Entware Scripts for Keenetic router

[matthew_eli]

Hello guys,

I wrote 3 scripts to be used with Keenetic router with Entware installed and set. I tested them with my KN-1812 and all seems to work; I'd be glad to know your feedback and suggestions.

Keenetic Firewall:
https://github.com/mattheweli/keenetic-firewall

Keenetic Pingtool:
https://github.com/mattheweli/keenetic-pingtool

Keenetic vnstat:
https://github.com/mattheweli/keenetic-vnstat

I'm available for any questions you may have

Edited January 6 by matthew_eli

[matthew_eli]

This is how they look like (latest version, not yet public):

If you want to discuss more:

https://t.me/+V0I63qd9VSs5OTNk
 

[keen_parish27]

Thank you very much for your work. I'm sure the community will appreciate your efforts! I certainly appreciate it.

[matthew_eli]

If anyone wants to try these tools, I made a script to help you installing/managing all of them:

https://github.com/mattheweli/KeenTool/tree/main

Edited January 29 by matthew_eli

[Alex88]

On 1/29/2026 at 4:31 PM, matthew_eli said:

If anyone wants to try these tools, I made a script to help you installing/managing all of them:

https://github.com/mattheweli/KeenTool/tree/main

 

Hello,

I’m trying to install KeenTool on my Keenetic Titan using OPKG, but I’m encountering issues. Here’s what I’ve tried:

1. USB Drive Setup:

   • I’ve formatted the USB drive (both NTFS and EXT4) and mounted it correctly using the "opkg disk" command. The drive is recognized as /opt in the system.

2. OPKG Setup:

   • After enabling OPKG in the Web GUI and setting the USB drive as the disk for OPKG, I proceeded to use the commands as outlined in the instructions, such as opkg update and opkg install curl. However, I receive errors such as "no such command: update" or "Command::Base error".

   • I’ve also tried opkg chroot, but I can’t run the package manager correctly.

3. Permissions:

   • I checked the permissions on the USB drive and made sure both read and write are enabled.

4. SSH and CLI:

   • I have access via SSH and Web CLI, but OPKG doesn't seem to recognize any commands for package installation.

Despite following all steps carefully, I can’t get OPKG to update or install packages. Is there a specific step I’m missing, or should I be using a different setup (e.g., EXT4 vs NTFS)?

Thanks for your help!

[matthew_eli]

Hi @Alex88

Have you followed this guide:

https://support.keenetic.com/titan/kn-1812/en/20980-installing-the-entware-repository-on-a-usb-drive.html

?

Anyhow, if you want, we can talk in my telegram group:

https://t.me/+V0I63qd9VSs5OTNk

And maybe find a solution together