-
Posts
710 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Everything posted by KYTECHNGAMING
-
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
it is the gparted image after the situation in my message above while the disk is working. How can the partition be corrupted? The disk with exfat file system attached to peak DSL, which I use in the same way, has been working smoothly for more than 1 week. 🙄 -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
According to these outputs, which one is the problem and the partition is lost. - disk (I tried a different disk this time) - writing syslog to disk - usb hub (but it still works for other usb opkg in the same hub.) - partitions (had the same issue with ext3 and ext4) @Le ecureuil -
WAN Port as a Lan Port, So SFP?
KYTECHNGAMING posted a question in Community Support & Knowledge Exchange
As an article this command make wan to lan in router mode. Is SFP port inclueded? https://help.keenetic.com/hc/en-us/articles/115005486085-Setting-up-the-WAN-port-as-a-LAN-port-in-KN-2610-KN-1810-KN-1010-KN-1910-and-KN-3010 I know SFP-Gigabit combo port. But SFP id is GigabitEthernet1/0. Since I don't have a router with an sfp port at the moment, I couldn't test it and be sure. interface Bridge0 include GigabitEthernet1 Does gigabit ethernet cover all? All for ISP 🙄 For example; "ISP": { "id": "GigabitEthernet1", "index": 1, "type": "GigabitEthernet", "description": "Broadband connection", "interface-name": "ISP", "port": { "id": "GigabitEthernet1/0", "index": 0, "interface-name": "0", "type": "Port", "link": "up", "auto-negotiation": "on", "speed": "100", "duplex": "full", "flow-control": "off", "transceiver": "internal", "sfp-combo": true "ISP-Vlan": { "id": "GigabitEthernet1/Vlan107", "index": 107, "type": "Vlan", "description": "Metronet TTNET", "interface-name": "ISP-Vlan", An another article said yes it is. https://help.keenetic.com/hc/en-us/articles/360000893880-Internet-connection-via-an-optical-fiber-link-SFP-module- So, can the SFP port connect to the mesh in AP mode? No need to even enter this command, right? As a result, in AP mode, all ports turn into Lan ports. Can I include it in the mesh with fiber or ethernet cable with my sfp module? I wrote this topic because I am very curious about the answer. thanks. -
DOH3 / QUIC is possible?
KYTECHNGAMING replied to KYTECHNGAMING's question in Community Support & Knowledge Exchange
Thanks for answer. I prefer built-in solutions. I believe nextdns will be integrated into KeeneticOs. 🙏 -
Do kernel.warning messages indicate a serious problem? I've been seeing it in syslog for a long time. Device: Keenetic Peak DSL KN-2510 / OS: KeeneticOS 3.6.10 Stable Date Time Priority Hostname Message 09-19-2021 09:07:31 Kernel.Warning HIDE Sep 19 09:07:37 192.168.1.1 kernel: ra = 77880138 in libc.so[77850000+d2000] 09-19-2021 09:07:31 Kernel.Warning HIDE Sep 19 09:07:37 192.168.1.1 kernel: epc = 7787fb8c in libc.so[77850000+d2000] 09-19-2021 09:07:31 Kernel.Warning HIDE Sep 19 09:07:37 192.168.1.1 kernel: do_page_fault(): sending SIGSEGV to ntce_sink for invalid read access from 00000008
-
Thanks for information. When you said it, I thought it wasn't necessary to do any further research and experimentation. There are some solutions but it is not stable. Vpn over vpn or virtual machine I will try to print syslog to my remote address without vpn connected. That way I won't run into this problem.
-
Trying to change DOH to DOH3 Nextdns in internet safety. Dns-proxy is no respond to address so my internet access is lost. Is there any progress for QUIC?
-
What should I do to simultaneously connect 2 computers from the same home network to the remote Keenetic? A netbook is always connected from L2TP to save the syslog. In my research, some people say that this is not possible theoretically, and some people have a software-related deficiency. I am not sure. I tried both the settings in the Keenetic interface and the connection settings on the computer, but I could not connect at the same time.
-
How can I check faulty of FTP socket error? I dont know what is trigger this syptom on both remote and local FTP. I got the same error on my hero dsl and peak dsl. Error still exists on Hero dsl, but I can connect to ftp on my peak dsl again. it fixed itself. Hero DSL 3.7.B.2 Peak DSL 3.6.10
-
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Partition gone at 2:30AM -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
and the whole disk appears on linux. What is mean lock? Who locked? -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Interestingly, the partition of the same disk that I only used to write syslog was gone. Last night, there was 100% cpu and ram usage due to torrent and syslog was continuing to write. When I woke up in the morning, I saw that the partition (called Data) of the disk was gone again. Swap is still there. I'll also try replacing the disk. -
Other Conenctions or Unknown Connections
KYTECHNGAMING replied to KYTECHNGAMING's question in Issues & test reports
wow nice update. I like it! -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
The same disk formatted as ext4 is no longer lost. I think it's a bug for ext3. Only syslog is written to this disk. -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Hello Community, As a result of 3-4 days of testing and as I have experienced before, the partition on a usb disappears. When I look at the disk with live linux, I can see all partitions. When I plug it back into Keenetic it only sees the Linux Swap partition. FileSystem::Directory: system failed [0xcffd00ec], unable to remove "/tmp/mnt/f4d5d7a6-860a-483b-8890-2102af3d31d0": device or resource busy. Likewise, I saw a warning yesterday when we unmounted and re-mounted the disk of my friend. After restarting the router, the disc mounted successfully. -
Multipath and NetFlow Relationship !
KYTECHNGAMING replied to KYTECHNGAMING's question in Community Support & Knowledge Exchange
in addition, multipath is working normal on wifi devices while netflow is active. is this also interesting? -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
For best result about partitioning Parted Magic is really magic. Highly recommended if you haven't tried it. It is flawless with virtual machine in Windows environment. -
Multipath and NetFlow Relationship !
KYTECHNGAMING posted a question in Community Support & Knowledge Exchange
Is it normal for netflow to have negative effect on multipath application? I've been trying everything since morning, suspecting the cables. because even if multipath works, it uses half the bandwidth of 2 lines in total. So i thought the cables were getting stale. Even though I saw a 1gbit lan connection, I was getting a maximum speed of 100-120mbit. 50/100 mbit/s for 1st line 50/100 mbit/s for 2. line at maximum. I removed the netflow entries as a last try. I got full efficiency from 2 wan connections again. no ip flow-export destination no interface DSL ip flow no interface ISP ip flow system configuration save I read somewhere that netflow affects hardware and software accelerators. Is it true? -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Interesting thing is that how to MiniTool format usb bad. Paragon Hard Disk Manager is better than MiniTool. -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
I am not using Linux. So I try Paragon Hard Disk Manager. I will let you know the result. -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Yeps. Ok master. I am thinking of same. Next step. -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
Same USB Different USB show media show usb -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
I am formatting ext3 again. I wanted to try ext3 because my friend who use Keenetic, he said me that "yes, ext3 was not recognized so I use ext4" -
Ext3 is not recognizing
KYTECHNGAMING replied to KYTECHNGAMING's question in Dev channel issues & test reports
I will. But this usb was formatted as new ext3 with Minitool Partition Wizard.