TheBB

is coreutils-nohup installed?

create a startup script, e.g.: cat > /opt/etc/init.d/S90zerotier <<EOF #!/bin/sh ENABLED=yes PROCS=zerotier-one ARGS="-d" PREARGS="" DESC=$PROCS PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin . /opt/etc/init.d/rc.func EOF and make it executable chmod +x /opt/etc/init.d/S90zerotier ~ # /opt/etc/init.d/S90zerotier start Starting zerotier-one... done. ~ # /opt/etc/init.d/S90zerotier check Checking zerotier-one... alive. ~ # /opt/etc/init.d/S90zerotier stop Checking zerotier-one... alive. Shutting down zerotier-one... done. ~ # /opt/etc/init.d/S90zerotier check Checking zerotier-one... dead. ~ # /opt/etc/init.d/S90zerotier start Starting zerotier-one... done. ~ # /opt/etc/init.d/S90zerotier restart Shutting down zerotier-one... done. Starting zerotier-one... done. ~ # /opt/etc/init.d/S90zerotier check Checking zerotier-one... alive. ~ #

The dependencies are broken. step by step one by one "Extra" is a weak device (ну, что поделать) The first post was updated

All the old packages are here. You can install them manually, e.g. `opkg install http://bin.entware.net/mipselsf-k3.4/archive/php7_7.2.22-1_mipsel-3.4.ipk`. You can also try installing "Nextcloud". (in RU)

Yes, it is (or the installer in English for your device)

Your device with CPU on MIPS (Big Endian) architectures, so You must use the mipssf-k3.4 repository only. Installer for Your device is here (in Russian), in English will be later.

