I’m using a Keenetic router with a dual-bay USB enclosure (JMicron JMS561 controller) configured in RAID 1 mode with two WD Blue SA510 SATA SSDs. The enclosure is externally powered and connected via the USB 3.0 port on the router.
I’m trying to find out if there’s a way to monitor the SMART status of the connected drives (e.g., temperature, health, wear level, errors) directly through the Keenetic web interface, CLI, or any supported package or plugin.
Specifically:
• Does KeeneticOS expose SMART data for USB-connected drives?
• Is there any integration with tools like smartctl, hdparm, or WebDAV/SMB-level reporting?
• Would it work differently for single-disk vs RAID modes?
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
weldos
Hi everyone,
I’m using a Keenetic router with a dual-bay USB enclosure (JMicron JMS561 controller) configured in RAID 1 mode with two WD Blue SA510 SATA SSDs. The enclosure is externally powered and connected via the USB 3.0 port on the router.
I’m trying to find out if there’s a way to monitor the SMART status of the connected drives (e.g., temperature, health, wear level, errors) directly through the Keenetic web interface, CLI, or any supported package or plugin.
Specifically:
• Does KeeneticOS expose SMART data for USB-connected drives?
• Is there any integration with tools like smartctl, hdparm, or WebDAV/SMB-level reporting?
• Would it work differently for single-disk vs RAID modes?
Thanks in advance!
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.