entware Entware Quickstart

TheBB · March 17, 2018

Attention!

Keenetic provides no official support for third-party packages, such as Entware. If you have questions, comments, or suggestions, feel free to post them here.

Requirements

To start using Entware on Keenetic, you need:

A Keenetic router with a USB port (except Keenetic 4G) running NDMS 2.07 or higher
Either "File and printer sharing (SMB/CIFS protocols)", or "FTP server" component installed
The "Open Package support" component installed
A USB disk with an ext2/ext3/ext4 partition

Important: Keenetic should be connected to the Internet.

Installation instructions

Connect your USB storage to Keenetic
Share the ext2/ext3/ext4 partition via FTP or SMB/CIFS
Create the "install" directory
Copy the following archive to the "install" directory: EN_mipsel-installer.tar.gz ; for KN-2011 and KN-2111 - EN_mips-installer.tar.gz; for KN-2710 - EN_aarch64-installer.tar.gz
Go to the Keenetic web interface: "Applications » OPKG", check "Enable", select the USB drive, and click "Apply"

Wait for the following message in the system log:

"... installer: [5/5] Entware installed!"

...
[I] Mar 17 14:47:57 ndm: Opkg::Manager: disk is set to: 13af943c-7374-46f1-9256-f2cc76c2ff1a:
[I] Mar 17 14:47:58 ndm: kernel: EXT4-fs (sdd1): re-mounted. Opts: (null)
[I] Mar 17 14:47:58 ndm: Opkg::Manager: /tmp/mnt/E-3x_test mounted to /tmp/mnt/E-3x_test.
[I] Mar 17 14:47:58 ndm: Opkg::Manager: /tmp/mnt/E-3x_test mounted to /opt/.
[I] Mar 17 14:47:58 npkg: inflating "EN_mipsel-installer(1).tar.gz".
[I] Mar 17 14:47:59 ndm: Opkg::Manager: /tmp/mnt/E-3x_test initialized.
[I] Mar 17 14:47:59 ndm: Opkg::Manager: init script reset to default: /opt/etc/initrc.
[E] Mar 17 14:47:59 ndm: Opkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/.
[I] Mar 17 14:47:59 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Partition is OK.
[I] Mar 17 14:47:59 ndm: Core::ConfigurationSaver: saving configuration...
[I] Mar 17 11:47:59 installer: [1/5] Starting Entware deployment...
[I] Mar 17 11:47:59 installer: [2/5] Basic packages installation...
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/Packages.gz.
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updated list of available packages in /opt/var/opkg-lists/entware.
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.gz.
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updated list of available packages in /opt/var/opkg-lists/keendev.
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing opt-ndmsv2 (1.0-10a) to root...
[I] Mar 17 14:48:01 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/opt-ndmsv2_1.0-10a_mipsel-3.4_kn.ipk.
[I] Mar 17 14:48:03 ndm: Core::ConfigurationSaver: configuration saved.
[I] Mar 17 14:48:03 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libc (2.27-8) to root...
[I] Mar 17 14:48:03 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libc_2.27-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libgcc (7.3.0-8) to root...
[I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libgcc_7.3.0-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libssp (7.3.0-8) to root...
[I] Mar 17 14:48:08 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libssp_7.3.0-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing librt (2.27-8) to root...
[I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/librt_2.27-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libpthread (2.27-8) to root...
[I] Mar 17 14:48:09 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libpthread_2.27-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:10 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libstdcpp (7.3.0-8) to root...
[I] Mar 17 14:48:10 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libstdcpp_7.3.0-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:12 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing ldconfig (2.27-8) to root...
[I] Mar 17 14:48:12 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/ldconfig_2.27-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing findutils (4.6.0-1) to root...
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/findutils_4.6.0-1_mipsel-3.4.ipk.
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing terminfo (6.1-1) to root...
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/terminfo_6.1-1_mipsel-3.4.ipk.
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing ndmq (1.0.2-3) to root...
[I] Mar 17 14:48:14 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/ndmq_1.0.2-3_mipsel-3.4_kn.ipk.
[I] Mar 17 14:48:15 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libndm (1.8.0-1) to root...
[I] Mar 17 14:48:15 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/libndm_1.8.0-1_mipsel-3.4_kn.ipk.
[I] Mar 17 14:48:16 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing locales (2.27-8) to root...
[I] Mar 17 14:48:16 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/locales_2.27-8_mipsel-3.4.ipk.
[I] Mar 17 14:48:18 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing grep (2.26-1) to root...
