Jump to content
Как правильно добавить self-test и прочую отладку в тему
Где взять тестовые сборки
  • 0

Конфликт CdcEthernet0 и L2TP

vitalik6243

Asked by vitalik6243,

 Share

Question

vitalik6243 Advanced Member

vitalik6243

Posted
Posted

Проблема с подключением по L2TP с модемом ZTE MF831

Ultra 2

Прошивка последняя

Feb 25 09:07:31syslogNetwork::Interface::Base: "L2TP0": interface is up.
Feb 25 09:07:31syslogNetwork::Interface::IP: "L2TP0": global priority is 2.
Feb 25 09:07:31syslogNetwork::Interface::Base: "L2TP0": description saved.
Feb 25 09:07:31syslogNetwork::Interface::PPP: enabled connection via CdcEthernet0 interface.
Feb 25 09:07:31syslogNetwork::Interface::Secure: authnentication is unchanged.
Feb 25 09:07:31syslogDns::InterfaceSpecific: static name server list cleared on L2TP0.
Feb 25 09:07:31syslogNetwork::Interface::Secure: identity is unchanged.
Feb 25 09:07:31syslogNetwork::Interface::IP: "L2TP0": IP address cleared.
Feb 25 09:07:33pppd[7791]Plugin pppol2tp.so loaded.
Feb 25 09:07:33pppd[7791]pppd 2.4.4-4 started by root, uid 0
Feb 25 09:07:34syslogNetwork::Interface::L2TP: "L2TP0": added host route to 195.88.208.133 via 7.7.7.7.
Feb 25 09:07:34pppd[7793]l2tp_control v2.02 
Feb 25 09:07:34pppd[7793]l2tp: remote host: 195.88.208.133 
Feb 25 09:07:34pppd[7793]l2tp: bind: 7.7.7.153 
Feb 25 09:07:34ndmkernel: Fast VPN ctrl: setup for src 195.88.208.133
Feb 25 09:07:34pppd[7791]Using interface ppp0
Feb 25 09:07:34pppd[7791]Connect: ppp0 <--> l2tp[0]
Feb 25 09:07:37pppd[7791]CHAP authentication succeeded
Feb 25 09:07:37pppd[7791]local  IP address 7.7.7.153
Feb 25 09:07:37pppd[7791]remote IP address 195.88.208.133
Feb 25 09:07:37pppd[7791]primary   DNS address 8.8.8.8
Feb 25 09:07:37pppd[7791]secondary DNS address 8.8.4.4
Feb 25 09:07:37pppd[7791]IPCP terminated by peer (Unauthorized remote IP address)
Feb 25 09:07:37pppd[7791]Connect time 0.0 minutes.
Feb 25 09:07:37pppd[7791]Sent 82 bytes, received 98 bytes.
Feb 25 09:07:37syslogNetwork::Interface::Base: "L2TP0": interface is up.
Feb 25 09:07:37syslogNetwork::Interface::PPP: interface "L2TP0" is global, priority 2.
Feb 25 09:07:37syslogNetwork::Interface::PPP: adding default route via L2TP0.
Feb 25 09:07:37syslogNetwork::Interface::PPP: adding nameserver 8.8.8.8.
Feb 25 09:07:37ndnproxyupdating configuration...
Feb 25 09:07:37syslogDns::Manager: name server 8.8.8.8 added, domain (default).
Feb 25 09:07:37syslogNetwork::Interface::PPP: adding nameserver 8.8.4.4.
Feb 25 09:07:37syslogDns::Manager: name server 8.8.4.4 added, domain (default).
Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": network 7.7.7.153/32 conflicts with interface "CdcEthernet0".
Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": IP address cleared.
Feb 25 09:07:37pppd[7791]LCP terminated by peer (No network protocols running)
Feb 25 09:07:37ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 09:07:37ndnproxyupdating configuration...
Feb 25 09:07:37ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 09:07:37pppd[7791]Hangup (SIGHUP)
Feb 25 09:07:40pppd[7791]Connection terminated.
Feb 25 09:07:40pppd[7791]Modem hangup
Feb 25 09:07:40pppd[7791]Exit.

