Милитари Militari Posted January 9 Share Posted January 9 добрый день. Тема еще жива? Поставил сегодня RTorrent. Вебка запустилась. Но ни один тореннт не качается. Ошибка. Подскажите, что смотреть куда копать Quote Link to comment Share on other sites More sharing options...
Милитари Militari Posted January 9 Share Posted January 9 видно вымерли все. или тема умерла. Жаль. Придется возвращаться на трансмишен Он хотя бы качает Quote Link to comment Share on other sites More sharing options...
TheBB Posted January 10 Share Posted January 10 Скрытый текст BusyBox v1.34.1 (2021-12-10 08:29:27 UTC) built-in shell (ash) ~ # ~ # opkg install rtorrent-easy-install Installing rtorrent-easy-install (0.2-5) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rtorrent-easy-install_0.2-5_mipsel-3.4.ipk Installing xmlrpc-c-common (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-common_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c-internal (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-internal_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c-server (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-server_1.51.07-3_mipsel-3.4.ipk Installing rtorrent-rpc (0.9.8-2) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rtorrent-rpc_0.9.8-2_mipsel-3.4.ipk Installing coreutils-stat (8.32-6) to root... Downloading http://bin.entware.net/mipselsf-k3.4/coreutils-stat_8.32-6_mipsel-3.4.ipk Installing coreutils-id (8.32-6) to root... Downloading http://bin.entware.net/mipselsf-k3.4/coreutils-id_8.32-6_mipsel-3.4.ipk Installing gzip (1.11-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/gzip_1.11-1_mipsel-3.4.ipk Installing rutorrent (3.10-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rutorrent_3.10-1_mipsel-3.4.ipk Installing rutorrent-plugin-rpc (3.10-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rutorrent-plugin-rpc_3.10-1_mipsel-3.4.ipk Installing screen (4.8.0-2) to root... Downloading http://bin.entware.net/mipselsf-k3.4/screen_4.8.0-2_mipsel-3.4.ipk Installing lighttpd (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-fastcgi (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-fastcgi_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-scgi (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-scgi_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-auth (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-auth_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-authn_file (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-authn_file_1.4.61-1_mipsel-3.4.ipk Configuring lighttpd. Configuring lighttpd-mod-auth. Configuring lighttpd-mod-authn_file. Configuring xmlrpc-c-common. Configuring xmlrpc-c-internal. Configuring xmlrpc-c. Configuring coreutils-stat. Configuring xmlrpc-c-server. Configuring rtorrent-rpc. Configuring coreutils-id. Configuring gzip. Configuring rutorrent. Configuring rutorrent-plugin-rpc. Configuring screen. Configuring lighttpd-mod-fastcgi. Configuring lighttpd-mod-scgi. Configuring rtorrent-easy-install. #### Welcome to rtorrent easy installation script! We assuming no lighttpd/rtorrent/rutorrent was installed before! Please, answer a few question to configure torrent client. Default aswers given in [brackets], just hit Enter to accept it. Type "username:password" if you want to protect Web UI or hit Enter to leave password protection disabled []: Which port should be used by web interface? [81]: 8888 Enter (maximal) download speed in KB/s [2048]: Enter (maximal) upload speed in KB/s [2048]: Enter folder name on USB drive where torrent content should be stored [/opt/torrents]: Done! You may open 51411-51412 TCP/UDP ports on your router to facilitate uploading/donwloading. It's not necessary but recommended. rutorrent web UI will be available at following URL: http://<ip_address_of_router>:<port>/rutorrent Do you wish to start torrent client? [y]: Starting lighttpd... done. Starting rtorrent... done. ~ # ~ # Quote Link to comment Share on other sites More sharing options...
