Lordmaster Posted September 13, 2017 Share Posted September 13, 2017 (edited) 24 минуты назад, asphy сказал: Друзья, подскажите, после установки по данной инструкции аппарат Omni II способен вывозить OwnCloud? Один раз пробовал его поставить примерно с год назад, так он был неописуемо медлительным Я бы не рисковал. Ставил на Keenetic II, так он с трудом вытягивал. При обращении к OwnCloud оперативка съедалась моментально и роутер на пару минут зависал намертво. Мое личное мнение, что OwnCloud на кинетиках только для Гига и Ультра. Остальные слабоваты. Повторюсь, это мое личное мнение. Edited September 13, 2017 by Lordmaster 1 1 Quote Link to comment Share on other sites More sharing options...
Le ecureuil Posted September 13, 2017 Share Posted September 13, 2017 Попытаюсь настроить, может дам какие советы по тюнингу, чтобы хоть еле-еле, но устойчиво работало. Quote Link to comment Share on other sites More sharing options...
TheBB Posted September 14, 2017 Author Share Posted September 14, 2017 В 13.09.2017 в 08:07, asphy сказал: Друзья, подскажите, после установки по данной инструкции аппарат Omni II способен вывозить OwnCloud? включить swap и-и-и... если "повезёт" Quote Link to comment Share on other sites More sharing options...
mrlis Posted December 2, 2017 Share Posted December 2, 2017 В 16.06.2017 в 22:41, TheBB сказал: lighttpd+php7+sqlite+ssl=owncloud-10.0.2 ставим пакеты opkg install ca-certificates curl lighttpd lighttpd-mod-cgi lighttpd-mod-fastcgi openssl-util \ php7-cli php7-fastcgi php7-mod-ctype php7-mod-curl php7-mod-dom php7-mod-fileinfo php7-mod-gd \ php7-mod-hash php7-mod-json php7-mod-mbstring php7-mod-pdo-sqlite php7-mod-session php7-mod-simplexml \ php7-mod-sqlite3 php7-mod-xml php7-mod-xmlreader php7-mod-xmlwriter php7-mod-zip tar забираем архив curl https://download.owncloud.org/community/owncloud-10.0.2.tar.bz2 --output oc.tar.bz2 распаковываем tar xjvf oc.tar.bz2 -C /opt/share/www/ правим php.ini Показать содержимое [PHP] zend.ze1_compatibility_mode = Off ; Language Options engine = On ;short_open_tag = Off precision = 12 y2k_compliance = On output_buffering = Off ;output_handler = zlib.output_compression = Off ;zlib.output_compression_level = -1 ;zlib.output_handler = implicit_flush = Off unserialize_callback_func = serialize_precision = 100 ;open_basedir = disable_functions = disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ;ignore_user_abort = On ;realpath_cache_size = 16k ;realpath_cache_ttl = 120 ; Miscellaneous expose_php = On ; Resource Limits max_execution_time = 30 ; Maximum execution time of each script, in seconds. max_input_time = 60 ; Maximum amount of time each script may spend parsing request data. ;max_input_nesting_level = 64 memory_limit = 32M ; Error handling and logging ; Error Level Constants: ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; E_DEPRECATED - warn about code that will not work in future versions ; of PHP ; E_USER_DEPRECATED - user-generated deprecation warnings ; ; Common Values: ; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) ; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) ; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) ; Default Value: E_ALL & ~E_NOTICE error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT display_errors = On display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On ;report_zend_debug = 0 track_errors = Off ;html_errors = Off ;docref_root = "/phpmanual/" ;docref_ext = .html ;error_prepend_string = "<font color=#ff0000>" ;error_append_string = "</font>" ; Log errors to specified file. ;error_log = /opt/var/log/php_errors.log ; Log errors to syslog. ;error_log = syslog ; Data Handling ;arg_separator.output = "&" ;arg_separator.input = ";&" variables_order = "EGPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = On auto_globals_jit = On post_max_size = 512M ;magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" ;default_charset = "iso-8859-1" ;always_populate_raw_post_data = On ; Paths and Directories ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" doc_root = "/opt/share/www" user_dir = extension_dir = "/opt/lib/php" enable_dl = On ;cgi.force_redirect = 1 ;cgi.nph = 1 ;cgi.redirect_status_env = ; cgi.fix_pathinfo=1 ;fastcgi.impersonate = 1; ;fastcgi.logging = 0 ;cgi.rfc2616_headers = 0 ; File Uploads file_uploads = On upload_tmp_dir = "/opt/tmp" upload_max_filesize = 512M max_file_uploads = 20 ; Fopen wrappers allow_url_fopen = On allow_url_include = Off ;from="john@doe.com" ;user_agent="PHP" default_socket_timeout = 60 ;auto_detect_line_endings = Off правим lighttpd.conf Показать содержимое server.document-root = "/opt/share/www" server.upload-dirs = ( "/tmp" ) server.errorlog = "/opt/var/log/lighttpd/error.log" server.pid-file = "/opt/var/run/lighttpd.pid" #server.username = "http" #server.groupname = "www-data" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ### Options that are useful but not always necessary: #server.chroot = "/" server.port = 81 #server.bind = "localhost" #server.tag = "lighttpd" #server.errorlog-use-syslog = "enable" server.network-backend = "writev" ### Use IPv6 if available #include_shell "/opt/share/lighttpd/use-ipv6.pl" #dir-listing.encoding = "utf-8" #server.dir-listing = "enable" include "/opt/etc/lighttpd/mime.conf" include "/opt/etc/lighttpd/conf.d/*.conf" $HTTP["url"] =~ "^/owncloud/data/" { url.access-deny = ("") } $HTTP["url"] =~ "^/owncloud($|/)" { dir-listing.activate = "disable" } #ssl $SERVER["socket"] == ":443" { ssl.engine = "enable" ssl.pemfile = "/opt/etc/lighttpd/certs/lighttpd.pem" # enforce strong cypher ssl.use-sslv2 = "disable" ssl.cipher-list = "TLSv1+HIGH !SSLv2 RC4+MEDIUM !aNULL !eNULL !3DES @STRENGTH" } правим 30-fastcgi.conf Показать содержимое ####################################################################### ## ## FastCGI Module ## --------------- ## ## See http://redmine.lighttpd.net/projects/lighttpd/wiki/Docs_ModFastCGI ## server.modules += ( "mod_fastcgi" ) ## ## PHP Example ## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini. ## ## The number of php processes you will get can be easily calculated: ## ## num-procs = max-procs * ( 1 + PHP_FCGI_CHILDREN ) ## ## for the php-num-procs example it means you will get 17*5 = 85 php ## processes. you always should need this high number for your very ## busy sites. And if you have a lot of RAM. :) ## fastcgi.server = ( ".php" => ( "php-local" => ( "socket" => "/opt/tmp/php-fastcgi-1.socket", "bin-path" => "/opt/bin/php-fcgi", "max-procs" => 1, "broken-scriptfilename" => "enable", ) ), # ( "php-tcp" => # ( # "host" => "127.0.0.1", # "port" => 9999, # "check-local" => "disable", # "broken-scriptfilename" => "enable", # ) # ), # # ( "php-num-procs" => # ( # "socket" => socket_dir + "/php-fastcgi-2.socket", # "bin-path" => server_root + "/cgi-bin/php5", # "bin-environment" => ( # "PHP_FCGI_CHILDREN" => "16", # "PHP_FCGI_MAX_REQUESTS" => "10000", # ), # "max-procs" => 5, # "broken-scriptfilename" => "enable", # ) # ), ) ## ## Ruby on Rails Example ## ## Normally you only run one Rails application on one vhost. ## #$HTTP["host"] == "rails1.example.com" { # server.document-root = server_root + "/rails/someapp/public" # server.error-handler-404 = "/dispatch.fcgi" # fastcgi.server = ( ".fcgi" => # ("someapp" => # ( "socket" => socket_dir + "/someapp-fcgi.socket", # "bin-path" => server_root + "/rails/someapp/public/dispatch.fcgi", # "bin-environment" => ( # "RAILS_ENV" => "production", # "TMP" => home_dir + "/rails/someapp", # ), # ) # ) # ) #} ## ## Another example with multiple rails applications on one vhost. ## ## http://blog.lighttpd.net/articles/2005/11/23/lighttpd-1-4-8-and-multiple-rails-apps ## #$HTTP["host"] == "rails2.example.com" { # $HTTP["url"] =~ "^/someapp1" { # server.document-root = server_root + "/rails/someapp1/public" # server.error-handler-404 = "/dispatch.fcgi" # fastcgi.server = ( ".fcgi" => # ("someapp1" => # ( "socket" => socket_dir + "/someapp1-fcgi.socket", # "bin-path" => server_root + "/rails/someapp1/public/dispatch.fcgi", # "bin-environment" => ( # "RAILS_ENV" => "production", # "TMP" => home_dir + "/rails/someapp1", # ), # "strip-request-uri" => "/someapp1/" # ) # ) # ) # } # # $HTTP["url"] =~ "^/someapp2" { # server.document-root = server_root + "/rails/someapp2/public" # server.error-handler-404 = "/dispatch.fcgi" # fastcgi.server = ( ".fcgi" => # ("someapp2" => # ( "socket" => socket_dir + "/someapp2-fcgi.socket", # "bin-path" => server_root + "/rails/someapp2/public/dispatch.fcgi", # "bin-environment" => ( # "RAILS_ENV" => "production", # "TMP" => home_dir + "/rails/someapp2", # ), # "strip-request-uri" => "/someapp2/" # ) # ) # ) # } #} ## chrooted webserver + external PHP ## ## $ spawn-fcgi -f /usr/bin/php-cgi -p 2000 -a 127.0.0.1 -C 8 ## ## webserver chrooted to /srv/www/ ## php running outside the chroot # #fastcgi.server = ( # ".php" => (( # "host" => "127.0.0.1", # "port" => "2000", # "docroot" => "/srv/www/servers/www.example.org/htdocs/" # ))) # #server.chroot = "/srv/www" #server.document-root = "/servers/wwww.example.org/htdocs/" # ## ####################################################################### создаём папку mkdir -p ../etc/lighttpd/certs переходим в неё, создаём pem-файл и задаём ему права cd /opt/etc/lighttpd/certs/ openssl req -new -x509 -keyout lighttpd.pem -out lighttpd.pem -days 1095 -nodes chmod 400 lighttpd.pem проверяем корректность конфига lighttpd -t -f /opt/etc/lighttpd/lighttpd.conf запускаем сервер (или рестартим запущенный) /opt/etc/init.d/S80lighttpd start идём по адресу (своего устройства) и вводим данные (свои) и жмём "Завершить установку" на выходе имеем "закручиваем гайки" и настраиваем под себя... Доброго дня! Сделал всё по этой инструкции, но при запуске lighttpd возникает это: ~ # /opt/etc/init.d/S80lighttpd start Starting lighttpd... Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault failed. Кинетик Ultra ndms v2.06(AAGJ.0)C3 Quote Link to comment Share on other sites More sharing options...
Le ecureuil Posted December 2, 2017 Share Posted December 2, 2017 2 часа назад, mrlis сказал: Доброго дня! Сделал всё по этой инструкции, но при запуске lighttpd возникает это: ~ # /opt/etc/init.d/S80lighttpd start Starting lighttpd... Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault Segmentation fault failed. Кинетик Ultra ndms v2.06(AAGJ.0)C3 Это дикое старье мамонта, перейдите на 2.09 / 2.10 / 2.11. Quote Link to comment Share on other sites More sharing options...
TheBB Posted December 2, 2017 Author Share Posted December 2, 2017 Прошел все пункты по инструкции - всё запустилось. Проверяйте настройки lighttpd. Quote Link to comment Share on other sites More sharing options...
mrlis Posted December 3, 2017 Share Posted December 3, 2017 (edited) В 02.12.2017 в 17:15, Le ecureuil сказал: Это дикое старье мамонта, перейдите на 2.09 / 2.10 / 2.11. Перешёл на 2.11 В 02.12.2017 в 18:39, TheBB сказал: Прошел все пункты по инструкции - всё запустилось. Проверяйте настройки lighttpd. Всё заработало. проблема была в запущенном nginx Осталось найти как подключить жесткий диск готово) Edited December 4, 2017 by mrlis Quote Link to comment Share on other sites More sharing options...