И еще слабенько работает порт USB3.0

RzbUNbp.png

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0
ndm Honored Flooder

ndm

Posted
Posted
Проблема с подключением по L2TP с модемом ZTE MF831

Ultra 2

Прошивка последняя

Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": network 7.7.7.153/32 conflicts with interface "CdcEthernet0".

Интересно. Можно "show interface" посмотреть, когда ZTE подключен?
Link to comment
Share on other sites
  • 0
vitalik6243 Advanced Member

vitalik6243

Posted
  • Author
Posted
Проблема с подключением по L2TP с модемом ZTE MF831

Ultra 2

Прошивка последняя

Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": network 7.7.7.153/32 conflicts with interface "CdcEthernet0".

Интересно. Можно "show interface" посмотреть, когда ZTE подключен?

Feb 25 13:36:12syslogComponents::Manager: init remote completed.
Feb 25 13:36:16ndmkernel: usb 1-2: USB disconnect, device number 5
Feb 25 13:36:16ndmkernel: rndis_host 1-2:1.0: usb0: unregister 'rndis_host' usb-xhc_mtk-2, RNDIS device
Feb 25 13:36:17syslogNetwork::Interface::Usb: interface "CdcEthernet0" is unplugged.
Feb 25 13:36:17syslogNetwork::Interface::IP: "CdcEthernet0": IP address cleared.
Feb 25 13:36:17ndhcpcCdcEthernet0: sending RELEASE for 7.7.7.153 to 7.7.7.7.
Feb 25 13:36:17syslogDhcp::Client: DHCP server is not responding.
Feb 25 13:36:17ndnproxyupdating configuration...
Feb 25 13:36:17ndhcpcCdcEthernet0: NDM DHCP client stopped (exit status 0).
Feb 25 13:36:17ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 13:36:17ndnproxyupdating configuration...
Feb 25 13:36:17ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 13:36:18syslogCore::Session: client disconnected.
Feb 25 13:36:29ndmkernel: usb 1-2: new high speed USB device number 6 using xhc_mtk
Feb 25 13:36:29ndmkernel: rndis_host 1-2:1.0: usb0: register 'rndis_host' at usb-xhc_mtk-2, RNDIS device, 36:4b:50:b7:ef:da
Feb 25 13:36:29ndmkernel: scsi4 : usb-storage 1-2:1.2
Feb 25 13:36:29syslogNetwork::Interface::Usb: interface "CdcEthernet0" is plugged (port 1).
Feb 25 13:36:30ndmkernel: scsi 4:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Feb 25 13:36:30ndmkernel: sr0: scsi3-mmc drive: 0x/0x caddy
Feb 25 13:36:30ndmkernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
Feb 25 13:36:30ndmkernel: sr 4:0:0:0: Attached scsi generic sg0 type 5
Feb 25 13:36:31ndmkernel: scsi 4:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
Feb 25 13:36:31ndmkernel: sd 4:0:0:1: Attached scsi generic sg1 type 0
Feb 25 13:36:31ndmkernel: sd 4:0:0:1: [sda] Attached SCSI removable disk
Feb 25 13:36:32ndhcpcCdcEthernet0: NDM DHCP client (version 3.1.1) started.
Feb 25 13:36:32ndhcpcCdcEthernet0: NDM DHCP client stopped (exit status 0).
Feb 25 13:36:34ndhcpcCdcEthernet0: NDM DHCP client (version 3.1.1) started.
Feb 25 13:36:38syslogFileSystem::Ext: failed to open "/dev/sda" device to mount.
Feb 25 13:36:38syslogFileSystem::Ext: failed to create a new filesystem.
Feb 25 13:36:41wmondWifiMaster0/AccessPoint0: (RT2860) STA(94:35:0a:3f:24:ef) had disassociated.
Feb 25 13:36:43wmondWifiMaster1/AccessPoint0: (RT2860) STA(94:35:0a:3f:24:ef) had associated successfully.
Feb 25 13:36:44ndhcpcCdcEthernet0: received OFFER for 7.7.7.153 from 7.7.7.7.
Feb 25 13:36:44ndhcpcCdcEthernet0: received ACK for 7.7.7.153 from 7.7.7.7.
Feb 25 13:36:44syslogDhcp::Client: configuring interface CdcEthernet0.
Feb 25 13:36:44syslogNetwork::Interface::IP: "CdcEthernet0": IP address is 7.7.7.153/24.
Feb 25 13:36:44syslogDhcp::Client: obtained IP address 7.7.7.153/24.
Feb 25 13:36:44syslogDhcp::Client: interface "CdcEthernet0" is global, priority 1.
Feb 25 13:36:44syslogDhcp::Client: adding a default route via 7.7.7.7.
Feb 25 13:36:44syslogDhcp::Client: adding name server 7.7.7.7.
Feb 25 13:36:44ndnproxyupdating configuration...
Feb 25 13:36:44ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 13:36:44syslogDns::Manager: name server 7.7.7.7 added, domain (default).
Feb 25 13:36:44ndhcpsVPN0: NDM DHCP server stopped (exit status: 0).
Feb 25 13:36:44ndnproxyupdating configuration...
Feb 25 13:36:44ndnproxystats. file: /var/ndnproxymain.stat.
Feb 25 13:36:44wmondWifiMaster1/AccessPoint0: (RT2860) STA(94:35:0a:3f:24:ef) set key done in WPA2/WPA2PSK.
Feb 25 13:36:45ndhcps_WEBADMIN: DHCPREQUEST received (STATE_INIT) for 192.168.2.169 from 94:35:0a:3f:24:ef.
Feb 25 13:36:45ndhcps_WEBADMIN: sending ACK of 192.168.2.169 to 94:35:0a:3f:24:ef.
Feb 25 13:36:46ndhcpsVPN0: NDM DHCP server (version 3.1.1) started.
Feb 25 13:36:46pptpd[9516]accel-pptpd-0.8.5 compiled for linux-2.6.36 
Feb 25 13:36:46pptpd[9516]MGR: Manager process started
Feb 25 13:36:46pptpd[9516]MGR: Maximum of 10 connections available
Feb 25 13:36:46syslogCore::Server: started Session 127.0.0.1:58240.
Feb 25 13:36:46miniupnpdHTTP listening on port 51534
Feb 25 13:36:46miniupnpdlistening for NAT-PMP traffic on port 5351

