father_mande Posted May 29, 2019 Share Posted May 29, 2019 (edited) Hi, I just update my KN-1010 to 2.15.C.4.0-1 ... without visible problem After that I open a ssh console (ssh from opkg) and run opkg update ... O.K. then opkg upgrade ... and I failed in missing libc.so.0 (cannot open shared object file: No such file or directory) Hum! I will try by adding a LD_LIBRARY_PATH in case of problem in opkg libraries path LD_LIBRARY_PATH=/opt/lib opkg upgrade NOW : wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory if I redo test with or without LD_LIBRARY_PATH I have now always same : wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory EVEN for an update /opt # opkg update Downloading http://bin.entware.net/mipselsf-k3.4/Packages.gz wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory *** Failed to download the package list from http://bin.entware.net/mipselsf-k3.4/Packages.gz Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory *** Failed to download the package list from http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz Collected errors: * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/Packages.gz, wget returned 127. * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz, wget returned 127. for upgrade : /opt # opkg upgrade Upgrading zoneinfo-europe on root from 2018g-1 to 2019a-1... Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2019a-1_mipsel-3.4.ipk wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory Upgrading busybox on root from 1.29.2-1 to 1.30.1-2... Downloading http://bin.entware.net/mipselsf-k3.4/busybox_1.30.1-2_mipsel-3.4.ipk wget: error while loading shared libraries: ld-uClibc.so.1: cannot open shared object file: No such file or directory Upgrading libpcre on root from 8.42-1 to 8.43-1... ... ... etc. Collected errors: * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2019a-1_mipsel-3.4.ipk, wget returned 127. * opkg_install_pkg: Failed to download zoneinfo-europe. Perhaps you need to run 'opkg update'? * opkg_download: Failed to download http://bin.entware.net/mipselsf-k3.4/busybox_1.30.1-2_mipsel-3.4.ipk, wget returned 127. * opkg_install_pkg: Failed to download busybox. Perhaps you need to run 'opkg update'? ... ... etc. do you have some advice before I redo a clean install Philippe. Edited May 29, 2019 by Philippe Mande Quote Link to comment Share on other sites More sharing options...
father_mande Posted May 29, 2019 Author Share Posted May 29, 2019 Hi, in complement : content of ld.so.cache ALSO ld.so.conf is empty (don't know if it's normal) /opt # strings etc/ld.so.cache ld.so-1.7.0 glibc-ld.so.cache1.1" libz.so.1 /opt/lib/libz.so.1 libz.so /opt/lib/libz.so libuuid.so.1 /opt/lib/libuuid.so.1 libuuid.so /opt/lib/libuuid.so libutil.so.1 /opt/lib/libutil.so.1 libstdc++.so.6 /opt/lib/libstdc++.so.6 libssp.so.0 /opt/lib/libssp.so.0 libssl.so.1.0.0 /opt/lib/libssl.so.1.0.0 librt.so.1 /opt/lib/librt.so.1 libresolv.so.2 /opt/lib/libresolv.so.2 libpthread.so.0 /opt/lib/libpthread.so.0 libpcreposix.so.0 /opt/lib/libpcreposix.so.0 libpcre.so.1 /opt/lib/libpcre.so.1 libpcre.so /opt/lib/libpcre.so libpcprofile.so /opt/lib/libpcprofile.so libparted.so.2 /opt/lib/libparted.so.2 libparted.so /opt/lib/libparted.so libnss_files.so.2 /opt/lib/libnss_files.so.2 libnss_dns.so.2 /opt/lib/libnss_dns.so.2 libnsl.so.1 /opt/lib/libnsl.so.1 libndm.so /opt/lib/libndm.so libmemusage.so /opt/lib/libmemusage.so libmagic.so.1 /opt/lib/libmagic.so.1 libm.so.6 /opt/lib/libm.so.6 libgcc_s.so.1 /opt/lib/libgcc_s.so.1 libdl.so.2 /opt/lib/libdl.so.2 libcrypto.so.1.0.0 /opt/lib/libcrypto.so.1.0.0 libcrypt.so.1 /opt/lib/libcrypt.so.1 libcidn.so.1 /opt/lib/libcidn.so.1 libc.so.6 /opt/lib/libc.so.6 libblkid.so.1 /opt/lib/libblkid.so.1 libblkid.so /opt/lib/libblkid.so libanl.so.1 /opt/lib/libanl.so.1 ld.so.1 /opt/lib/ld.so.1 Philippe. Quote Link to comment Share on other sites More sharing options...
Александр Рыжов Posted May 29, 2019 Share Posted May 29, 2019 Something went wrong. Better to install Entware from scratch if possible. We don't use uClibc. Is it an attempt to upgrade from Entware-ng? Quote Link to comment Share on other sites More sharing options...
father_mande Posted May 29, 2019 Author Share Posted May 29, 2019 Hi, 5 minutes ago, Александр Рыжов said: Something went wrong. Better to install Entware from scratch if possible. We don't use uClibc. Is it an attempt to upgrade from Entware-ng? OK I will redo a fresh install (I have a full save of all my configuration and start_up scripts) BUT NO I directly start with Entware and all was running fine (I just forgot to do an update / upgrade from some times ... because all run as well before the Giga router update ) I don't have any trace of using uClibc up to now (except in the /lib provide by keenetic) Thanks for your quick response. Philippe. NB I will return result here after clean install. Quote Link to comment Share on other sites More sharing options...
Александр Рыжов Posted May 29, 2019 Share Posted May 29, 2019 As for me, I'm using two 1GB ext3 partitions on USB drive, labeled as OPT1/OPT2 and this script to jump between them. If one Entware installation has ruined, I always can pick another one from WebUI. ld.so.conf is zero length indeed, it's normal. Quote Link to comment Share on other sites More sharing options...
father_mande Posted May 29, 2019 Author Share Posted May 29, 2019 Hi, Thanks for advice and script ... I certainly use it ... Philippe. Quote Link to comment Share on other sites More sharing options...
father_mande Posted May 29, 2019 Author Share Posted May 29, 2019 Hi, F.Y.I. I do a rebuild from scratch with 2 partitions ... all run now What I do : remove volume on USB keys recreate volume (2) ... during this phase I was stooped due to some errors ? so I have also do a bad-blocks check ... and get one error (marked) create 2 volumes and format it in ext4. follow the OPKG install procedure as usual connect via ssh update, upgrade and reinstall packages (get back previous configuration (saved before) I am not sure that problem come from the bad-block but perhaps ... Thanks for your help. Philippe. NB now I will check to have 2 versions installed as suggested here before Quote Link to comment Share on other sites More sharing options...
MrShade666 Posted June 20, 2019 Share Posted June 20, 2019 Попробуй rm -f /opt/bin/wget ln -s /opt/bin/busybox /opt/bin/wget Потом обновись и переустанови wget. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.