Jump to content
  • 0

42A17 ошибка на Buddy 6 "WifiDriverIo: system failed [0xcffd0a10], wireless request 0x8be2: invalid argument."


vasek00

Question

На Buddy 6 на 42А17 c контроллером 1811 ошибка на Buddy 6 - "WifiDriverIo - invalid argument"

 

Скрытый текст
[E] Jul 10 14:05:58 ndhcpc: Bridge1: unable to bind to raw socket. 
[I] Jul 10 14:05:58 ndm: Netfilter::Ip6::Table: "filter": GigabitEthernet0/Vlan3 removed 1 rule. 
[I] Jul 10 14:05:58 ndm: Network::Interface::EthernetIp: "WifiMaster0/AccessPoint1": peer isolation disabled. 
[C] Jul 10 14:05:58 ndm: Network::Interface::Mtk::WifiDriverIo: system failed [0xcffd0a10], wireless request 0x8be2: invalid argument. 
[I] Jul 10 14:05:58 ndm: Netfilter::Table: "mangle": Bridge1 removed 1 rule. 
[I] Jul 10 14:05:58 ndm: Netfilter::Ip6::Table: "filter": Bridge1 removed 1 rule. 
[C] Jul 10 14:05:58 ndm: Dhcp::Client: system failed [0xcffd06ac], unaccounted state 'undefined' for interface. 
[E] Jul 10 14:05:58 ndhcpc: Bridge1: socket error occurred. 
[I] Jul 10 14:05:58 ndhcpc: Bridge1: sending RELEASE for 192.168.15.51 to 192.168.15.101. ****** Сегмент Smart
[I] Jul 10 14:05:58 ndhcpc: Bridge1: NDM DHCP client stopped (exit status 0). 
[I] Jul 10 14:05:58 ndm: Network::Interface::Base: "Bridge0": "dhcp-client" changed "ipv4" layer state "running" to "pending". 
[I] Jul 10 14:05:58 ndhcpc: Bridge0: sending RELEASE for 192.168.13.250 to 192.168.13.11. ****** Основной сегмент
[W] Jul 10 14:05:58 ndm: Dhcp::Client: DHCP server is not responding. 
[I] Jul 10 14:05:58 ndm: Network::Interface::Ip: "Bridge0": IP address is 192.168.1.3/24. 
[I] Jul 10 14:05:58 ndhcpc: Bridge0: NDM DHCP client stopped (exit status 0). 
[I] Jul 10 14:05:58 ndm: Network::Interface::Mtk::AccessPoint: "WifiMaster0/AccessPoint0": peer isolation disabled. 
[C] Jul 10 14:05:58 ndm: Network::Interface::Mtk::WifiDriverIo: system failed [0xcffd0a10], wireless request 0x8be2: invalid argument. 
[I] Jul 10 14:05:58 ndm: Network::Interface::Mtk::AccessPoint: "WifiMaster1/AccessPoint0": peer isolation disabled. 
[C] Jul 10 14:05:58 ndm: Network::Interface::Mtk::WifiDriverIo: system failed [0xcffd0a10], wireless request 0x8be2: invalid argument. 
...
[I] Jul 10 14:06:04 ndm: Network::Interface::Mtk::WifiMonitor: "WifiMaster1/WifiStation0": performing site survey (flat scan). 
[C] Jul 10 14:06:04 ndm: Network::Interface::Mtk::WifiDriverIo: system failed [0xcffd0a10], wireless request 0x8be2: invalid argument. 
[C] Jul 10 14:06:04 ndm: Core::Syslog: last message repeated 2 times.
[I] Jul 10 14:06:04 ndm: Network::Interface::Base: "WifiMaster1/WifiStation0": "ethernet" changed "link" layer state "running" to "pending". 
[I] Jul 10 14:06:04 ndm: Network::Interface::Mtk::AccessPoint: "WifiMaster0/AccessPoint1": peer isolation disabled. 
[I] Jul 10 14:06:05 mtkiappd: stopped. 
[W] Jul 10 14:06:05 ndm: Core::Server: client disconnected. 
[I] Jul 10 14:06:05 kernel: br0: port 3(apcli1.1) entered blocking state
[I] Jul 10 14:06:05 kernel: br0: port 3(apcli1.1) entered listening state
...

interface WifiMaster0
    country-code RU
    compatibility BGN+AX
    channel 3
    channel width 40-below
    power 50
    rekey-interval 86400
    beamforming explicit
    atf inbound
    vht
    downlink-mumimo
    uplink-mumimo
    downlink-ofdma
    uplink-ofdma
    spatial-reuse
    up
!
interface WifiMaster0/AccessPoint0
    rename AccessPoint
    description "Wi-Fi access point"
    mac access-list type none
    authentication wpa-psk ns3 ***
    encryption enable
    encryption wpa2
    encryption wpa3
    ip dhcp client dns-routes
    ssid KN
    wmm
    rrm
    down ************* не используется на контроллере и выключен так же тут

interface WifiMaster1
    country-code MY
    compatibility N+AC+AX
    channel 52
    channel width 160
    power 50
    rekey-interval 86400
    beamforming explicit
    atf inbound
    downlink-mumimo
    uplink-mumimo
    downlink-ofdma
    uplink-ofdma
    spatial-reuse
    whnat
    up
!
interface WifiMaster1/AccessPoint0
    rename AccessPoint_5G
    description "5GHz Wi-Fi access point"
    mac access-list type none
    authentication wpa-psk ns3 ***
    encryption enable
    encryption wpa2
    encryption wpa3
    ip dhcp client dns-routes
    ssid KN-5
    wmm
    rrm
    ft mdid KN
    ft enable
    rssi-threshold -75
    up

interface GigabitEthernet0/Vlan3
    ip dhcp client dns-routes
    up

interface Bridge1  ***** есть отедльный роутер для 2.4 в котором данный сегмент основной 
    description HomeSmart
    include Smart **** Wifi 2.4 и больше нечего
    include GigabitEthernet0/Vlan3 ***** чисто vlan ни каких LAN портов

 

 

Все работает кажется.

Link to comment
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...