedly stopped.
Ноя 4 11:13:38 ndm
Network::Interface::Base: "PPTP0": interface is up.
Ноя 4 11:13:38 ndm
Network::Interface::PppTunnel: "PPTP0": remote endpoint is resolved to "46.243.239.2".
Ноя 4 11:13:38 ndm
Network::Interface::PppTunnel: "PPTP0": connecting via ISP (GigabitEthernet1).
Ноя 4 11:13:38 ndm
Network::Interface::PppTunnel: "PPTP0": local endpoint is resolved to "100.126.47.178".
Ноя 4 11:13:38 ndm
Network::Interface::PppTunnel: "PPTP0": added host route to 46.243.239.2 via 100.126.0.1 (GigabitEthernet1).
Ноя 4 11:13:38 ndm
Network::Interface::Ppp: "PPTP0": enabled connection via any interface.
Ноя 4 11:13:39 ndm
Network::Interface::Ppp: "PPTP0": connection service standby.
Ноя 4 11:13:39 ndm
Network::Interface::Base: "PPTP0": interface is down.
Ноя 4 11:13:39 ndm
Core::System::StartupConfig: saving (coala/rci).
Ноя 4 11:13:39 ndm
Network::Interface::PppTunnel: "PPTP0": interface state is changed, reconnecting.
Ноя 4 11:13:43 ndm
Core::System::StartupConfig: configuration saved.
Ноя 4 11:14:01 cron[1383]
(root) CMD (/opt/bin/run-parts /opt/etc/cron.1min^I)
Ноя 4 11:15:01 cron[1439]
(root) CMD (/opt/bin/run-parts /opt/etc/cron.5mins^I)
Ноя 4 11:15:01 cron[1438]
(root) CMD (/opt/bin/run-parts /opt/etc/cron.1min^I)

Keenetic Ultra (KN-1810)

KeeneticOS 3.8.5.4

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...