Link to comment
Share on other sites
  • 0
ndm Honored Flooder

ndm

Posted
Posted
Проблема с подключением по L2TP с модемом ZTE MF831

Ultra 2

Прошивка последняя

Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": network 7.7.7.153/32 conflicts with interface "CdcEthernet0".

Интересно. Можно "show interface" посмотреть, когда ZTE подключен?
Уточняю вопрос: "show interface" — такая команда в CLI. В логе толком не видно. Можете прислать self-test, если не разберетесь. Хотим посмотреть, какой адрес у интерфейса CdcEthernet0, и почему оно пишет про конфликт.
Link to comment
Share on other sites
  • 0
vitalik6243 Advanced Member

vitalik6243

Posted
  • Author
Posted
Проблема с подключением по L2TP с модемом ZTE MF831

Ultra 2

Прошивка последняя

Feb 25 09:07:37syslogNetwork::Interface::IP: "L2TP0": network 7.7.7.153/32 conflicts with interface "CdcEthernet0".

Интересно. Можно "show interface" посмотреть, когда ZTE подключен?
Уточняю вопрос: "show interface" — такая команда в CLI. В логе толком не видно. Можете прислать self-test, если не разберетесь. Хотим посмотреть, какой адрес у интерфейса CdcEthernet0, и почему оно пишет про конфликт.

