Support UPS connect to USB

[Andrej Kuzmin]

Good afternoon. 
I propose to enable support in Keenetic routers for connecting UPS power supplies via USB. To be able to monitor and control from Keenetic routers the UPS power supplies unit connected via USB.

This is important for remote video surveillance centers connected to the Internet via Keenetic routers.

Thanks, Andrej Kuzmin

[Andrej Kuzmin]

I know. And I propose to include this function in the standard assembly.

[vst]

It is possible to get this functionality by installing external packages.  Entware Keenetic

For example, to monitor APC UPS the following Entware packages may be used: apcupsd, apcupsd-cgi.
 

[DBP]

Доброго времени суток. Пакеты Entware: apcupsd, apcupsd-cgi  установленны. Какие далее настройки , что бы в веб интерфейсе смотреть? Как заставить работать  web ?

apcupsd.conf сменил :

UPSCABLE usb
UPSTYP usb
DEVICE (пусто)

~ # apcaccess
APC      : 001,036,0876
DATE     : 2023-10-30 13:07:28 +0300  
HOSTNAME : SmartPro
VERSION  : 3.14.14 (31 May 2016) unknown
UPSNAME  : Back_UPS_RS550G
CABLE    : USB Cable
DRIVER   : USB UPS Driver
UPSMODE  : Stand Alone
STARTTIME: 2023-10-16 11:18:22 +0300  
MODEL    : Back-UPS RS 550G 
STATUS   : ONLINE 
LINEV    : 225.0 Volts
LOADPCT  : 0.0 Percent
BCHARGE  : 100.0 Percent
TIMELEFT : 497.7 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME  : 0 Seconds
SENSE    : Medium
LOTRANS  : 176.0 Volts
HITRANS  : 282.0 Volts
ALARMDEL : 30 Seconds
BATTV    : 13.7 Volts
LASTXFER : No transfers since turnon
NUMXFERS : 0
TONBATT  : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
SELFTEST : NO
STATFLAG : 0x05000008
SERIALNO : 3B1823X25443  
BATTDATE : 2018-06-07
NOMINV   : 230 Volts
NOMBATTV : 12.0 Volts
NOMPOWER : 330 Watts
FIRMWARE : 857.L7 .I USB FW:L7
END APC  : 2023-10-30 13:07:36 +0300

 

Edited October 31, 2023 by DBP