[I] Mar 17 14:48:18 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/grep_2.26-1_mipsel-3.4.ipk.
[I] Mar 17 14:48:19 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing libpcre (8.41-2) to root...
[I] Mar 17 14:48:19 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/libpcre_8.41-2_mipsel-3.4.ipk.
[I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing zoneinfo-asia (2018c-1) to root...
[I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-asia_2018c-1_mipsel-3.4.ipk.
[I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing zoneinfo-europe (2018c-1) to root...
[I] Mar 17 14:48:20 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/zoneinfo-europe_2018c-1_mipsel-3.4.ipk.
[I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing entware-release (1.0-2) to root...
[I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/entware-release_1.0-2_all.ipk.
[I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing opkg (2011-04-08-9c97d5ec-17b) to root...
[I] Mar 17 14:48:21 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/opkg_2011-04-08-9c97d5ec-17b_mipsel-3.4.ipk.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Installing dropbear (2017.75-5) to root...
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Downloading http://bin.entware.net/mipselsf-k3.4/dropbear_2017.75-5_mipsel-3.4.ipk.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Entware uses separate locale-archive file independent from main system.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: You can download locale sources from http://pkg.entware.net/sources/i18n_glib227.tar.gz.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: You can add new locales to Entware using /opt/bin/localedef.new.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Updating /opt/etc/ld.so.cache... done.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Package ndmq (1.0.2-3) installed in root is up to date.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libgcc.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libc.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libssp.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libpthread.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring librt.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring terminfo.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring ldconfig.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libpcre.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring grep.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring locales.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring opkg.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring zoneinfo-europe.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring zoneinfo-asia.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libndm.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring ndmq.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring dropbear.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring libstdcpp.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring findutils.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring entware-release.
[I] Mar 17 14:48:22 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Configuring opt-ndmsv2.
[I] Mar 17 11:48:34 installer: Info: Packages installed...
[I] Mar 17 11:48:34 installer: [3/5] Generating SSH keys...
[I] Mar 17 14:48:34 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: Generating key, this may take a while...
[I] Mar 17 14:48:36 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: .Generating key, this may take a while...
[I] Mar 17 11:48:38 installer: [4/5] Setting timezone, script initrc and starting dropbear...
[I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket.
[I] Mar 17 14:48:38 ndm: Core::Server: client disconnected.
[I] Mar 17 11:48:38 dropbear[20781]: Running in background
[I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket.
[I] Mar 17 14:48:38 ndm: Opkg::Manager: configured init script: "/opt/etc/init.d/rc.unslung".
[I] Mar 17 14:48:38 ndm: Core::Server: client disconnected.
[I] Mar 17 14:48:38 ndm: Core::Server: started Session /var/run/ndm.core.socket.
[I] Mar 17 14:48:38 ndm: Core::ConfigurationSaver: saving configuration...
[I] Mar 17 14:48:38 ndm: Core::Server: client disconnected.
[I] Mar 17 11:48:38 installer: [5/5] Entware installed!
[I] Mar 17 11:48:38 installer: Log on at root:keenetic@my.keenetic.net -p 222 to start new SSH session.
[I] Mar 17 14:48:38 ndm: Opkg::Manager: /opt/etc/init.d/doinstall: .
[I] Mar 17 14:48:42 ndm: Core::ConfigurationSaver: configuration saved.
...

Further steps

Connect to the Keenetic by SSH (login/password: root/keenetic) (if installed component "SSH server", connect to the port 222)

Update package list

opkg update

For example, install midnight commander

opkg install mc

You can find the list of basic packages here and additional packages for Keenetic here

Edited December 21, 2021 by TheBB
add KN-2710

Gürkan Gülmez · January 20, 2020

on kn-2111,

i trying "EN_mipsel-installer.tar.gz" install getting "error cannot execute binary file: Exec format error."

any advice are welcome.

