i configured this as shown. Now My home clients get addresses from 2a01:XXXX:XXXX:3::/64 and i can ping router address 2a01:XXXX:XXXX::3. But the Gateway address 2a01:XXXX:XXXX::1 is not accessible.
So is the ipv6 Internet.
ip -6 nei show dev eth3 shows gateway as REACHABLE, but no icmp6 echo replies are received from it.
What i see - there are different MAC addresses of IPv4 and IPv6 gateways. But it looks normal.
For the Keenetic giga kn-1012 shouldn't there be any specific policy to allow IPv6 at least run between router and gateway?
I'm fighting with provider for almost a month.
Router has Entware installed and running. So i can check the interfaces, MACs, neighbors. Provider recommends connecting my laptop directly to check, but what the heck for? Router is working fine.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
alexse
Provider gives IPv6 config with the following parameters:
IPv6 address 2a01:XXXX:XXXX::3
IPv6 prefix 2a01:XXXX:XXXX:3::/64
IPv6 gateway 2a01:XXXX:XXXX::1
i configured this as shown. Now My home clients get addresses from 2a01:XXXX:XXXX:3::/64 and i can ping router address 2a01:XXXX:XXXX::3. But the Gateway address 2a01:XXXX:XXXX::1 is not accessible.
So is the ipv6 Internet.
ip -6 nei show dev eth3 shows gateway as REACHABLE, but no icmp6 echo replies are received from it.
What i see - there are different MAC addresses of IPv4 and IPv6 gateways. But it looks normal.
For the Keenetic giga kn-1012 shouldn't there be any specific policy to allow IPv6 at least run between router and gateway?
I'm fighting with provider for almost a month.
Router has Entware installed and running. So i can check the interfaces, MACs, neighbors. Provider recommends connecting my laptop directly to check, but what the heck for? Router is working fine.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.