Attention! Keenetic provides no official support for third-party packages, such as Entware. If you have questions, comments, or suggestions, feel free to post them here. Requirements To start using Entware on Keenetic, you need: A Keenetic router with a USB port (except Keenetic 4G) running NDMS 2.07 or higher Either "File and printer sharing (SMB/CIFS protocols)", or "FTP server" component installed The "Open Package support" component installed A USB disk with an ext2/ext3/ext4 partition Important: Keenetic should be connected to the Internet. Installation instructions Connect your USB storage to Keenetic Share the ext2/ext3/ext4 partition via FTP or SMB/CIFS Create the "install" directory Copy the following archive to the "install" directory: EN_mipsel-installer.tar.gz ; for KN-2011 and KN-2111 - EN_mips-installer.tar.gz; for KN-2710 - EN_aarch64-installer.tar.gz Go to the Keenetic web interface: "Applications » OPKG", check "Enable", select the USB drive, and click "Apply" Wait for the following message in the system log: "... installer: [5/5] Entware installed!" ... [I] Mar 17 14:47:57 ndm: Opkg::Manager: disk is set to: 13af943c-7374-46f1-9256-f2cc76c2ff1a: [I] Mar 17 14:47:58 ndm: kernel: EXT4-fs (sdd1): re-mounted. Opts: (null) [I] Mar 17 14:47:58 ndm: Opkg::Manager: /tmp/mnt/E-3x_test mounted to /tmp/mnt/E-3x_test. [I] Mar 17 14:47:58 ndm: Opkg::Manager: /tmp/mnt/E-3x_test mounted to /opt/. [I] Mar 17 14:47:58 npkg: inflating "EN_mipsel-installer(1).tar.gz". [I] Mar 17 14:47:59 ndm: Opkg::Manager: /tmp/mnt/E-3x_test initialized. [I] Mar 17 14:47:59 ndm: Opkg::Manager: init script reset to default: /opt/etc/initrc. [E] Mar 17 14:47:59 ndm: Opkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/. [I] Mar 17 14:47:59 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Partition is OK. [I] Mar 17 14:47:59 ndm: Core::ConfigurationSaver: saving configuration... [I] Mar 17 11:47:59 installer: [1/5] Starting Entware deployment... [I] Mar 17 11:47:59 installer: [2/5] Basic packages installation... [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/Packages.gz. [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updated list of available packages in /opt/var/opkg-lists/entware. [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz. [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updated list of available packages in /opt/var/opkg-lists/keendev. [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing opt-ndmsv2 (1.0-10a) to root... [I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/opt-ndmsv2_1.0-10a_mipsel-3.4_kn.ipk. [I] Mar 17 14:48:03 ndm: Core::ConfigurationSaver: configuration saved. [I] Mar 17 14:48:03 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libc (2.27-8) to root... [I] Mar 17 14:48:03 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libc_2.27-8_mipsel-3.4.ipk. [I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libgcc (7.3.0-8) to root... [I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libgcc_7.3.0-8_mipsel-3.4.ipk. [I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libssp (7.3.0-8) to root... [I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libssp_7.3.0-8_mipsel-3.4.ipk. [I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing librt (2.27-8) to root... [I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/librt_2.27-8_mipsel-3.4.ipk. [I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libpthread (2.27-8) to root... [I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libpthread_2.27-8_mipsel-3.4.ipk. [I] Mar 17 14:48:10 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libstdcpp (7.3.0-8) to root... [I] Mar 17 14:48:10 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libstdcpp_7.3.0-8_mipsel-3.4.ipk. [I] Mar 17 14:48:12 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing ldconfig (2.27-8) to root... [I] Mar 17 14:48:12 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/ldconfig_2.27-8_mipsel-3.4.ipk. [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing findutils (4.6.0-1) to root... [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/findutils_4.6.0-1_mipsel-3.4.ipk. [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing terminfo (6.1-1) to root... [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/terminfo_6.1-1_mipsel-3.4.ipk. [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing ndmq (1.0.2-3) to root... [I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/ndmq_1.0.2-3_mipsel-3.4_kn.ipk. [I] Mar 17 14:48:15 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libndm (1.8.0-1) to root... [I] Mar 17 14:48:15 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/libndm_1.8.0-1_mipsel-3.4_kn.ipk. [I] Mar 17 14:48:16 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing locales (2.27-8) to root... [I] Mar 17 14:48:16 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/locales_2.27-8_mipsel-3.4.ipk. [I] Mar 17 14:48:18 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing grep (2.26-1) to root... [I] Mar 17 14:48:18 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/grep_2.26-1_mipsel-3.4.ipk. [I] Mar 17 14:48:19 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libpcre (8.41-2) to root... [I] Mar 17 14:48:19 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libpcre_8.41-2_mipsel-3.4.ipk. [I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing zoneinfo-asia (2018c-1) to root... [I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-asia_2018c-1_mipsel-3.4.ipk. [I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing zoneinfo-europe (2018c-1) to root... [I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2018c-1_mipsel-3.4.ipk. [I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing entware-release (1.0-2) to root... [I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/entware-release_1.0-2_all.ipk. [I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing opkg (2011-04-08-9c97d5ec-17b) to root... [I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/opkg_2011-04-08-9c97d5ec-17b_mipsel-3.4.ipk. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing dropbear (2017.75-5) to root... [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/dropbear_2017.75-5_mipsel-3.4.ipk. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Entware uses separate locale-archive file independent from main system. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: You can download locale sources from http://pkg.entware.net/sources/i18n_glib227.tar.gz. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: You can add new locales to Entware using /opt/bin/localedef.new. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updating /opt/etc/ld.so.cache... done. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Package ndmq (1.0.2-3) installed in root is up to date. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libgcc. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libc. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libssp. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libpthread. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring librt. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring terminfo. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring ldconfig. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libpcre. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring grep. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring locales. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring opkg. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring zoneinfo-europe. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring zoneinfo-asia. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libndm. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring ndmq. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring dropbear. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libstdcpp. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring findutils. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring entware-release. [I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring opt-ndmsv2. [I] Mar 17 11:48:34 installer: Info: Packages installed... [I] Mar 17 11:48:34 installer: [3/5] Generating SSH keys... [I] Mar 17 14:48:34 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Generating key, this may take a while... [I] Mar 17 14:48:36 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: .Generating key, this may take a while... [I] Mar 17 11:48:38 installer: [4/5] Setting timezone, script initrc and starting dropbear... [I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket. [I] Mar 17 14:48:38 ndm: Core::Server: client disconnected. [I] Mar 17 11:48:38 dropbear[20781]: Running in background [I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket. [I] Mar 17 14:48:38 ndm: Opkg::Manager: configured init script: "/opt/etc/init.d/rc.unslung". [I] Mar 17 14:48:38 ndm: Core::Server: client disconnected. [I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket. [I] Mar 17 14:48:38 ndm: Core::ConfigurationSaver: saving configuration... [I] Mar 17 14:48:38 ndm: Core::Server: client disconnected. [I] Mar 17 11:48:38 installer: [5/5] Entware installed! [I] Mar 17 11:48:38 installer: Log on at root:keenetic@my.keenetic.net -p 222 to start new SSH session. [I] Mar 17 14:48:38 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: . [I] Mar 17 14:48:42 ndm: Core::ConfigurationSaver: configuration saved. ... Further steps Connect to the Keenetic by SSH (login/password: root/keenetic) (if installed component "SSH server", connect to the port 222) Update package list opkg update For example, install midnight commander opkg install mc You can find the list of basic packages here and additional packages for Keenetic here