TheBB · January 20, 2020

Your device with CPU on MIPS (Big Endian) architectures, so You must use the mipssf-k3.4 repository only. Installer for Your device is here (in Russian), in English will be later.

Gürkan Gülmez · January 20, 2020

Hello i found attached file. Is it compitable?

mips-installer.tar.gz

TheBB · January 20, 2020

Yes, it is (or the installer in English for your device)

progrmlayan · January 7, 2021

Hello,

I installed zerotier opkg package, worked perfectly,

but it could not start autoatically (as service) after restart.

How can I write "zerotier-one -p9993 &" line startup (like rc.local or service)

thank you.

TheBB · January 7, 2021

create a startup script, e.g.:

cat > /opt/etc/init.d/S90zerotier <<EOF
#!/bin/sh

ENABLED=yes
PROCS=zerotier-one
ARGS="-d"
PREARGS=""
DESC=$PROCS
PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

. /opt/etc/init.d/rc.func

EOF

and make it executable

chmod +x /opt/etc/init.d/S90zerotier

~ # /opt/etc/init.d/S90zerotier start
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              alive. 
~ # /opt/etc/init.d/S90zerotier stop
 Checking zerotier-one...              alive. 
 Shutting down zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              dead. 
~ # /opt/etc/init.d/S90zerotier start
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier restart
 Shutting down zerotier-one...              done. 
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              alive. 
~ #

progrmlayan · January 8, 2021

Thank you it worked!

sky-ev · April 12, 2021

Доброго дня! установил Entwere но по ssh не могу подключится - пишет не верный пароль! ПЛИЗ ХЕЛП МИ

zyxmon · April 12, 2021

59 минут назад, sky-ev сказал:

ПЛИЗ ХЕЛП МИ

ПЛИЗ ЮЗ THE RUSSIAN SECTION OF THIS FORUM.

Для переключения языка используйте выпадающий список внизу экрана.

KYTECHNGAMING · September 24, 2021

On 1/7/2021 at 1:56 PM, TheBB said:

create a startup script, e.g.:

cat > /opt/etc/init.d/S90zerotier <<EOF
#!/bin/sh

ENABLED=yes
PROCS=zerotier-one
ARGS="-d"
PREARGS=""
DESC=$PROCS
PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

. /opt/etc/init.d/rc.func

EOF

and make it executable

chmod +x /opt/etc/init.d/S90zerotier

~ # /opt/etc/init.d/S90zerotier start
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              alive. 
~ # /opt/etc/init.d/S90zerotier stop
 Checking zerotier-one...              alive. 
 Shutting down zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              dead. 
~ # /opt/etc/init.d/S90zerotier start
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier restart
 Shutting down zerotier-one...              done. 
 Starting zerotier-one...              done. 
~ # /opt/etc/init.d/S90zerotier check
 Checking zerotier-one...              alive. 
~ #

Hello,

How to make this script for pyhton application?

Vitaliy's grafana monitoring works perfectly, if Keenetic is collector. He shared a script included nohup (background execute) but it does not start at boot. need to manually execute;

python /opt/home/keenetic-grafana-monitoring/keentic_influxdb_exporter.py

Vitaliy's script

#!/bin/sh

[ "$1" != "start" ] && exit 0

nohup python /opt/home/keenetic-grafana-monitoring/keentic_influxdb_exporter.py >/dev/null 2>&1 &

TheBB · September 25, 2021

is coreutils-nohup installed?

Alem · May 15, 2022

Hi.Which file support to Peak Dsl 2510??

KYTECHNGAMING · May 15, 2022

34 minutes ago, Alem said:

Hi.Which file support to Peak Dsl 2510??

mips

Alem · May 16, 2022

13 hours ago, KYTECHNGAMING said:

mips

Thanks for answer. Didnt work.What could be the matter?

