shik Posted July 20, 2020 Posted July 20, 2020 Имеется 2 компьютера с сетевыми картами 1000Мб. Настройка сетевой карты компьютера 1: Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off Supports Wake-on: g Wake-on: g Current message level: 0x000000ff (255) Настройка сетевой карты компьютера 2 приведена на рисунке 1. Порты роутера настроены 1000Мб Full duplex, при этом скорость не превышает 54 Мб (рисунок 2). Quote
0 drugold Posted July 20, 2020 Posted July 20, 2020 (edited) Попробуйте выбрать на обоих ПК и Кинетике "Автосогласование". Edited July 20, 2020 by drugold Quote
0 vasek00 Posted July 20, 2020 Posted July 20, 2020 (edited) (iperf3 -c .... -R -t 480)ПК(LAN)---(LAN)KN3010(LAN)---(LAN)KN1010(iperf3 -s) или (iperf3 -c .... -t 480)ПК(LAN)---(LAN)KN3010(LAN)---(LAN)KN1010(iperf3 -s) В итоге Скрытый текст / # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.130.2, port 50375 [ 5] local 192.168.130.100 port 5201 connected to 192.168.130.2 port 50376 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.02 sec 94.8 MBytes 778 Mbits/sec 0 406 KBytes [ 5] 1.02-2.02 sec 95.0 MBytes 801 Mbits/sec 0 406 KBytes [ 5] 2.02-3.02 sec 93.4 MBytes 780 Mbits/sec 0 568 KBytes [ 5] 3.02-4.03 sec 81.2 MBytes 679 Mbits/sec 0 650 KBytes [ 5] 4.03-5.04 sec 92.5 MBytes 768 Mbits/sec 0 696 KBytes [ 5] 5.04-6.02 sec 87.5 MBytes 749 Mbits/sec 0 696 KBytes [ 5] 6.02-7.01 sec 97.5 MBytes 819 Mbits/sec 0 749 KBytes [ 5] 7.01-8.02 sec 98.8 MBytes 821 Mbits/sec 0 749 KBytes [ 5] 8.02-9.02 sec 95.0 MBytes 799 Mbits/sec 0 749 KBytes [ 5] 9.02-10.02 sec 91.2 MBytes 765 Mbits/sec 0 749 KBytes [ 5] 10.02-11.02 sec 96.9 MBytes 817 Mbits/sec 0 817 KBytes [ 5] 11.02-12.01 sec 95.0 MBytes 798 Mbits/sec 0 817 KBytes [ 5] 12.01-13.02 sec 95.0 MBytes 790 Mbits/sec 0 817 KBytes [ 5] 13.02-14.02 sec 95.0 MBytes 799 Mbits/sec 0 817 KBytes [ 5] 14.02-15.02 sec 97.5 MBytes 815 Mbits/sec 0 817 KBytes [ 5] 15.02-16.02 sec 93.8 MBytes 790 Mbits/sec 0 817 KBytes [ 5] 16.02-17.02 sec 96.2 MBytes 804 Mbits/sec 0 817 KBytes iperf3: error - unable to write to stream socket: Connection reset by peer ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- ^Ciperf3: interrupt - the server has terminated / # То же самое только передача Скрытый текст / # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.130.2, port 50391 [ 5] local 192.168.130.100 port 5201 connected to 192.168.130.2 port 50392 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 78.2 MBytes 655 Mbits/sec [ 5] 1.00-2.00 sec 87.3 MBytes 732 Mbits/sec [ 5] 2.00-3.00 sec 98.9 MBytes 831 Mbits/sec [ 5] 3.00-4.00 sec 96.8 MBytes 811 Mbits/sec [ 5] 4.00-5.00 sec 88.2 MBytes 740 Mbits/sec [ 5] 5.00-6.00 sec 96.8 MBytes 812 Mbits/sec [ 5] 6.00-7.00 sec 86.9 MBytes 729 Mbits/sec [ 5] 7.00-8.00 sec 91.9 MBytes 772 Mbits/sec [ 5] 8.00-9.00 sec 86.7 MBytes 727 Mbits/sec [ 5] 9.00-10.00 sec 86.7 MBytes 727 Mbits/sec [ 5] 10.00-11.00 sec 95.8 MBytes 804 Mbits/sec [ 5] 11.00-12.00 sec 96.6 MBytes 810 Mbits/sec [ 5] 12.00-13.00 sec 95.5 MBytes 800 Mbits/sec [ 5] 13.00-14.00 sec 94.6 MBytes 794 Mbits/sec [ 5] 14.00-15.00 sec 86.9 MBytes 729 Mbits/sec [ 5] 15.00-16.00 sec 99.2 MBytes 833 Mbits/sec [ 5] 16.00-17.00 sec 87.4 MBytes 733 Mbits/sec [ 5] 17.00-18.00 sec 99.1 MBytes 832 Mbits/sec [ 5] 18.00-19.00 sec 93.0 MBytes 780 Mbits/sec [ 5] 19.00-20.00 sec 87.8 MBytes 737 Mbits/sec [ 5] 19.00-20.00 sec 87.8 MBytes 737 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-20.00 sec 1.82 GBytes 783 Mbits/sec receiver iperf3: the client has terminated ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- возможно драйвера на ПК Edited July 20, 2020 by vasek00 Quote
0 shik Posted July 21, 2020 Author Posted July 21, 2020 Сделал порты 100МБ FullDuplex, скорость 11МБ. Драйвера на ПК обновил, автосогласование пробовал. Quote
0 vk11 Posted July 21, 2020 Posted July 21, 2020 1 час назад, shik сказал: Сделал порты 100МБ FullDuplex, скорость 11МБ. Драйвера на ПК обновил, автосогласование пробовал. Ну так и что вы хотите от 100? Не 10-11 мегабайт, а 80-100 мегабайт? Извините, но вам уже сказали - поставьте везде "авто". С Риалтеком и Кинетиками на гигабите проблем нет (не встречал ). Только если кабели/пачкорды у вас фуфел. Quote
0 shik Posted July 21, 2020 Author Posted July 21, 2020 Я поставил 100МБ ради эксперимента, останется ли скорость такой же, как и на 1000МБ, вдруг проблема с автосогласованием на скорости 1000МБ. Попробую заменить патч-корды. Quote
Question
shik
Имеется 2 компьютера с сетевыми картами 1000Мб.
Настройка сетевой карты компьютера 1:
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Настройка сетевой карты компьютера 2 приведена на рисунке 1.
Порты роутера настроены 1000Мб Full duplex, при этом скорость не превышает 54 Мб (рисунок 2).
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.