Jump to content
  • 0

USB 3.0 device supports USB Attached SCSI (UAS) Protocol


vasek00

Question

Возможно в перспективе для 4.9 на проце 7621 поддержка данного device supports USB Attached SCSI (UAS) и сможет ли он проц осилить или поднять текущие скорости USB3 для роутера.

Есть упоминания

Скрытый текст

https://bugs.openwrt.org/index.php?do=details&task_id=1637


[ 0.000000] Linux version 4.14.50 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6984-fa0275b)) #0 SMP Fri Jun 22 10:22:57 2018 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
...
[   11.153260] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   11.407918] SCSI subsystem initialized
[   11.442899] usbcore: registered new interface driver usb-storage
[   11.455482] scsi host0: uas
[   11.459086] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[   11.467505] xhci-mtk 1e1c0000.xhci: @000000000f78b190 0e9ae000 00000000 05000000 01058001
[   11.475647] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 6
[   11.484046] xhci-mtk 1e1c0000.xhci: @000000000f78b1a0 0e9ae100 00000000 05000000 01078001
[   32.575006] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[   32.582562] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[   32.588806] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[   32.598592] xhci-mtk 1e1c0000.xhci: ep deq seg = 8ea5ef00, deq ptr = aea6b010
[   33.684978] scsi host0: uas_eh_device_reset_handler FAILED to get lock err -16
[   33.692180] scsi 0:0:0:0: Device offlined - not ready after error recovery
[   33.699447] usbcore: registered new interface driver uas
[   33.705098] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
...
[  161.234025] xhci-mtk 1e1c0000.xhci: Cannot set link state.
[  161.239536] usb usb2-port1: cannot disable (err = -32)
[  161.244695] usb 2-1: USB disconnect, device number 2
[  161.249997] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  161.259783] xhci-mtk 1e1c0000.xhci: ep deq seg = 8ea5e680, deq ptr = af7fc010
[  173.723928] usb 2-1: new SuperSpeed USB device number 3 using xhci-mtk
[  173.758634] scsi host0: uas
[  173.762521] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[  173.770987] xhci-mtk 1e1c0000.xhci: @000000000f78b400 0e9ae200 00000000 05000000 01058001
[  173.779174] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 6
[  173.787585] xhci-mtk 1e1c0000.xhci: @000000000f78b410 0e9ae100 00000000 05000000 01078001
[  195.773489] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  195.781053] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[  195.787337] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  195.797126] xhci-mtk 1e1c0000.xhci: ep deq seg = 8f7fde80, deq ptr = ae9ca010
[  196.863444] scsi host0: uas_eh_device_reset_handler FAILED to get lock err -16
[  196.870659] scsi 0:0:0:0: Device offlined - not ready after error recovery
...

 

 

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Пробовали, UAS не поддерживается контроллером xHCI mt7621. Интересно было бы оценить производительность UAS, но увы.

  • Thanks 1
  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...