Log is there:

Opkg::Manager: /tmp/mnt/E866-9560 mounted to /tmp/mnt/E866-9560.
May 16 12:04:23 ndm
Opkg::Manager: /tmp/mnt/E866-9560 mounted to /opt/.
May 16 12:04:23 npkg
inflating "EN_mips-installer.tar.gz".
May 16 12:04:23 npkg
failed to inflate "EN_mips-installer.tar.gz": bin/renice: operation not permitted.
May 16 12:04:23 ndm
Opkg::Manager: system failed [0xcffd0238], exit code 147.
May 16 12:04:23 ndm
Opkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/.
May 16 12:04:27 ndm
Core::System::Configuration: configuration saved.
May 16 12:04:32 coalagent
updating configuration...

KYTECHNGAMING · May 16, 2022

54 minutes ago, Alem said:

Thanks for answer. Didnt work.What could be the matter?

Log is there:

Opkg::Manager: /tmp/mnt/E866-9560 mounted to /tmp/mnt/E866-9560.
May 16 12:04:23 ndm
Opkg::Manager: /tmp/mnt/E866-9560 mounted to /opt/.
May 16 12:04:23 npkg
inflating "EN_mips-installer.tar.gz".
May 16 12:04:23 npkg
failed to inflate "EN_mips-installer.tar.gz": bin/renice: operation not permitted.
May 16 12:04:23 ndm
Opkg::Manager: system failed [0xcffd0238], exit code 147.
May 16 12:04:23 ndm
Opkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/.
May 16 12:04:27 ndm
Core::System::Configuration: configuration saved.
May 16 12:04:32 coalagent
updating configuration...

Follow these guides.

Installing the Entware repository package system on a USB drive

https://help.keenetic.com/hc/en-us/articles/360021214160

Installing OPKG Entware in the router's internal memory

https://help.keenetic.com/hc/en-us/articles/360021888880

Alem · May 16, 2022

50 minutes ago, KYTECHNGAMING said:

Follow these guides.

Installing OPKG Entware in the router's internal memory

https://help.keenetic.com/hc/en-us/articles/360021888880

Thanks.This way is working.

KYTECHNGAMING · May 16, 2022

Just now, Alem said:

Thanks.This way is working.

Yes, it is preferable.
I also prefer this method. More minimal and sufficient.

Alem · May 16, 2022

root password is "keenetic" not work.what could it be?

KYTECHNGAMING · May 16, 2022

1 hour ago, Alem said:

root password is "keenetic" not work.what could it be?

Just " keenetic "

It cannot be any other password. You can change it after logging in if you want.

guney guney · April 12, 2023

Hello. Can we plug a USB sound card into a Viva model router and listen to music with a speaker? open wrt can do that. As far as I know, opkg can be installed on viva. but despite following the steps shown on the open wrt site, I couldn't get it to run due to some missing packages. Can you help me on this issue?

zyxmon · April 12, 2023

@guney guney - you need to add USB Audio kernel modules on General Settings -> Components Confihuration page.

In case your usb audio is supported by these components you will need to

1. install (lsmod) kernel modules

2. install Entware package with audio player and try if this will work.

guney guney · April 14, 2023

On 4/12/2023 at 1:28 PM, zyxmon said:

1. install (lsmod) kernel modules

Hi Zyxmon. Thanks for answer.

Can you give some more details? For example, where can I get the (lsmod) kernel module and install it? Another problem I have is that I am trying to do the installation steps specified on the web page of the ympd player via ssh, but the installation does not happen. Since I am a basic user, I guess I don't know some important tricks.

zyxmon · April 14, 2023

2 часа назад, guney guney сказал:

where can I get the (lsmod) kernel module and install it?

https://help.keenetic.com/hc/en-us/articles/360000358039-KeeneticOS-components-installation-removal

bbaslican · July 18, 2023

is there any way to format usb disk and re install opkg and entware remotely ?

Александр Рыжов · July 18, 2023

19 минут назад, bbaslican сказал:

is there any way to format usb disk and re install opkg and entware remotely ?

Nope:( Unless you've got two partitions for Entware deployment and ability to switch between them.

bbaslican · July 18, 2023

I got this log when i m trying to install to internal memeory.

Core::FileSystem::Repository: "storage:" mounted.