vvv506 Posted December 6, 2017 Share Posted December 6, 2017 В 03.12.2017 в 17:05, mrlis сказал: Осталось найти как подключить жесткий диск готово) Поделитесь... это про второй по usb? Quote Link to comment Share on other sites More sharing options...
mrlis Posted December 6, 2017 Share Posted December 6, 2017 4 часа назад, vvv506 сказал: Поделитесь... это про второй по usb? Собственно да) Чтобы хранилище было не на флешке а на отдельном харде подключенном к второму юсби порту. Решение нашёл в первом посте) Quote Link to comment Share on other sites More sharing options...
vvv506 Posted December 7, 2017 Share Posted December 7, 2017 Это немножко не то. Надо как-то подцепить второй диск как внешнее хранилище. Own стоит на 500 Гиг, что более чем достаточно, а второй качает торренты и он 2 Тв... совместить бы для удобства доступа из вне. Quote Link to comment Share on other sites More sharing options...
Nuke Posted December 23, 2017 Share Posted December 23, 2017 (edited) mysql_install_db --datadir=/media/Main/opt/var --basedir=/media/Main/opt --force не работает, команда не найдена. php7-mod-mysql в entware нету http://pkg.entware.net/binaries/mipsel/Packages.html только php7-mod-mysqli - пакет установил, но команды mysql_install_db все равно не понимает. Edited December 23, 2017 by Nuke Quote Link to comment Share on other sites More sharing options...
TheBB Posted December 23, 2017 Author Share Posted December 23, 2017 28 минут назад, Nuke сказал: не работает, команда не найдена. если меняете пути, должны разбираться в синтаксисе (опциях). по дефолту оно работает Скрытый текст ~ # mysql_install_db --datadir=/opt/var --basedir=/opt --force Installing MariaDB/MySQL system tables in '/opt/var' ... 171223 17:54:45 [Warning] 'THREAD_CONCURRENCY' is deprecated and will be removed in a future release. 171223 17:54:45 [Note] /opt/bin/mysqld (mysqld 5.5.58-MariaDB) starting as process 12274 ... OK Filling help tables... 171223 17:54:46 [Warning] 'THREAD_CONCURRENCY' is deprecated and will be removed in a future release. 171223 17:54:46 [Note] /opt/bin/mysqld (mysqld 5.5.58-MariaDB) starting as process 12282 ... OK To start mysqld at boot time you have to copy support-files/mysql.server to the right place for your system PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/opt/bin/mysqladmin' -u root password 'new-password' '/opt/bin/mysqladmin' -u root -h Keenetic_Giga password 'new-password' Alternatively you can run: '/opt/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://mariadb.com/kb or the MySQL manual for more instructions. You can start the MariaDB daemon with: cd '/opt' ; /opt/bin/mysqld_safe --datadir='/opt/var' You can test the MariaDB daemon with mysql-test-run.pl cd '/opt/mysql-test' ; perl mysql-test-run.pl Please report any problems at http://mariadb.org/jira The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Consider joining MariaDB's strong and vibrant community: https://mariadb.org/get-involved/ ~ # Quote Link to comment Share on other sites More sharing options...
Nuke Posted December 23, 2017 Share Posted December 23, 2017 Так тут вероятно не в путях дело, команды просто нету такой: -sh: mysqli_install_db: not found Вы сами какой в итоге пакет ставили, если в entware его сейчас нет? php7-mod-mysqli ? Quote Link to comment Share on other sites More sharing options...
