sergeyk
-
Posts
1449 -
Joined
-
Last visited
-
Days Won
10
Community Answers
-
sergeyk's post in KN-1810 sometimes stops working. Fw 3.9.3 was marked as the answer
You may reduce the effect if you will exclude https and TLS protocols from your ping check profile mode setting.
-
sergeyk's post in System operating modes in the component list ?? was marked as the answer
In models manufactured with two system modes (router/extender) it is not allowed to change a system mode set.
-
sergeyk's post in Reset: How to reset System Components? was marked as the answer
@rAcKShen A factory firmware comes with a minimal set of components. You may install it from the cloud by the following commands:
components list components preset minimal components commit First command gets a components list from a server. Each component may be included in a specific preset. For example, "base" component is in "minimal" and "recommended" presets:
component: name: base ... preset: minimal preset: recommended Second command selects components from the "minimal" preset only.
Third runs a cloud request and installs the firmware with the selected components.
-
sergeyk's post in Simple Wi-Fi Access Point: No LLDP? was marked as the answer
You may use
interface {name} lldp disable specifically to your case
interface Home lldp disable should disable LLDP.
Do not forget to save the configuration
copy running-config startup-config
-
sergeyk's post in RCI Reboot was marked as the answer
GET-запрос возвращает настройки, связанные с этой командой (пустой объект). Чтобы выполнить команду, а не получать настройки, нужно послать POST:
wget --user=admin --password=1234 --post-data='{}' http://192.168.1.1/rci/system/reboot
-
sergeyk's post in Пропал виртуальный канал PVC после обновления was marked as the answer
У вас установлен модуль поддержки UsbDsl (Keenetic Plus DSL) на Keenetic DSL.
Модуль UsbDsl мешает работе встроенного интерфейса Adsl0.