Jump to content
  • 0

Skipper 4G - модем "отваливается"


Igors Micko

Question

У меня 2х Skipper 4G.

Первый приобретён у местного продавца. После установки начались отвалы LTE модема, после и спонтанные перезапуски устройства в целом. По нему поддержка keenetic.de вынесла вердикт - hardware issues.

Второй приобрёл на Amazon.de. Думал, пока буду с первым разбираться - поставлю. И таже беда - отвалы модема.

KeeneticOS 4.1.7, на 4.1.3 пробовал - тоже самое.

 

2024-07-17 00:00:28 192.168.1.1     User.Info       Jul 17 00:00:26 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+CGPADDR=1" (expect "CGPADDR:").
2024-07-17 00:00:28 192.168.1.1     User.Info       Jul 17 00:00:26 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 --> "+CGPADDR: 1,"90.130.115.74"" (got it).
2024-07-17 00:00:28 192.168.1.1     User.Info       Jul 17 00:00:26 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 --- (expect "OK").
2024-07-17 00:00:28 192.168.1.1     User.Info       Jul 17 00:00:26 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 --> "OK" (got it).
2024-07-17 00:00:28 192.168.1.1     User.Info       Jul 17 00:00:26 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+QTEMP" (expect "QTEMP:").
2024-07-17 00:00:28 192.168.1.1     User.Warning    Jul 17 00:00:27 Keenetic-5775 ndm: PingCheck::Profile: "default": interface "UsbLte0" address 90.130.115.74: failure count 1/5.
2024-07-17 00:00:31 192.168.1.1     User.Info       Jul 17 00:00:29 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 timedout.
2024-07-17 00:00:31 192.168.1.1     User.Info       Jul 17 00:00:29 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+CPIN?" (expect "CPIN|CME ERROR").
2024-07-17 00:00:31 192.168.1.1     User.Info       Jul 17 00:00:29 Keenetic-5775 ndm: Network::Interface::Base: "UsbLte0": "usblte" changed "link" layer state "running" to "connecting".
2024-07-17 00:00:31 192.168.1.1     User.Info       Jul 17 00:00:29 Keenetic-5775 ndm: UsbLte::Connection: "UsbLte0": connection lost.
2024-07-17 00:00:34 192.168.1.1     User.Info       Jul 17 00:00:32 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 timedout.
2024-07-17 00:00:34 192.168.1.1     User.Info       Jul 17 00:00:32 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+CSQ" (expect "CSQ").
2024-07-17 00:00:36 192.168.1.1     Kernel.Info     Jul 17 00:00:34 Keenetic-5775 kernel: usb 1-1: USB disconnect, device number 8
2024-07-17 00:00:36 192.168.1.1     Kernel.Info     Jul 17 00:00:34 Keenetic-5775 kernel: cdc_ether 1-1:1.0 usb0: unregister 'cdc_ether' usb-xhci-mtk-1, CDC Ethernet Device
2024-07-17 00:00:37 192.168.1.1     User.Info       Jul 17 00:00:35 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 timedout.
2024-07-17 00:00:37 192.168.1.1     User.Info       Jul 17 00:00:35 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+CPIN?" (expect "CPIN|CME ERROR").
2024-07-17 00:00:37 192.168.1.1     User.Error      Jul 17 00:00:35 Keenetic-5775 ndm: Io::Serial: unable to write data: no such device.
2024-07-17 00:00:37 192.168.1.1     User.Info       Jul 17 00:00:35 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 disconnected.
2024-07-17 00:00:37 192.168.1.1     User.Info       Jul 17 00:00:35 Keenetic-5775 ndm: Mobile::TtyDevice: "UsbLte0": tty1 <-- "AT+CFUN=0" (expect "OK").
2024-07-17 00:00:37 192.168.1.1     User.Error      Jul 17 00:00:35 Keenetic-5775 ndm: Io::Serial: unable to write data: no such device.

 

В приложении self-test и логи отвалов по второму Skipper 4G.

Может кто сталкивался с похожим, есть  какие идеи по настройкам.

 

Заранее спасибо.

self-test_KN-2910_stable_4.01.C.7.0-1_router_2024-07-16T20-24-29.577Z.txt syslog-2024-07-17-till8.log

Edited by Igors Micko
Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Здравствуйте. Были похожие ситуации. Отключал пингчек на роутере кинетик и на usb модеме поменял с авто выбор сети на 4G/3G и все заработало стабильно. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...