TheBB Posted December 23, 2017 Author Share Posted December 23, 2017 (edited) "машку" (mariadb). php-mod-mysqli - php-модуль для работы с БД. как раз таки в путях (не правильно) ~ # mysql_install_db --datadir=/media/Main/opt/var --basedir=/media/Main/opt --force FATAL ERROR: Could not find my_print_defaults The following directories were searched: /media/Main/opt/bin /media/Main/opt/extra или так ~ # mysql_install_db --datadir=/media/Main/opt/var --basedir=/opt --force mkdir: can't create directory '/media/': Read-only file system Fatal error Can't create database directory '/media/Main/opt/var' корректная отработка запуска, в предыдущем посте и ещё... оно было актуально для mysql, для mariadb можно обойтись запуском `mysql_install_db` Скрытый текст ~ # mysql_install_db Installing MariaDB/MySQL system tables in '/opt/var/mysql/' ... 171223 18:24:41 [Warning] 'THREAD_CONCURRENCY' is deprecated and will be removed in a future release. 171223 18:24:41 [Note] /opt/bin/mysqld (mysqld 5.5.58-MariaDB) starting as process 12661 ... OK Filling help tables... 171223 18:24:43 [Warning] 'THREAD_CONCURRENCY' is deprecated and will be removed in a future release. 171223 18:24:43 [Note] /opt/bin/mysqld (mysqld 5.5.58-MariaDB) starting as process 12669 ... OK To start mysqld at boot time you have to copy support-files/mysql.server to the right place for your system PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/opt/bin/mysqladmin' -u root password 'new-password' '/opt/bin/mysqladmin' -u root -h Keenetic_Giga password 'new-password' Alternatively you can run: '/opt/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://mariadb.com/kb or the MySQL manual for more instructions. You can start the MariaDB daemon with: cd '/opt' ; /opt/bin/mysqld_safe --datadir='/opt/var/mysql/' You can test the MariaDB daemon with mysql-test-run.pl cd '/opt/mysql-test' ; perl mysql-test-run.pl Please report any problems at http://mariadb.org/jira The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Consider joining MariaDB's strong and vibrant community: https://mariadb.org/get-involved/ ~ # Edited December 23, 2017 by TheBB дополнил 1 Quote Link to comment Share on other sites More sharing options...
Nuke Posted December 23, 2017 Share Posted December 23, 2017 (edited) Спасибо, всё взлетело по вашему гайду с lighttpd. Даже проще все оказалось. Есть или способ разрешить доступ к облаку с любого адреса? Пользуюсь устройствами, которые так или иначе имеют динамический ip , все вносить в конфиг нереально. В чем разница по включению https на lighttpd ? Тупо внести указанные в гайде строчки в lighttpd.conf не помогло, сервак даже запускаться с ними отказывается. Вероятно, метод другой. Edited December 23, 2017 by Nuke Quote Link to comment Share on other sites More sharing options...
TheBB Posted December 23, 2017 Author Share Posted December 23, 2017 46 минут назад, Nuke сказал: Есть или способ разрешить доступ к облаку с любого адреса? keendns не подходит? 46 минут назад, Nuke сказал: В чем разница по включению https на lighttpd ? нужно ставить и настраивать соотв. модули лайти (lighttpd) Quote Link to comment Share on other sites More sharing options...
Nuke Posted December 23, 2017 Share Posted December 23, 2017 (edited) 3 часа назад, TheBB сказал: keendns не подходит? 4 часа назад, Nuke сказал: я имел ввиду это, при открытии сайта извне: Скрытый текст Edited December 23, 2017 by Nuke Quote Link to comment Share on other sites More sharing options...
Nuke Posted December 26, 2017 Share Posted December 26, 2017 Есть ли совет по вопросу выше? Это уже общая настройка, не корнкретно мой случай. По дефолу owncloud запрещает на себя заходить не внесенным в список адресам. Как разрешить все? Quote Link to comment Share on other sites More sharing options...
Lordmaster Posted December 26, 2017 Share Posted December 26, 2017 (edited) 2 часа назад, Nuke сказал: Есть ли совет по вопросу выше? Это уже общая настройка, не корнкретно мой случай. По дефолу owncloud запрещает на себя заходить не внесенным в список адресам. Как разрешить все? Вы уверены в этом? В данном сообщении сказано что вы заходите на owncloud по адресу, который он не знает. Просто внесите в /opt/share/www/owncloud/config/config.php (или там где он у вас установлен) свои адреса и все. Пример из моего конфига (ip замените на свое): Скрытый текст 'trusted_domains' => array ( 0 => 'ip1:86', 1 => 'ip2:486', 2 => 'ip3', 3 => 'xxx.yyy.keenetic.pro', Edited December 26, 2017 by Lordmaster 1 Quote Link to comment Share on other sites More sharing options...
SimPS Posted January 11, 2018 Share Posted January 11, 2018 (edited) все сделал, а в конце вот такая фигня Доступ запрещён CSRF check failed Как заново перейти на первую страничку настроек, где вбиваешь логин и пароль админа и название базы данных ?? Удалить файл config.php Edited January 11, 2018 by SimPS Quote Link to comment Share on other sites More sharing options...