Introduction Syncthing replaces proprietary sync and cloud services with something open, trustworthy and decentralized. Your data is your data alone and you deserve to choose where it is stored, if it is shared with some third party and how it's transmitted over the Internet. Requirements RAM >= 128 MB and swap Installation Install necessary packages: opkg install syncthing Start syncthing: /opt/etc/init.d/S92syncthing start Using Syncthing On the first run it may take several minutes to generate certificates. Wait and open http://<ip address of device>:8384 and configure it.

Introduction Tor is free software and an open network that helps you defend against traffic analysis, a form of network surveillance that threatens personal freedom and privacy, confidential business activities and relationships, and state security. Installation Install necessary packages: opkg install polipo tor Edit /opt/etc/tor/torrc (uncomment the following strings): SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections. SOCKSPort 192.168.1.1:9100 # Bind to this address:port too. RunAsDaemon 1 DataDirectory /opt/var/lib/tor Edit /opt/etc/polipo/config (uncomment and change the following strings): proxyAddress = "0.0.0.0" # IPv4 only allowedClients = 127.0.0.1, 192.168.1.0/24 socksParentProxy = "localhost:9050" socksProxyType = socks5 dnsQueryIPv6 = no dnsUseGethostbyname = yes Start tor and polipo: /opt/etc/init.d/S28polipo start /opt/etc/init.d/S35tor start Using Tor Configure your web browser. For example, Firefox: Visit https://check.torproject.org/ to check if you got it right.

Adapted for Keenetic, the original manual is here. Introduction OwnCloud provides universal access to your files via the web, computer or mobile devices — wherever you are. Attention Requirements Ability to open TCP81 port to access ownCloud from internet. Installation Install necessary packages: opkg install bzip2 curl lighttpd-mod-access lighttpd-mod-fastcgi php7-cgi php7-mod-ctype \ php7-mod-curl php7-mod-dom php7-mod-fileinfo php7-mod-gd php7-mod-iconv php7-mod-intl \ php7-mod-json php7-mod-mbstring php7-mod-pdo-sqlite php7-mod-session php7-mod-simplexml \ php7-mod-sqlite3 php7-mod-xml php7-mod-xmlreader php7-mod-xmlwriter php7-mod-zip Download and unpack ownCloud files: curl https://download.owncloud.org/community/testing/owncloud-10.4.0RC1.tar.bz2 | \ bzip2 -cd | tar -xvC /opt/share/www/ Create the file `/opt/etc/lighttpd/conf.d/clouds.conf` and add following strings: server.port = 81 fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/tmp/php-fcgi.sock", "bin-path" => "/opt/bin/php-fcgi", "max-procs" => 1, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "1000" ) ) ) ) $HTTP["url"] =~ "^/owncloud/data/" { url.access-deny = ("") } $HTTP["url"] =~ "^/owncloud($|/)" { dir-listing.activate = "disable" } Edit /opt/etc/php.ini: upload_max_filesize = 100M post_max_size = 100M memory_limit = 32M Start lighttpd: /opt/etc/init.d/S80lighttpd start Using Owncloud Open http://<ip address of device>:81/owncloud and create a new account. You can access your files using the Web interface, or a Desktop/Mobile app.