Tem 18 09:26:25

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:26:25

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:26:32

ndm

Core::FileSystem::Repository: "storage:/install" created.

Tem 18 09:26:59

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:26:59

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:00

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:27:00

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:01

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:27:01

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:03

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:27:03

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:03

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:27:03

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:04

ndm

Core::FileSystem::Native: can not get "/tmp/mnt/dec32af9-bf97-4a52-9c8e-acb58a131dce" filesystem statistics: no such file or directory.

Tem 18 09:27:04

ndm

Storage::Partition: system failed [0xcffd0402], unable to get a partition size.

Tem 18 09:27:11

ndm

Opkg::Manager: disk is set to: storage:/.

Tem 18 09:27:11

ndm

Opkg::Manager: init script reset to default: /opt/etc/initrc.

Tem 18 09:27:11

ndm

Core::System::StartupConfig: saving (http/rci).

Tem 18 09:27:11

ndm

Opkg::Manager: /storage mounted to /storage.

Tem 18 09:27:11

ndm

Opkg::Manager: /storage mounted to /opt/.

Tem 18 09:27:11

ndm

Opkg::Manager: none mounted to /opt/proc/.

Tem 18 09:27:11

ndm

Opkg::Manager: none mounted to /opt/sys/.

Tem 18 09:27:11

ndm

Opkg::Manager: /dev mounted to /opt/dev/.

Tem 18 09:27:11

ndm

Opkg::Manager: /tmp mounted to /opt/tmp.

Tem 18 09:27:11

ndm

Opkg::Manager: none mounted to /opt/dev/pts/.

Tem 18 09:27:11

ndm

Opkg::Manager: system failed [0xcffd0393].

Tem 18 09:27:11

ndm

Opkg::Manager: system failed [0xcffd0399].

Tem 18 09:27:11

ndm

Io::File: unable to open "/etc/shells": no such file or directory.

Tem 18 09:27:11

ndm

Io::File: unable to open "/opt/etc/shells": no such file or directory.

Tem 18 09:27:11

ndm

Opkg::Manager: system failed [0xcffd03a5], unable to copy /etc/shells -> /opt/etc/shells.

Tem 18 09:27:11

ndm

Io::File: unable to open "/etc/profile": no such file or directory.

Tem 18 09:27:11

ndm

Io::File: unable to open "/opt/etc/profile": no such file or directory.

Tem 18 09:27:11

ndm

Opkg::Manager: system failed [0xcffd03ad], unable to copy /etc/profile -> /opt/etc/profile.

Tem 18 09:27:12

npkg

inflating "EN_mipsel-installer.tar.gz".

Tem 18 09:27:18

ndm

Opkg::Manager: /storage initialized.

Tem 18 09:27:18

ndm

Opkg::Manager: invalid initrc "/opt/etc/initrc": no such file or directory, trying /opt/etc/init.d/.

Tem 18 09:27:18

ndm

Process: system failed [0xcffd0ae2], "/opt/bin/sh" executable not found.

Tem 18 09:27:18

ndm

Process: unable to create and initialize "Opkg shell" process.

Tem 18 09:27:18

ndm

Io::Process: "Opkg shell" is broken.

Tem 18 09:27:18

ndm

Opkg::Manager: process /opt/etc/init.d/doinstall: failed to start.

Tem 18 09:27:18

ndm

Core::System::StartupConfig: configuration saved.

Edited July 18, 2023 by bbaslican

Sign In

entware Entware Quickstart

Recommended Posts

TheBB

Gürkan Gülmez

TheBB

Gürkan Gülmez

TheBB

progrmlayan

TheBB

progrmlayan

sky-ev

zyxmon

KYTECHNGAMING

TheBB

Alem

KYTECHNGAMING

Alem

KYTECHNGAMING

Installing the Entware repository package system on a USB drive

Installing OPKG Entware in the router's internal memory

Alem

Installing OPKG Entware in the router's internal memory

KYTECHNGAMING

Alem

KYTECHNGAMING

guney guney

zyxmon

guney guney

zyxmon

bbaslican

Александр Рыжов

bbaslican

Join the conversation

Recently Browsing 0 members

Browse

Activity

Store

My Details