You cannot set two different "if using internet connection" on two internet connections for the two leds.

They'll systematically change to the same "if using internet connection" setting on both leds.

Keenetic Titan Stable Version

C

For example, if the main Internet disconnect, the router switches to reserve WISP, if it is active wi-fi network. If you launch the access point later, the router does not see it or does not want to connect for quite a long time. 

Maybe there are any ideas on how to do it without rebooting the router?

I would like to be able to view both ranges simultaneously, both on the widget and on the tab!!!

While I have been using my Keenetic brand device without any problems and with pleasure since the first day I bought it, the updates after 4.2 that came with this new interface were a disappointment.

https://prnt.sc/ctc7ew7qSCU1

https://prnt.sc/QDr1rTBvmZRh

https://prnt.sc/2ZbRQuBIWdCI

screen record: https://we.tl/t-Z8YMSm6JGj

@eralde

Can't scroll in popup configuration windows like user config (set password), VPN setup, components select, etc.

No scrollbar, no mouse wheel reaction.

On Chrome on Android, everything is OK.

P.S. In dark theme, checked checkboxes on the components list (that cannot be unchecked and are inactive) are almost as dark as empty ones and are very hard to distinguish on mobile. Does anyone have the same? As for me I'd prefer them in lighter grey, to see they are installed but are disabled

• The Buddy 6 mesh device does not display the settings for the Home segment.

• The Hero mesh device shows the Home segment settings as locked, which seems to be a bug.

Additionally, since our mesh device might be operating in wired mode, it should be possible to adjust the 2.4GHz channel independently from the controller.

Greetings from Türkiye, together with @KYTECHNGAMING

As this issue can be also related to the Keenetic OS (not to mobile app only because of some possible incorrect information from the router), I want to ask you to check this issue here also.

The issue is that the Keenetic apps are not visible in the mobile app (and it's also impossible to manage them via the app).

I suppose that it could happen after some recent Keenetic OS updates - ex. when 4.3 dev version appeared.

The Keenetic apps can be managed only via the web-interface.

Thank you and best regards, Alex.

I installed version 4.3.1.

I check the device list every few hours. The device list is empty. The temporary solution is to restart the device.

What do u think about it?

for v4.1.7

for v4.2.1

1) When updating from 4.2 alpha 7 to the first alpha 8 the PPPoE password was deleted, we had to add it again.

2) After the update, the "mobility domain id" and "mobility domain key" fields were deleted, I filled them again, but the "mobility domain id" field is not saved. UI problem, the data is in the config.

3) The "wifi mesh system" page is not loaded in the new interface

There is no IPv4 over IPv6 provisioning for the 'NAME' connection. Click <b>Add connection</b> to configure it manually.

These are : 
1) Enable / disable
2) MBPS / KBPS selection

Feature 1 is needed because : SQM cannot be disabled, there is no control for this in the new interface. When you want to disable it, you cannot enter the value 0 or leave it empty.

The 2nd feature is needed for the following reason: Sometimes users may want to fine tune the speed in KBPS. I think it would be good to give this choice to the user.

https://ibb.co/mBtd1xD

Runner 4G (KN-2211) EAEU 4.0.7
Mostly every time system can't delete any sms
As a result when sms storage is full you can't receive any new

Tried to delete from CLI

ERROR: {
    "parse": {
        "prompt": "(sms)",
        "status": [
            {
                "status": "error",
                "code": "268239258",
                "ident": "Mobile::Sms::Manager",
                "critical": "yes",
                "message": "\"UsbLte0\": system failed [0xcffd019a]."
            }
        ]
    },
    "ndmErrors": {
        "parse.status.0": {
            "message": "\"UsbLte0\": system failed [0xcffd019a].",
            "code": "268239258"
        }
    }
}

And log file full of records like below

Kind regards.

 @eralde @Anna Zhelankina

Tr : https://ibb.co/F0fscdy
En : https://ibb.co/yQ16cNr