Jump to content
Как правильно добавить self-test и прочую отладку в тему
Где взять тестовые сборки
  • 0

VPN на Zyxel keenetic giga

sabsem

Asked by sabsem,

 Share

Question

sabsem Newbie

sabsem

Posted
Posted

установил на Zyxel keenetic giga  прошивку v2.04(USD.9)C7 с  установленным VPN

подключиться не получается с Windows 10

Jul 18 22:22:03pptpd[335]
CTRL: Client 176.121.139.150 control connection started
Jul 18 22:22:03ndm
kernel: fast vpn ctrl: 968b79b0, 1
Jul 18 22:22:03pptpd[335]
CTRL: Starting call (launching pppd, opening GRE)
Jul 18 22:22:03pptp[336]
Plugin pptp.so loaded.
Jul 18 22:22:03pptp[336]
PPTP plugin version 0.8.3 compiled against pppd 2.4.4
Jul 18 22:22:03pptp[336]
pppd 2.4.4 started by root, uid 0
Jul 18 22:22:03pptp[336]
Using interface vpn2
Jul 18 22:22:03pptp[336]
Connect: vpn2 <--> pptp (176.121.139.150)
Jul 18 22:22:34pptp[336]
LCP: timeout sending Config-Requests
Jul 18 22:22:34pptp[336]
Connection terminated.
Jul 18 22:22:34ndm
kernel: fast vpn ctrl: 968b79b0, 0
Jul 18 22:22:34pptp[336]
Modem hangup
Jul 18 22:22:34pptp[336]
Exit.
Jul 18 22:22:34pptpd[335]
CTRL: Reaping child PPP[336]
Jul 18 22:22:34pptpd[335]
CTRL: Client pppd TERM sending
Jul 18 22:22:34pptpd[335]
CTRL: Client pppd finish wait
Jul 18 22:22:34pptpd[335]
CTRL: Client 176.121.139.150 control connection finished
Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0
Le ecureuil Honored Flooder

Le ecureuil

Posted
Posted
29 минут назад, sabsem сказал:

установил на Zyxel keenetic giga  прошивку v2.04(USD.9)C7 с  установленным VPN

подключиться не получается с Windows 10

Jul 18 22:22:03pptpd[335]
CTRL: Client 176.121.139.150 control connection started
Jul 18 22:22:03ndm
kernel: fast vpn ctrl: 968b79b0, 1
Jul 18 22:22:03pptpd[335]
CTRL: Starting call (launching pppd, opening GRE)
Jul 18 22:22:03pptp[336]
Plugin pptp.so loaded.
Jul 18 22:22:03pptp[336]
PPTP plugin version 0.8.3 compiled against pppd 2.4.4
Jul 18 22:22:03pptp[336]
pppd 2.4.4 started by root, uid 0
Jul 18 22:22:03pptp[336]
Using interface vpn2
Jul 18 22:22:03pptp[336]
Connect: vpn2 <--> pptp (176.121.139.150)
Jul 18 22:22:34pptp[336]
LCP: timeout sending Config-Requests
Jul 18 22:22:34pptp[336]
Connection terminated.
Jul 18 22:22:34ndm
kernel: fast vpn ctrl: 968b79b0, 0
Jul 18 22:22:34pptp[336]
Modem hangup
Jul 18 22:22:34pptp[336]
Exit.
Jul 18 22:22:34pptpd[335]
CTRL: Reaping child PPP[336]
Jul 18 22:22:34pptpd[335]
CTRL: Client pppd TERM sending
Jul 18 22:22:34pptpd[335]
CTRL: Client pppd finish wait
Jul 18 22:22:34pptpd[335]
CTRL: Client 176.121.139.150 control connection finished

Настройки VPN в Windows какие? Насколько отличаются от стандартного PPTP?