Милитари Militari Posted January 11 Share Posted January 11 21 час назад, TheBB сказал: Показать содержимое BusyBox v1.34.1 (2021-12-10 08:29:27 UTC) built-in shell (ash) ~ # ~ # opkg install rtorrent-easy-install Installing rtorrent-easy-install (0.2-5) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rtorrent-easy-install_0.2-5_mipsel-3.4.ipk Installing xmlrpc-c-common (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-common_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c-internal (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-internal_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c_1.51.07-3_mipsel-3.4.ipk Installing xmlrpc-c-server (1.51.07-3) to root... Downloading http://bin.entware.net/mipselsf-k3.4/xmlrpc-c-server_1.51.07-3_mipsel-3.4.ipk Installing rtorrent-rpc (0.9.8-2) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rtorrent-rpc_0.9.8-2_mipsel-3.4.ipk Installing coreutils-stat (8.32-6) to root... Downloading http://bin.entware.net/mipselsf-k3.4/coreutils-stat_8.32-6_mipsel-3.4.ipk Installing coreutils-id (8.32-6) to root... Downloading http://bin.entware.net/mipselsf-k3.4/coreutils-id_8.32-6_mipsel-3.4.ipk Installing gzip (1.11-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/gzip_1.11-1_mipsel-3.4.ipk Installing rutorrent (3.10-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rutorrent_3.10-1_mipsel-3.4.ipk Installing rutorrent-plugin-rpc (3.10-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/rutorrent-plugin-rpc_3.10-1_mipsel-3.4.ipk Installing screen (4.8.0-2) to root... Downloading http://bin.entware.net/mipselsf-k3.4/screen_4.8.0-2_mipsel-3.4.ipk Installing lighttpd (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-fastcgi (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-fastcgi_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-scgi (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-scgi_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-auth (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-auth_1.4.61-1_mipsel-3.4.ipk Installing lighttpd-mod-authn_file (1.4.61-1) to root... Downloading http://bin.entware.net/mipselsf-k3.4/lighttpd-mod-authn_file_1.4.61-1_mipsel-3.4.ipk Configuring lighttpd. Configuring lighttpd-mod-auth. Configuring lighttpd-mod-authn_file. Configuring xmlrpc-c-common. Configuring xmlrpc-c-internal. Configuring xmlrpc-c. Configuring coreutils-stat. Configuring xmlrpc-c-server. Configuring rtorrent-rpc. Configuring coreutils-id. Configuring gzip. Configuring rutorrent. Configuring rutorrent-plugin-rpc. Configuring screen. Configuring lighttpd-mod-fastcgi. Configuring lighttpd-mod-scgi. Configuring rtorrent-easy-install. #### Welcome to rtorrent easy installation script! We assuming no lighttpd/rtorrent/rutorrent was installed before! Please, answer a few question to configure torrent client. Default aswers given in [brackets], just hit Enter to accept it. Type "username:password" if you want to protect Web UI or hit Enter to leave password protection disabled []: Which port should be used by web interface? [81]: 8888 Enter (maximal) download speed in KB/s [2048]: Enter (maximal) upload speed in KB/s [2048]: Enter folder name on USB drive where torrent content should be stored [/opt/torrents]: Done! You may open 51411-51412 TCP/UDP ports on your router to facilitate uploading/donwloading. It's not necessary but recommended. rutorrent web UI will be available at following URL: http://<ip_address_of_router>:<port>/rutorrent Do you wish to start torrent client? [y]: Starting lighttpd... done. Starting rtorrent... done. ~ # ~ # Это здорово, что работает. Вот если бы помогли настроить. Устанавливал все по Гайду. Все запускается с первого раза. Ничего редактировать не надо. Единственное что менял в настройках при установке, это скорость закачки и оттачи по умолчанию. При попытке закачать любой торент в веб интерфейсе сообщения Закачка 1 и в разделе Ошибка 1 Quote Link to comment Share on other sites More sharing options...
Jabber Posted April 27 Share Posted April 27 Добрый день, решил обновить пакеты, rtorrent обновился на 0.2-6 и притянул PHP8, a был PHP7 который пришлось удалять руками. Итогом, в WEB интерфейсе ошибка - Bad response from server: (503 [error,getplugins]) Service Unavailable rtorrent и lighttpd запускаются и работают opkg info php8 выводит какой-то конфликт с php7 который удален Package: php8 Version: 8.1.4-1 Depends: libc, libssp, librt, libpthread, libpcre2, zlib, libxml2, zoneinfo-core Conflicts: php7 Status: install ok installed Section: lang Architecture: mipsel-3.4 Size: 2405 Filename: php8_8.1.4-1_mipsel-3.4.ipk Conffiles: /opt/etc/php.ini 93d9e22f3b4bfe0b19be4f508f5a9fa23ab85df3776ca2d65df47691121dfae3 Description: PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains only the PHP config file. You must actually choose your PHP flavour (cli, cgi or fastcgi). Please note, that installing php5 and php8 in parallel on the same target is not supported in OpenWrt/LEDE/Entware. Installed-Time: 165100224 В /opt/var/log/lighttpd/error.log такое 2022-04-27 12:03:20: (../src/gw_backend.c.658) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. If this is PHP, try removing the bytecode caches for now and try again. 2022-04-27 12:03:20: (../src/gw_backend.c.1083) ERROR: spawning gw failed. 2022-04-27 12:03:21: (../src/gw_backend.c.530) connect /tmp/php-fcgi.sock-0: Connection refused 2022-04-27 12:03:22: (../src/gw_backend.c.373) child exited: 2 unix:/tmp/php-fcgi.sock-0 Quote Link to comment Share on other sites More sharing options...
TheBB Posted April 27 Share Posted April 27 49 минут назад, Jabber сказал: притянул PHP8 удалить все пакеты и конфиг "php7" `rm /opt/etc/php.ini*` (пере)установить конфиг "php8" `opkg install php8` создать симлинк "php-fcgi" (https://github.com/openwrt/packages/commit/9aa794c85207a23f19925d4cae428eefc9e6e387#diff-c08cdd3bc140ec4ea23d69933886c0e010b1949193a35057b0f9b0e1eb1fe052L497 vs https://github.com/openwrt/packages/blob/master/lang/php8/Makefile#L512-L513) `ln -sf php8-fcgi /opt/bin/php-fcgi` или ``ln -sf php8-cgi /opt/bin/php-fcgi`` 2 Quote Link to comment Share on other sites More sharing options...
Jabber Posted April 27 Share Posted April 27 (edited) 1 час назад, TheBB сказал: `ln -sf php8-cgi /opt/bin/php-fcgi` Спасибо! Именно этого как раз и не хватало. Ожило. Edited April 27 by Jabber Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.