Interface, name = "CdcEthernet0"
              id: CdcEthernet0
           index: 0
            type: CdcEthernet
     description:
            link: up
       connected: yes
           state: up
             mtu: 1500
        tx-queue: 1000
         address: 7.7.7.153
            mask: 255.255.255.0
          uptime: 22470
          global: yes
       defaultgw: yes
        priority: 1
  security-level: public
          usedby: L2TP0
          usedby: PPTP0
             mac: 36:4b:50:b7:ef:da
       auth-type: none
         plugged: yes
          vendor: 19d2
           model: 1403
    manufacturer: ZTE,Incorporated
         product: ZTE Wireless Ethernet Adapter
          serial:
                  MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0

Link to comment
Share on other sites
  • 0
ndm Honored Flooder

ndm

Posted
Posted
Интересно. Можно "show interface" посмотреть, когда ZTE подключен?
Уточняю вопрос: "show interface" — такая команда в CLI. В логе толком не видно. Можете прислать self-test, если не разберетесь. Хотим посмотреть, какой адрес у интерфейса CdcEthernet0, и почему оно пишет про конфликт.

Interface, name = "CdcEthernet0"
              id: CdcEthernet0
           index: 0
            type: CdcEthernet
     description:
            link: up
       connected: yes
           state: up
             mtu: 1500
        tx-queue: 1000
         address: 7.7.7.153
            mask: 255.255.255.0
          uptime: 22470
          global: yes
       defaultgw: yes
        priority: 1
  security-level: public
          usedby: L2TP0
          usedby: PPTP0
             mac: 36:4b:50:b7:ef:da
       auth-type: none
         plugged: yes
          vendor: 19d2
           model: 1403
    manufacturer: ZTE,Incorporated
         product: ZTE Wireless Ethernet Adapter
          serial:
                  MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0

И правда конфликт. Какая-то завёрнутая у Вас конфигурация. L2TP и PPTP поверх 3G-модемного соединения. Что показывает "show interface", когда этих подключений нет?
Link to comment
Share on other sites
  • 0
vitalik6243 Advanced Member

vitalik6243

Posted
  • Author
Posted
Уточняю вопрос: "show interface" — такая команда в CLI. В логе толком не видно. Можете прислать self-test, если не разберетесь. Хотим посмотреть, какой адрес у интерфейса CdcEthernet0, и почему оно пишет про конфликт.

Interface, name = "CdcEthernet0"
              id: CdcEthernet0
           index: 0
            type: CdcEthernet
     description:
            link: up
       connected: yes
           state: up
             mtu: 1500
        tx-queue: 1000
         address: 7.7.7.153
            mask: 255.255.255.0
          uptime: 22470
          global: yes
       defaultgw: yes
        priority: 1
  security-level: public
          usedby: L2TP0
          usedby: PPTP0
             mac: 36:4b:50:b7:ef:da
       auth-type: none
         plugged: yes
          vendor: 19d2
           model: 1403
    manufacturer: ZTE,Incorporated
         product: ZTE Wireless Ethernet Adapter
          serial:
                  MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0

И правда конфликт. Какая-то завёрнутая у Вас конфигурация. L2TP и PPTP поверх 3G-модемного соединения. Что показывает "show interface", когда этих подключений нет?

Помню наблюдал такую же проблему на Giga 2. Но как то исправилась сама собой после перезагрузок, тут вообще без вариантов) PPTP работает L2TP нет. Вот щас без интерфейсов VPN.

Interface, name = "CdcEthernet0"
              id: CdcEthernet0
           index: 0
            type: CdcEthernet
     description:
            link: up
       connected: yes
           state: up
             mtu: 1500
        tx-queue: 1000
         address: 7.7.7.153
            mask: 255.255.255.0
          uptime: 163867
          global: yes
       defaultgw: yes
        priority: 1
  security-level: public
             mac: 36:4b:50:b7:ef:da
       auth-type: none
         plugged: yes
          vendor: 19d2
           model: 1403
    manufacturer: ZTE,Incorporated
         product: ZTE Wireless Ethernet Adapter
          serial:
                  MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...