Link to comment
Share on other sites
  • 0
sabsem Newbie

sabsem

Posted
  • Author
Posted

все стандартно, пробовал через Keenetic GIGA 2 подключиться та же ошибка

Jul 18 23:19:54ndm
Network::Interface::Base: "PPTP0": interface is up.
Jul 18 23:19:54ndm
Network::Interface::IP: "PPTP0": global priority is 1000.
Jul 18 23:19:54ndm
Network::Interface::Base: "PPTP0": description saved.
Jul 18 23:19:54ndm
Network::Interface::PPP: "PPTP0": enabled connection via any interface.
Jul 18 23:19:54ndm
Network::Interface::Secure: authnentication is unchanged.
Jul 18 23:19:54ndm
Dns::InterfaceSpecific: static name server list cleared on PPTP0.
Jul 18 23:19:54ndm
Network::Interface::Secure: identity is unchanged.
Jul 18 23:19:54ndm
Dhcp::Client: stopped DHCP client on PPTP0.
Jul 18 23:19:54ndm
Network::Interface::IP: "PPTP0": IP address cleared.
Jul 18 23:19:56pptp[1854]
Plugin pptp.so loaded.
Jul 18 23:19:56pptp[1854]
PPTP plugin version 0.8.3 compiled against pppd 2.4.4-4
Jul 18 23:19:56pptp[1854]
pppd 2.4.4-4 started by root, uid 0
Jul 18 23:19:56ndm
Network::Interface::PPTP: "PPTP0": added host route to 109.195.243.237 via 10.2.172.1.
Jul 18 23:19:56pptp[1856]
IP: 109.195.243.237
Jul 18 23:19:56pptp[1856]
control connection
Jul 18 23:19:56pptp[1856]
unix_sock
Jul 18 23:19:56pptp[1857]
enable echo requests (30:3)
Jul 18 23:19:56pptp[1857]
Sent control packet type is 1 'Start-Control-Connection-Request'
Jul 18 23:19:56pptp[1857]
Received Start Control Connection Reply
Jul 18 23:19:56pptp[1857]
Client connection established.
Jul 18 23:19:57pptp[1857]
Sent control packet type is 7 'Outgoing-Call-Request'
Jul 18 23:19:57pptp[1857]
Received Outgoing Call Reply.
Jul 18 23:19:57pptp[1857]
Outgoing call established (call ID 64, peer's call ID 75).
Jul 18 23:19:57ndm
kernel: Fast VPN ctrl: setup for src 109.195.243.237
Jul 18 23:19:57pptp[1854]
Using interface ppp0
Jul 18 23:19:57pptp[1854]
Connect: ppp0 <--> pptp (109.195.243.237)
Jul 18 23:20:27ndm
kernel: Fast VPN ctrl: release for src 109.195.243.237
Jul 18 23:20:27pptp[1854]
LCP: timeout sending Config-Requests
Jul 18 23:20:27pptp[1854]
Connection terminated.
Jul 18 23:20:27pptp[1857]
Closing connection (unhandled)
Jul 18 23:20:27pptp[1857]
Sent control packet type is 12 'Call-Clear-Request'
Jul 18 23:20:27pptp[1857]
Closing connection (call state)
Jul 18 23:20:27pptp[1854]
Modem hangup
Jul 18 23:20:27pptp[1854]
Exit.
Jul 18 23:20:27ndm
Service: "PPTP0": unexpectedly stopped.
Link to comment
Share on other sites
  • 0
sabsem Newbie

sabsem

Posted
  • Author
Posted
В 18.07.2016 в 23:34, Le ecureuil сказал:

Завтра попробуем воспроизвести, но, кажется, что это связано с вашим окружением - пока это единственная такая жалоба.

есть ли какие-то результаты тестирования

Link to comment
Share on other sites
  • 0
manslife Newbie

manslife

Posted
Posted (edited)
Модель Keenetic Ultra
Сервисный код 471-143-254-077-088
Версия NDMS v2.08(AAGJ.3)A8

Аналогично в бесконечность VPN через встроенный клиент

Oct 16 23:09:57ndm
Service: "PPTP0": unexpectedly stopped.
Oct 16 23:09:57ndm
Network::Interface::Base: "PPTP0": interface is up.
Oct 16 23:10:00pptp[29050]
Plugin pptp.so loaded.
Oct 16 23:10:00pptp[29050]
PPTP plugin version 0.8.3 compiled against pppd 2.4.4-4
Oct 16 23:10:00pptp[29050]
pppd 2.4.4-4 started by root, uid 0
Oct 16 23:10:00ndm
Network::Interface::PPTP: "PPTP0": added host route to x.x.x.x via 172.25.20.1.
Oct 16 23:10:00pptp[29052]
IP: x.x.x.x
Oct 16 23:10:00pptp[29052]
control connection
Oct 16 23:10:00pptp[29052]
unix_sock
Oct 16 23:10:00pptp[29053]
enable echo requests (30:3)
Oct 16 23:10:00pptp[29053]
Sent control packet type is 1 'Start-Control-Connection-Request'
Oct 16 23:10:00pptp[29053]
Received Start Control Connection Reply
Oct 16 23:10:00pptp[29053]
Client connection established.
Oct 16 23:10:01pptp[29053]
Sent control packet type is 7 'Outgoing-Call-Request'
Oct 16 23:10:01pptp[29053]
Received Outgoing Call Reply.
Oct 16 23:10:01pptp[29053]
Outgoing call established (call ID 1089, peer's call ID 65002).
Oct 16 23:10:01ndm
kernel: Fast VPN ctrl: setup for src x.x.x.x
Oct 16 23:10:01pptp[29050]
Using interface ppp0
Oct 16 23:10:01pptp[29050]
Connect: ppp0 <--> pptp (x.x.x.x)
Oct 16 23:10:28pptp[29053]
Call disconnect notification received (call id 65002)
Oct 16 23:10:30pptp[29053]
Echo Request received.
Oct 16 23:10:30pptp[29053]
Sent control packet type is 6 'Echo-Reply'
Oct 16 23:10:31ndm
kernel: Fast VPN ctrl: release for src x.x.x.x
Oct 16 23:10:31pptp[29050]
LCP: timeout sending Config-Requests
Oct 16 23:10:31pptp[29050]
Connection terminated.
Oct 16 23:10:31pptp[29053]
Closing connection (unhandled)
Oct 16 23:10:31pptp[29053]
Sent control packet type is 12 'Call-Clear-Request'
Oct 16 23:10:31pptp[29053]
Closing connection (call state)
Oct 16 23:10:31pptp[29050]
Modem hangup
Oct 16 23:10:31pptp[29050]
Exit.
Oct 16 23:10:31ndm
Service: "PPTP0": unexpectedly stopped.
Edited by manslife
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...