PriSonerS61 Posted September 30, 2023 Share Posted September 30, 2023 Hi @eralde On the "Wi-fi system" page, the "standard" data appears incorrect. On this page it is 802.11N, while on the extender interface and in the "show mws associations" output it is 802.11AC There should be 802.11AC everywhere. show mws associations { "station": [ { "mac": "*******", "ap": "WifiMaster0/Backhaul0", "authenticated": true, "txrate": 702, "rxrate": 867, "uptime": 16144, "txbytes": 170933203, "rxbytes": 1501900948, "ht": 80, "mode": "11ac", "gi": 800, "rssi": -53, "mcs": 8, "txss": 2, "ebf": true, "dl-mu": true, "pmf": true, "security": "wpa2-psk" } ], "prompt": "(config)" } 1 Quote Link to comment Share on other sites More sharing options...
0 eralde Posted October 5, 2023 Share Posted October 5, 2023 В 30.09.2023 в 18:15, PriSonerS61 сказал: Hi @eralde On the "Wi-fi system" page, the "standard" data appears incorrect. On this page it is 802.11N, while on the extender interface and in the "show mws associations" output it is 802.11AC There should be 802.11AC everywhere. Please provide the output of the show ip hotspot command on the controller (only the extender device data block is needed), as well as the output of the show mws associations command (is it executed on the extender itself?) and the self-test files from both devices. Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 5, 2023 Author Share Posted October 5, 2023 18 minutes ago, eralde said: Please provide the output of the show ip hotspot command on the controller (only the extender device data block is needed), as well as the output of the show mws associations command (is it executed on the extender itself?) and the self-test files from both devices. Hello. Thank you for your concern. The command "show mws associations" was executed on the "controller" device. Anyway, no response will be returned when this command is written to the extender device. In the next hidden message I will tag you and attach the self-test file from both devices. show ip hotspot Spoiler { "mac": "50:ff:20:**:**:**", "via": "50:ff:20:**:**:**", "ip": "192.168.1.2", "hostname": "Sprinter", "name": "Sprinter (KN-3710)", "system-mode": "extender", "interface": { "id": "Bridge0", "name": "Home", "description": "Home network" }, "dhcp": { "static": true }, "registered": true, "access": "permit", "schedule": "", "priority": 6, "active": true, "rxbytes": 1808496, "txbytes": 3255177, "uptime": 152374, "first-seen": 152374, "last-seen": 18, "http-port": 80, "description": "Keenetic Sprinter (NDMS 4.01.A.10.0-0): KN-3710", "firmware": "4.01.A.10.0-0", "traffic-shape": { "rx": 0, "tx": 0, "mode": "mac", "schedule": "" }, "mac-access": { "Bridge0": "deny", "Bridge1": "deny" } }, Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 5, 2023 Author Share Posted October 5, 2023 Maybe the problem is related to the problem and fix in the link below. Maybe it could be a clue... Quote Link to comment Share on other sites More sharing options...
