Jump to content

slomblobov

Forum Members
 View Profile  See their activity

  • Posts

    1421

  • Joined

  • Last visited

  • Days Won

    52

 Content Type 

Everything posted by slomblobov

  1. slomblobov
    @kedimi7 Ok, I have enough information for a while. After a small modification of the code, the modem will go into the desired mode. I will provide you with the modified firmware for testing...
  2. slomblobov
    @kedimi7 could you share a selftest file?
  3. slomblobov
    You have provided very little information, maybe it would be better to contact technical support, they will help you.
  4. slomblobov
    @Vadym Volodin This issue is quite similar with NDM-3198, which is fixed in 4.1.C.4 or above. I recommend you to update the firmware.
  5. slomblobov
    @Vadym Volodin Please share a self-test file.
  6. slomblobov
    @Aazamandius please provide a self-test file.
  7. slomblobov
    Dear Alasedo, Thank you for your feedback. We sincerely apologize for any inconvenience caused by the new web interface. In version 4.1, we will be introducing a choice of interfaces, which we hope will help to mitigate any issues you have encountered. Rest assured that we will carefully consider all of the detailed comments you have provided. Thank you once again for your kind notes.
  8. slomblobov
    This restriction will be removed. NDM-3039
  9. slomblobov
    We will check this situation. Is there anything in the logs?
  10. slomblobov
    This setting only affects IPv4, i.e. NAT44. It seems you need to allow IPv6 traffic to pass through the "ipv6 static" command (this is available through the CLI interface). (config)> ipv6 static Usage template: static (tcp | udp | tcpudp) [{interface}] {mac} {port} [through {end-port}]
  11. slomblobov
    @Anton S в этой теме обсуждался интерфейс TunnelSixInFour. Gre пока не поддерживает Ipv6.
  12. slomblobov
    Начиная с 4.0.A.12.1 (NDM-2637) добавлена возможность указывать маску подсети в команде: @eralde имеет смысл добавить данный функционал в Web для версий 4.x.
  13. slomblobov
    It is possible to get this functionality by installing external packages. Entware Keenetic For example, to monitor APC UPS the following Entware packages may be used: apcupsd, apcupsd-cgi.
  14. slomblobov
    [I] Dec 7 14:56:43 ndm: Network::Interface::WebCaller::Zte: "CdcEthernet1": incorrect password. Please update to 3.9x and assign a password by using the following: interface CdcEthernet0 web-api login <your login> interface CdcEthernet0 web-api password <your password>
  15. slomblobov
    Right, it is not possible to modify standard profile. But you can create your own and set it as default.
  16. slomblobov
    By the way, I tried to use 464xlat on the router side to workaround the IPv6 only issue , but it doesn't work. ping 8.8.4.4
  17. slomblobov
    It is also possible to follow a direct link and modify your profile settings(IP type): http://192.168.1.1/default.html#settings/profileManagement.html
  18. slomblobov
    Now IPv6 it partially works: address is obtained, but prefix doesn't. LAN will not work with this configuration. The only way to make it work is to somehow enable IPv4 on the modem.
  19. slomblobov
    Please try to enable IPv6 transport between modem and router by setting the following: interface CdcEthernet0 ipv6 address auto interface CdcEthernet0 ipv6 prefix auto
  20. slomblobov
    It seems that your modem is connected to IPv6 network. But the modem is connected to the router via IPv4. Could you enable IPv4 or IPv4/IPv6 in modem settings?
  21. slomblobov
    Yes, we are considering it.
  22. slomblobov
    ICMPv6 ping was only disabled. It doesn't seem to be necessary. We are preparing a new version, hopefully it will be released soon.
  23. slomblobov
    Yes, ICMPv6 ping forwarding rules were deleted. But there is some different solution... We have implemented DHCPv6 prefix delegation since NDMS 4.x. You may try to configure your device using the following configuration: In this configuration we have /63 network which consists of /64 LAN and delegation pool with one /64 network. No firewall rules need to be added but your VM must support DHCPv6.
  24. slomblobov
    Thanks for the report. We're working on it
  25. slomblobov
    Thanks for the report. I can confirm that we lost this functionality by accident. Will be fixed in future versions. NDM-1975 NDM-2363.
×
×
  • Create New...