YevhenK

Fresh installed Windows 10 22H2 (clean install no updates), keenetic KN-1011, factory reset after installing latest 4.2.5. Can't scroll in popup configuration windows like user config (set password), VPN setup, components select, etc. No scrollbar, no mouse wheel reaction. On Chrome on Android, everything is OK. P.S. In dark theme, checked checkboxes on the components list (that cannot be unchecked and are inactive) are almost as dark as empty ones and are very hard to distinguish on mobile. Does anyone have the same? As for me I'd prefer them in lighter grey, to see they are installed but are disabled

After speaking with techsupport the bug was replicated. Waiting for fixing

Hello. If I understand correct you ISP subnet is the same as keenetic Home subnet (your WAN and Home network addresses are the same)? In this case to use it as router you have to change your Home network ip address and then the routing will take place as usual.

I think option can be set with the help of CLI: ip dhcp pool option 42 ip your.ntp.server.adress

I think this command can help you: Igmp-proxy fast-leave Look to CLI manual for more details.

1. It would be greate to make rules with source or destination as interfaces, not IP address. (Like src="br0"). It simplifies maintaining of rules when IP changes. 2. I suggest to add a feature for firewall rules to be defined with NOT logic applied to address, port (or maybe proto, and segment - that wood be greate). I can't find a way to make a NOT logic rule. I mean a rule with, for example, destination not equal to X logic. As i understand in current implementation i need to allow one and block others, or vice-versa, but this can lead to unintended interfere with other Keenetic logic applied after user custom one rules (block needed ports, just because i don't know they are used later), or make a list of rules much larger that it can be (when intersegment connection logic is controlled with firewall). 3. As I see it could be effective to allow user to make "global" firewall rules which are applied to all interfaces (segments) at once, and there will be no need to specify them for every segment manually. (It makes sense if there are more that 2 segments defined).

Have a little addition. The segment i was writing above have no dhcp pool, but while I was messing with CIDR notation in SSH (trying different masks to determine if the problem is only with /30), have looked at GUI and have got an dhcp assigned with range 10.0.100.x-10.0.100.7. This can't be correct as 10.0.100.7 is a broadcast for /30 network.

Network has mask 255.255.255.252, hotspot autoscan makes arp request to broadcast address (for example network 10.0.100.0/30 - ARP request to 10.0.100.3), but there is no such requests (to broadcast address) on larger subnet.

HTML tags are shown but not processed (pasted as it seen in UI) There is no IPv4 over IPv6 provisioning for the 'NAME' connection. Click <b>Add connection</b> to configure it manually.