Jump to content
  • 0

Не открывается dashboard на peak 3.8


r13

Question

Привет, после обновления dashboard зависал при открытии

@eralde посмотрел в чем проблема, вердикт следующий:

В show usb флешки нет, а в show media -- есть.
Интерфейс пытается считать название флешки из show usb и ломается.

 

Прикладываю селфтест если понадобится дополнительная диагностика.

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Peak - 381 - все открывается с момента обновления, только подключен HDD к USB3

 

Скрытый текст
{
    "usb": {
        "device": {
            "Media0": {
                "DEVICE": "/devices/platform/1a0c0000.usb/usb2/2-1/2-1:1.0",
                "DEVPATH": "/devices/platform/1a0c0000.usb/usb2/2-1/2-1:1.0/host0/target0:0:0/0:0:0:0/block/sda",
                "manufacturer": "",
                "product": "",
                "serial": "20.....1",
                "subsystem": "media",
                "port": "1",
                "power-control": "yes",
                "usb-version": "3.00"
            }
        }
    },
    "prompt": "(config)"
}




{
    "media": {
        "Media0": {
            "usb": {
                "port": 1,
                "version": "3.00"
            },
            "state": "ACTIVE",
            "manufacturer": "",
            "product": "",
            "serial": "20....1",
            "size": "500107862016",
            "partition": [
                {
                    "uuid": "01.......A0",
                    "label": "D3-1",
                    "fstype": "ntfs",
                    "state": "MOUNTED",
                    "total": "492847489024",
                    "free": "170741981184"
                },
                {
                    "uuid": "00000000-0000-0000-0000-000000000000",
                    "label": "",
                    "fstype": "swap",
                    "state": "MOUNTED",
                    "total": "2146430976",
                    "free": "2146430976"
                },
                {
                    "uuid": "fee7......701",
                    "label": "D3-2",
                    "fstype": "ext4",
                    "state": "MOUNTED",
                    "total": "4783122432",
                    "free": "4482370560"
                }
            ]
        }
    },
    "prompt": "(config)"
}

 

При добавление flash на USB2 порт не чего не изменило, все открывается как и ранее. Отображение правильное.

Скрытый текст
{
    "usb": {
        "device": {
            "Media0": {
                "DEVICE": "/devices/platform/1a0c0000.usb/usb2/2-1/2-1:1.0",
                "DEVPATH": "/devices/platform/1a0c0000.usb/usb2/2-1/2-1:1.0/host0/target0:0:0/0:0:0:0/block/sda",
                "manufacturer": "",
                "product": "",
                "serial": "20....1",
                "subsystem": "media",
                "port": "1",
                "power-control": "yes",
                "usb-version": "3.00"
            },
            "Media1": {
                "DEVICE": "/devices/platform/1a0c0000.usb/usb1/1-1/1-1:1.0",
                "DEVPATH": "/devices/platform/1a0c0000.usb/usb1/1-1/1-1:1.0/host1/target1:0:0/1:0:0:0/block/sdb",
                "manufacturer": "        ",
                "product": "USB DISK 2.0", ********** flash
                "serial": "070B......2",
                "subsystem": "media",
                "port": "2",
                "power-control": "yes",
                "usb-version": "2.00"
            }
        }
    },
    "prompt": "(config)"
}



{
    "media": {
        "Media0": {
            "usb": {
                "port": 1,
                "version": "3.00"
            },
            "state": "ACTIVE",
            "manufacturer": "",
 ...
                    "total": "4783122432",
                    "free": "4482370560"
                }
            ]
        },
        "Media1": {
            "usb": {
                "port": 2,
                "version": "2.00"
            },
            "state": "ACTIVE",
            "manufacturer": "        ",
            "product": "USB DISK 2.0", ********** flash
            "serial": "070.....2",
            "size": "4009754624",
            "partition": [
                {
                    "uuid": "01D....670",
                    "label": "F4-1",
                    "fstype": "ntfs",
                    "state": "MOUNTED",
                    "total": "2929717248",
                    "free": "2908741632"
                },
                {
                    "uuid": "e0ffd5......701",
                    "label": "F4-2",
                    "fstype": "ext4",
                    "state": "MOUNTED",
                    "total": "1001713664",
                    "free": "1001710592"
                }
            ]
        }
    },
    "prompt": "(config)"
}

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...