Lordmaster Posted January 12, 2018 Share Posted January 12, 2018 9 часов назад, SimPS сказал: все сделал, а в конце вот такая фигня Доступ запрещён CSRF check failed Как заново перейти на первую страничку настроек, где вбиваешь логин и пароль админа и название базы данных ?? Удалить файл config.php Если не изменяет память, то такое окно убирается, когда в настройках mysql выставить binlog_format=mixed. Quote Link to comment Share on other sites More sharing options...
SimPS Posted January 12, 2018 Share Posted January 12, 2018 (edited) В 12.01.2018 в 09:09, Lordmaster сказал: Если не изменяет память, то такое окно убирается, когда в настройках mysql выставить binlog_format=mixed. не помогло (( теперь такая ошибка Доступ запрещён CSRF check failed Edited January 13, 2018 by SimPS Quote Link to comment Share on other sites More sharing options...
пользователь1 Posted February 2, 2018 Share Posted February 2, 2018 В 12.01.2018 в 20:09, SimPS сказал: не помогло (( теперь такая ошибка Доступ запрещён CSRF check failed вот тоже вчера решил заняться и уперся в эту ошибку... ставил по рецепту 10 версии Quote Link to comment Share on other sites More sharing options...
SimPS Posted February 4, 2018 Share Posted February 4, 2018 вот тоже вчера решил заняться и уперся в эту ошибку... ставил по рецепту 10 версииМожет кто из умельцев подскажет? Sent from my Redmi Note 4X using Tapatalk Quote Link to comment Share on other sites More sharing options...
TheBB Posted February 4, 2018 Author Share Posted February 4, 2018 Скрытый текст пакеты opkg install bzip2 lighttpd-mod-access lighttpd-mod-fastcgi php7-cgi php7-mod-ctype \ php7-mod-curl php7-mod-dom php7-mod-fileinfo php7-mod-gd php7-mod-hash php7-mod-iconv \ php7-mod-json php7-mod-mbstring php7-mod-pdo-sqlite php7-mod-session php7-mod-simplexml \ php7-mod-sqlite3 php7-mod-xml php7-mod-xmlreader php7-mod-xmlwriter php7-mod-zip архив wget -O - http://download.owncloud.org/community/owncloud-10.0.4.tar.bz2 | \ bzip2 -cd | tar -xvC /opt/share/www/ конфиг сервера server.port = 81 fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/tmp/php-fcgi.sock", "bin-path" => "/opt/bin/php-fcgi", "max-procs" => 1, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "1000" ) ) ) ) $HTTP["url"] =~ "^/owncloud/data/" { url.access-deny = ("") } $HTTP["url"] =~ "^/owncloud($|/)" { dir-listing.activate = "disable" } конфиг пыха upload_max_filesize = 100M post_max_size = 100M memory_limit = 32M старт /opt/etc/init.d/S80lighttpd start Quote Link to comment Share on other sites More sharing options...
пользователь1 Posted February 4, 2018 Share Posted February 4, 2018 очень прошу понять и простить, но... как правильно удалить предыдущую версию? Quote Link to comment Share on other sites More sharing options...
SimPS Posted February 4, 2018 Share Posted February 4, 2018 очень прошу понять и простить, но... как правильно удалить предыдущую версию?Да можно форматнуть флешку и с нуля все поставитьSent from my Redmi Note 4X using Tapatalk Quote Link to comment Share on other sites More sharing options...
пользователь1 Posted February 4, 2018 Share Posted February 4, 2018 2 минуты назад, SimPS сказал: Да можно форматнуть флешку и с нуля все поставить Sent from my Redmi Note 4X using Tapatalk не хотелось бы, там еще кое-что установлено Quote Link to comment Share on other sites More sharing options...
TheBB Posted February 4, 2018 Author Share Posted February 4, 2018 rm -rf /opt/share/www/owncloud или где там оно установлено + если БД mariadb (mysql), "дропнуть" используемую owncloud базу Quote Link to comment Share on other sites More sharing options...
Сергей С Posted May 5, 2018 Share Posted May 5, 2018 Как не пытался, ни в entware ни в debian не могу запустить ownclod. Везде ошибки... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.