Jump to content

Как подключиться через putty?

slon2000ru
 Share

Recommended Posts

slon2000ru Member

slon2000ru

Posted
Posted

Добрый день! Подскажите пожалуйста, какую версию NDMS поставить на Giga2, что бы можно было подключаться к роутеру через путти? Обновился и теперь не могу войти :( Пробовал ставить вручную более старые версии, пишет все время при установке Unsuppoted TLS и через путти затем войти не могу :(

Link to comment
Share on other sites
ndm Honored Flooder

ndm

Posted
Posted
Добрый день! Установил архив с другого форума из параллельного проекта, нашёл через Гугл, ssh подключение заработало, очень странно
Пишите толком, что и откуда поставили, а не то выпилят бестолковую тему нафиг.
Link to comment
Share on other sites
McMCC Honored Flooder

McMCC

Posted
Posted

Все очень просто, для работы родного keenopt нужна прошивка с ядром 2.6.36, т.к. системные либы собраны с TLS, а более новые версии прошивок используют ядро 2.6.22, в котором нет поддержки TLS, по всей видимости в Entware ее тоже нет, поэтому работает. Скоро будет обновление keenopt, в котором системные либы будут без TLS, за место NPTL будут использоваться обычные треды.

Link to comment
Share on other sites
T@rkus Honored Flooder

T@rkus

Posted
Posted

Не могу подключиться через PuTTY 0.66-ru-16 по ssh на keenetic giga II v2.06(AAFS.1)B3. Установил Entware как описано здесь. Ввожу в окне логин

login as:root

root@192.168.0.1's password:

Далее ввод пароля невозможен.

May 23 13:05:29ndmkernel: usb 1-2: new high speed USB device using rt3xxx-ehci and address 2

May 23 13:05:29ndmkernel: usb 1-2: configuration #1 chosen from 1 choice

May 23 13:05:29ndmkernel: scsi0 : SCSI emulation for USB Mass Storage devices

May 23 13:05:29ndmkernel: usb-storage: device found at 2

May 23 13:05:29ndmkernel: usb-storage: waiting for device to settle before scanning

May 23 13:05:34ndmkernel: scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Write Protect is off

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Write Protect is off

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

May 23 13:05:34ndmkernel: /dev/scsi/host0/bus0/target0/lun0: p1

May 23 13:05:34ndmkernel: sd 0:0:0:0: [sda] Attached SCSI removable disk

May 23 13:05:34ndmkernel: sd 0:0:0:0: Attached scsi generic sg0 type 0

May 23 13:05:34ndmkernel: usb-storage: device scan complete

May 23 13:05:34ndmFileSystem::Ext: "/dev/sda" has an unknown partition type, ignored.

May 23 13:05:34ndmFileSystem::Ext: ext3 "94fb8da4-4d2d-afb2-1132-9e094c824371:" filesystem initialized.

May 23 13:05:34ndmkernel: kjournald starting. Commit interval 5 seconds

May 23 13:05:34ndmkernel: EXT3 FS on sda1, internal journal

May 23 13:05:34ndmkernel: EXT3-fs: mounted filesystem with ordered data mode.

May 23 13:06:12ndmCore::Ndss: HTTP error: 502 (Bad Gateway).

May 23 13:06:12ndmXml::Document: invalid closing tag name.

May 23 13:06:19pptp[775]Echo Reply received.

May 23 13:06:37ndmOpkg::Manager: disk is set to: 94fb8da4-4d2d-afb2-1132-9e094c824371:

May 23 13:06:37ndmOpkg::Manager: init script reset to default: /opt/etc/initrc.

May 23 13:06:37ndmOpkg::Manager: /tmp/mnt/keendev-dsl/ mounted to /tmp/mnt/keendev-dsl/.

May 23 13:06:37ndmOpkg::Manager: /tmp/mnt/keendev-dsl/ mounted to /opt/.