0 eralde Posted October 5, 2023 Share Posted October 5, 2023 1 час назад, PriSonerS61 сказал: Hello. Thank you for your concern. The command "show mws associations" was executed on the "controller" device. Anyway, no response will be returned when this command is written to the extender device. In the next hidden message I will tag you and attach the self-test file from both devices. show ip hotspot I apologize, but I misled you. We use data from the show mws member (on the controller) command output do display the Wi-Fi standard in the UI. Still the show mws member command output is present in the self-test file, so I've checked it out. It looks like the controller UI shows the correct standard, there is no 802.11ac for the 2.4 GHz band. https://help.keenetic.com/hc/en-us/articles/213968949-What-you-need-to-know-about-Wi-Fi-5-IEEE-802-11ac- We should fix the standard displayed in the extender UI. Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 5, 2023 Author Share Posted October 5, 2023 12 minutes ago, eralde said: I apologize, but I misled you. We use data from the show mws member (on the controller) command output do display the Wi-Fi standard in the UI. Still the show mws member command output is present in the self-test file, so I've checked it out. It looks like the controller UI shows the correct standard, there is no 802.11ac for the 2.4 GHz band. https://help.keenetic.com/hc/en-us/articles/213968949-What-you-need-to-know-about-Wi-Fi-5-IEEE-802-11ac- We should fix the standard displayed in the extender UI. In the "show mws member" output, "mode": "11ac". It also appears as "AC" in Selftest. If the data is taken from the "show mws member" output, how can it be wrong on the interface when the "show mws member" output has the correct data ? My device is already connected with 5ghz, not 2.4ghz. 5ghz 2x2 80mhz In this case, the data in the "show mws member" output matches the "mode" data on the interface of the extender device, but the data on the controller device does not match. Contrary to what you say, the data on the interface of the controller device should be corrected, not the data on the interface of the extender device. show mws member (controller) Spoiler "backhaul": { "uplink": "WifiMaster1/WifiStation0", "root": "8000.50:ff:**:**:**:**", "bridge": "8000.50:ff:**:**:**:**", "cost": 50, "ap": "WifiMaster0/Backhaul0", "authenticated": true, "txrate": 702, "uptime": 4264, "ht": 80, "mode": "11ac", "gi": 800, "rssi": -52, "mcs": 8, "txss": 2, "ebf": true, "dl-mu": true, "pmf": true, "security": "wpa2-psk" }, controller Spoiler extender Spoiler Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 5, 2023 Author Share Posted October 5, 2023 This is another proof that in the data coming to the page via RCI, i.e. in "show mws member", it looks correct, but in the interface it looks wrong. https://ibb.co/vH6CvgK Spoiler Quote Link to comment Share on other sites More sharing options...
0 eralde Posted October 5, 2023 Share Posted October 5, 2023 @Padavan, please, check the provided data. 1 Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 13, 2023 Author Share Posted October 13, 2023 On 10/5/2023 at 10:41 PM, eralde said: @Padavan, please, check the provided data. Hello @eralde. @Padavan doesn't seem to be active for a long time. Were you able to determine the cause of the problem in the background? Quote Link to comment Share on other sites More sharing options...
0 eralde Posted October 18, 2023 Share Posted October 18, 2023 В 13.10.2023 в 10:17, PriSonerS61 сказал: Hello @eralde. @Padavan doesn't seem to be active for a long time. Were you able to determine the cause of the problem in the background? Looks like we've found the source of the issue. It will be fixed in one of the future builds. 2 Quote Link to comment Share on other sites More sharing options...
0 PriSonerS61 Posted October 18, 2023 Author Share Posted October 18, 2023 9 minutes ago, eralde said: Looks like we've found the source of the issue. It will be fixed in one of the future builds. Good news. I'm wondering, is the source of the problem related to the interface or something else ? Does it have anything to do with the old problem and fix I posted above? Quote Link to comment Share on other sites More sharing options...
0 eralde Posted October 18, 2023 Share Posted October 18, 2023 10 минут назад, PriSonerS61 сказал: Good news. I'm wondering, is the source of the problem related to the interface or something else ? Does it have anything to do with the old problem and fix I posted above? No, at this point is looks like the issue is not related to the UI. 1 Quote Link to comment Share on other sites More sharing options...
Question
PriSonerS61
Hi @eralde On the "Wi-fi system" page, the "standard" data appears incorrect.
On this page it is 802.11N, while on the extender interface and in the "show mws associations" output it is 802.11AC
There should be 802.11AC everywhere.
show mws associations
{
"station": [
{
"mac": "*******",
"ap": "WifiMaster0/Backhaul0",
"authenticated": true,
"txrate": 702,
"rxrate": 867,
"uptime": 16144,
"txbytes": 170933203,
"rxbytes": 1501900948,
"ht": 80,
"mode": "11ac",
"gi": 800,
"rssi": -53,
"mcs": 8,
"txss": 2,
"ebf": true,
"dl-mu": true,
"pmf": true,
"security": "wpa2-psk"
}
],
"prompt": "(config)"
}
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.