Jump to content
  • 0

Пропал LAN


Remarque
 Share

Question

Привет! Минск на связи

Keenetic Giga KN-1010 утром резко пропал LAN - до этого 4 месяца без проблем. По всем портам. Вафля работает как часы.  Как у настоящего ламера у меня все настройки центра "По умолчанию". У провайдера айпи динамический. Что делать, как быть? Пробовал играться с ДНС - или не то делал, или не сработали манипуляции. Естественно, делал ребуты.

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0
30 минут назад, Remarque сказал:

Привет! Минск на связи

Keenetic Giga KN-1010 утром резко пропал LAN - до этого 4 месяца без проблем. По всем портам. Вафля работает как часы.  Как у настоящего ламера у меня все настройки центра "По умолчанию". У провайдера айпи динамический. Что делать, как быть? Пробовал играться с ДНС - или не то делал, или не сработали манипуляции. Естественно, делал ребуты.

Для начала конф файл и раздел

interface Bridge0
    rename Home
    description "Home VLAN"
    inherit GigabitEthernet0/Vlan1
    include AccessPoint
    include AccessPoint_5G

строка inherit GigabitEthernet0/Vlan1 и есть наличие LAN портов в дом.сети. В логах или selftest найти записи по конф.Bridge0

[I] Apr 21 18:17:18 ndm: Network::Interface::Base: "Bridge0": interface is down. 
[I] Apr 21 18:17:18 ndm: Network::Interface::Base: "Bridge0": network MTU reset to default. 
[I] Apr 21 18:17:18 ndm: Network::Interface::Base: "Bridge0": interface is up. 
[I] Apr 21 18:17:18 ndm: Network::Interface::Repository: "Bridge0" interface created. 
[I] Apr 21 18:17:19 ndm: Network::Interface::Base: "Bridge0": renamed to "Home". 
[I] Apr 21 18:17:19 ndm: Network::Interface::Base: "Bridge0": description saved. 
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered blocking state
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered disabled state
[I] Apr 21 18:17:19 kernel: device eth2.1 entered promiscuous mode
[I] Apr 21 18:17:19 kernel: device eth2 entered promiscuous mode
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered blocking state
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered forwarding state
[I] Apr 21 18:17:19 kernel: br0: disabled STP choke for port 1(eth2.1)
[I] Apr 21 18:17:19 ndm: Network::Interface::Base: "Bridge0": interface is up. 
[I] Apr 21 18:17:19 ndm: Network::Interface::Mac: "Bridge0": backed up the default address 50:хх:хх:хх:хх:хх of "Home" before changing. 
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered disabled state
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered blocking state
[I] Apr 21 18:17:19 kernel: br0: port 1(eth2.1) entered forwarding state
[I] Apr 21 18:17:19 ndm: Network::Interface::Ip: "Bridge0": IP address cleared. 
[I] Apr 21 18:17:19 ndm: Network::Interface::Ip: "Bridge0": IP address cleared. 
[I] Apr 21 18:17:19 ndm: Network::Interface::Ip: "Bridge0": global priority unchanged. 
[I] Apr 21 18:17:19 ndm: Network::Interface::Ip: "Bridge0": global priority cleared. 
****************
[I] Apr 21 18:17:19 ndm: Network::Interface::Bridge: "Bridge0": GigabitEthernet0/Vlan1 inherited in Bridge0. 
****************
[I] Apr 21 18:17:19 kernel: br0: port 2(ra0) entered blocking state
[I] Apr 21 18:17:19 kernel: br0: port 2(ra0) entered disabled state
[I] Apr 21 18:17:20 kernel: device ra0 entered promiscuous mode
[I] Apr 21 18:17:20 kernel: br0: disabled STP choke for port 2(ra0)
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered disabled state
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered blocking state
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered forwarding state
[I] Apr 21 18:17:20 ndm: Network::Interface::Bridge: "Bridge0": AccessPoint included. 
[I] Apr 21 18:17:20 kernel: br0: port 3(rai0) entered blocking state
[I] Apr 21 18:17:20 kernel: br0: port 3(rai0) entered disabled state
[I] Apr 21 18:17:20 kernel: device rai0 entered promiscuous mode
[I] Apr 21 18:17:20 kernel: br0: disabled STP choke for port 3(rai0)
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered disabled state
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered blocking state
[I] Apr 21 18:17:20 kernel: br0: port 1(eth2.1) entered forwarding state
****************
[I] Apr 21 18:17:20 ndm: Network::Interface::Bridge: "Bridge0": AccessPoint_5G included. 
....

eth2.1 интерфейс LAN портов, в Bridge0 или он же br0 (тдт он же основной интерфейс роутера) =  wifi (2,4 и 5) и плюс LAN или

/ # brctl show
bridge name     bridge id               STP enabled     interfaces
br0             8000.50ххххххххххх      no              eth2.1
                                                        rai0
                                                        ra4.1
                                                        rai4.1
                                                        ra0
/ # 

eth2.1 - LAN
raiх и rax - wifi

inherit GigabitEthernet0/Vlan1
include AccessPoint
include AccessPoint_5G

 

Edited by vasek00
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...