KYTECHNGAMING

In local gui, this is called other connections. I think other names would be better for rmm. Example: Special connections Private connections Specific connections

Rmm: or need to show which is up / down Gui: Thanks for new updates. It seems amazing. 👍✌️

For a long time, we have been working with Keenetic Turkey on support requests. I was using Keenetic Giga before and never observed this situation. After rebuilding my mesh system with Hero DSL, I realized that although the modem and laptop were in the same place, the laptop could not stay connected at 5ghz. Either the connection was broken or I was switching to 2.4ghz after a while and continuing my uninterrupted wifi experience. Laptop wifi chipset: Realtek 8822BE 802.11ac Although I tried many self-tests and wifi drivers, the result is always the same. I bought a dongle today. ZYXEL NWD6602 AC1200 Wifi chipset: Realtek 8812BU In the same way, I did my experiments and the result immediately jumps to 2.4ghz after a 5ghz connection. When I used this laptop on my Ultra main controller mesh system with ~20 devices before, 5ghz was fine. That network is currently the main controller Peak DSL, and it also provides seamless connections within the mesh network at 5ghz. I only experience this with the Hero DSL. You will see in the video. I was wondering if anyone has experienced similar situations with a Hero DSL and a device with realtek chipset. https://streamable.com/72o4ml

@sincake https://t.me/keenetictur We would like to help you. You can also come to our telegram channel. The question caught my attention. You wrote that you had no problems with your other modem.

@PriSonerS61 send me a CF results.

I'm not sure but if this ip is 78.47.125.180 responsive on select dns server, could this ip have some blocking related to nextdns dot? Or certificate problem...

I showed how to use it in the previous message. NextDns on dns-proxy is not responding to DOT servers. Similar problem here...

If you are using WAN(ethernet) connection description, there is no problem. The name you give in the interface remains the same. And this appears in the mobile app. In DSL models, it is not enough to enter the PPPoE description in the interface. Because it continues to appear as PPPoE in the mobile application. That's why; interface PPPoE0 description "TTNET" system configuration save We run the following commands. Example of my friend @PriSonerS61 Everything looks correct. But this description disappears as we can't find the reason, and it appears as an example below. Same for my DSL connection, which is the backup provider I use, and the main provider for my other Peak DSL connection. As I said in the first sentence, the wan connection (in my example; PPPoE0) is not the problem. This only happens with DSL connections. @AlexSP @Le ecureuil

We have fixed this. Check, please Everything works well.. Thank you!

And, Without changing the torrent folder's name, I couldn't get it back. now I'm back to the old folder name again.

The problem was due to the same names of the new hdd and old hdd in my 1st message. The old hdd was never removed from the router. So I didn't make any folder changes.

Also here is buggy. When I select media folder, update button wont available. If I choose other folder and then back to chose same folder, updating library

Additions: After removing the new disk from the router, I noticed why the media server is not working. I didn't make any changes. SMB server is working correctly. Although the torrent seems to be working correctly, it seems that the connection has lost the setting related to the interface.

{ "media": { "Media0": { "usb": { "port": 2, "version": "2.00" }, "state": "ACTIVE", "manufacturer": "Kingston", "product": "DataTraveler 2.0", "serial": "5B651E00029F", "size": "1031798784", "partition": [ { "uuid": "9e1f4c42-b45a-d701-9003-4c42b45ad701", "label": "Keenetic_OPKG", "fstype": "ext4", "state": "MOUNTED", "total": "961764352", "free": "876619776" } ] }, "Media1": { "usb": { "port": 1, "version": "3.00" }, "state": "ACTIVE", "manufacturer": "USB 3.0 Device", "product": "USB 3.0 Device", "serial": "000000004FDE", "size": "1000204886016", "partition": [ { "uuid": "f3fda34d-103b-d701-90b9-a34d103bd701", "label": "Keenetic_HDD", "fstype": "ext4", "state": "MOUNTED", "total": "937074999296", "free": "416023920640" }, { "uuid": "00000000-0000-0000-0000-000000000000", "label": "", "fstype": "swap", "state": "MOUNTED", "total": "550498304", "free": "550498304" } ] }, "Media2": { "usb": { "port": 2, "version": "2.10" }, "state": "ACTIVE", "manufacturer": "Intenso", "product": "External USB 3.0", "serial": "20201108102D9", "size": "5000981078016", "partition": [ { "uuid": "ffbb0041-0d91-d701-c09a-00410d91d701", "label": "Keenetic_HDD", "fstype": "ext4", "state": "MOUNTED", "total": "4688046686208", "free": "4688046673920" } ] } }, "prompt": "(config)" }

2 different hdds. both have the same name. They are formatted as ext4. I want to transfer from old to new. I couldn't see the new hdd in windows explorer. status in Keenetic interface.... It looks like the new hdd has the old hdd and can not open sharing. When the names of the discs are the same, I guess it's a problem not being able to show them separately.

When I clicked clients, works fine but get error notifications.

When I click on connected devices, devices on all networks come up. Network specific filtering stopped working. Example:

Yes, it is desktop view; Mrs. Rybakpova I use %90 default view and then revert to default %100. View look like this. I suggest, The icon can be used instead of the download text.

Speed Limit column can be simplified.,

For example; whichever devices are connected to the Ultras seem to be connected to one Ultra if the Keenetic device names are the same. If I specify the names of Keenetic devices; PS: This situation applies to all the same names. Known as the same were bound to the same device. If I separate the names, we can understand which device is connected to which keenetic as it should be.

Oops sorry. I just check only different fw versions. 3.6.9 is ok

KeeneticOS 3.7.B.0

Thank you for support. Now, it is ok. But loading was too long to complete. Even after I entered my admin password, I thought it was stuck in verification, so I closed the window manually. Then it appeared on the dashboard.