May 23 13:06:37npkginflating "installer-keenle.tar.gz".

May 23 13:06:37ndmCore::ConfigurationSaver: saving configuration...

May 23 13:06:52ndmOpkg::Manager: /tmp/mnt/keendev-dsl/ initialized.

May 23 13:06:52ndmCore::ConfigurationSaver: configuration saved.

May 23 13:06:52ndmOpkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/.

May 23 13:06:520Info: Раздел пригоден для установки.

May 23 13:06:520[1/5] Начало развёртывания системы Entware-Keenetic...

May 23 13:06:520Info: Создание папок...

May 23 13:06:520[2/5] Загрузка и установка базовых пакетов...

May 23 13:06:53ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... ackages.gz.

May 23 13:06:53ndmOpkg::Manager: /opt/etc/init.d/doinstall: Updated list of available packages in /opt/var/opkg-lists/keenle.

May 23 13:06:53ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing opt-ndmsv2 (1.0-1) to root...

May 23 13:06:53ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:54ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libc (1.0.13-3) to root...

May 23 13:06:54ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:55ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libgcc (5.3.0-3) to root...

May 23 13:06:55ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:55ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libssp (5.3.0-3) to root...

May 23 13:06:55ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:56ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libstdcpp (5.3.0-3) to root...

May 23 13:06:56ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:57ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libpthread (1.0.13-3) to root...

May 23 13:06:57ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing librt (1.0.13-3) to root...

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing ldconfig (1.0.13-3) to root...

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing findutils (4.6.0-1) to root...

May 23 13:06:58ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:06:59ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing terminfo (6.0-1) to root...

May 23 13:06:59ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:07:06ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing dropbear (2015.71-3) to root...

May 23 13:07:06ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:07:06ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing ndmq (1.0.2-1) to root...

May 23 13:07:06ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Installing libndm (1.0.22-1) to root...

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Downloading http://pkg.entware-keenetic.ru/binaries ... keenle.ipk.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Updating /opt/etc/ld.so.cache... done.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libgcc.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libc.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libssp.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring terminfo.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring ldconfig.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libpthread.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring librt.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libndm.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring ndmq.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring dropbear.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring libstdcpp.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring findutils.

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Configuring opt-ndmsv2.

May 23 13:07:07rootInfo: Установка пакетов прошла успешно! Продолжаем...

May 23 13:07:07root[3/5] Настройка сценария запуска для прошивки NDMS...

May 23 13:07:07ndmCore::Server: started Session 127.0.0.1:45945.

May 23 13:07:07ndmOpkg::Manager: configured init script: "/opt/etc/init.d/rc.unslung".

May 23 13:07:07ndmCore::Session: client disconnected.

May 23 13:07:07ndmCore::Server: started Session 127.0.0.1:45946.

May 23 13:07:07ndmCore::ConfigurationSaver: saving configuration...

May 23 13:07:07ndmCore::Session: client disconnected.

May 23 13:07:07root[4/5] Генерация SSH-ключей...

May 23 13:07:07ndmOpkg::Manager: /opt/etc/init.d/doinstall: Generating key, this may take a while...

May 23 13:07:12ndmCore::ConfigurationSaver: configuration saved.

May 23 13:07:19pptp[775]Echo Reply received.

May 23 13:07:22rootInfo: ключ rsa создан

May 23 13:07:22ndmOpkg::Manager: /opt/etc/init.d/doinstall: .......Generating key, this may take a while...

May 23 13:07:24rootInfo: ключ ecdsa создан

May 23 13:07:24root[5/5] Установка Entware-Keenetic завершена! Запуск dropbear...

May 23 13:07:24dropbear[1180]Running in background

May 23 13:07:24rootГотово!!!

May 23 13:07:24rootМожно открыть SSH-сессию для соединения с устройством (логин:пароль -> root:zyxel).

May 23 13:07:24ndmOpkg::Manager: /opt/etc/init.d/doinstall:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...