home assistant Home Assistant

andrei123 · December 14, 2021

В 05.11.2021 в 22:34, dancom сказал:

1. Установить на роутер opkg:

https://help.keenetic.com/hc/ru/articles/360000948719-OPKG

https://help.keenetic.com/hc/ru/articles/360021214160

2.Зайти в SSH и выполнить по очереди четыре команды:

echo "src/gz ha http://bin.entware.net/mipselsf-k3.4/test/HA" >> /opt/etc/opkg.conf
opkg update
opkg install homeassistant
/opt/etc/init.d/S99hass start

3. В любом браузере перейти по адресу:

http://192.168.XX.XX:8123/

где XX.XX - ваша подсеть.

4. Наслаждаться.

TheBB · December 15, 2021

12 часа назад, andrei123 сказал:

но с homekit не проходит это.

все требования выполнены?

https://github.com/Entware/Entware/wiki/Self-installation-of-python-modules

https://github.com/Entware/Entware/wiki/Using-GCC-for-native-compilation

и т.д.

Скрытый текст

screen_2021-12-15_09:20:30_ha_hk1.png

screen_2021-12-15_09:21:16_ha_hk2.png

screen_2021-12-15_09:21:53_ha_hk3.png screen_2021-12-15_09:22:41_ha_hk4.png

screen_2021-12-15_09:23:38_ha_hk5.png

screen_2021-12-15_09:20:30_ha_hk1.png

screen_2021-12-15_09:25:30_ha_hk6.png

screen_2021-12-15_09:26:54_ha_hk7.png

screen_2021-12-15_09:27:26_ha_hk8.png

screen_2021-12-15_09:28:06_ha_hk9.png

al12s · December 15, 2021

16 часов назад, TheBB сказал:

"прибит гвоздями" к cryptography >= 35 (в НА был =35.0.0), текущая версия =3.4.8
^ требует для сборки "rust"
собсна, "финт ушами", если повезёт, то "взлетит" (можно и руками накатить, но долго рассказывать)
`pip uninstall python-miio` `pip uninstall cryptography` `opkg install --force-reinstall python3-cryptography`
накатываем "python3-miio" (пакет без зависимостей, только пропатчен на версию 3.4.8 cryptography)

Сделал следующее:

pip uninstall python-miio
pip uninstall cryptography
opkg install --force-reinstall python3-cryptography
opkg install /home/python3-miio_0.5.9.1-1_mipsel-3.4.ipk

HA долго грузился, в лог появилась ошибка:

Logger: homeassistant.setup
Source: setup.py:153
First occurred: 09:43:37 (1 occurrences)
Last logged: 09:43:37

Setup failed for xiaomi_miio: Unable to import component: cannot import name 'RoborockVacuum' from 'miio' (/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/miio/__init__.py)

устройства который использовали эту интеграцию не активные. Roborock Vacuum - у меня нет

Edited December 15, 2021 by al12s

al12s · December 15, 2021

Еще вылезла ошибка которой раньше не замечал, она появился после последнего обновления:

Logger: aiohttp.server
Source: components/homekit_controller/const.py:53
First occurred: 09:57:39 (2 occurrences)
Last logged: 09:58:12

Error handling request

Traceback (most recent call last): File "/opt/lib/python3.10/site-packages/aiohttp/web_protocol.py", line 435, in _handle_request File "/opt/lib/python3.10/site-packages/aiohttp/web_app.py", line 504, in _handle File "/opt/lib/python3.10/site-packages/aiohttp/web_middlewares.py", line 117, in impl File "/opt/lib/python3.10/site-packages/homeassistant/components/http/security_filter.py", line 60, in security_filter_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/forwarded.py", line 98, in forwarded_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/request_context.py", line 28, in request_context_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/ban.py", line 78, in ban_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/auth.py", line 181, in auth_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/view.py", line 137, in handle File "/opt/lib/python3.10/site-packages/homeassistant/components/config/config_entries.py", line 130, in post File "/opt/lib/python3.10/site-packages/homeassistant/components/http/data_validator.py", line 62, in wrapper File "/opt/lib/python3.10/site-packages/homeassistant/helpers/data_entry_flow.py", line 71, in post File "/opt/lib/python3.10/site-packages/homeassistant/data_entry_flow.py", line 203, in async_init File "/opt/lib/python3.10/site-packages/homeassistant/data_entry_flow.py", line 221, in _async_init File "/opt/lib/python3.10/site-packages/homeassistant/config_entries.py", line 718, in async_create_flow File "/opt/lib/python3.10/site-packages/homeassistant/loader.py", line 530, in get_platform File "/opt/lib/python3.10/site-packages/homeassistant/loader.py", line 535, in _import_platform File "/opt/lib/python3.10/importlib/__init__.py", line 126, in import_module File "<frozen importlib._bootstrap>", line 1050, in _gcd_import File "<frozen importlib._bootstrap>", line 1027, in _find_and_load File "<frozen importlib._bootstrap>", line 992, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "<frozen importlib._bootstrap>", line 1050, in _gcd_import File "<frozen importlib._bootstrap>", line 1027, in _find_and_load File "<frozen importlib._bootstrap>", line 1006, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 688, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/__init__.py", line 21, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/config_flow.py", line 18, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/connection.py", line 21, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/const.py", line 53, in <module> AttributeError: type object 'Vendor' has no attribute 'HAA_SETUP'

При попытки установить интеграцию "homekit_controller" выдает ошибку.

Edited December 15, 2021 by al12s

andrei123 · December 15, 2021

1 час назад, TheBB сказал:

все требования выполнены?

https://github.com/Entware/Entware/wiki/Self-installation-of-python-modules

https://github.com/Entware/Entware/wiki/Using-GCC-for-native-compilation

и т.д.

Скрыть содержимое

дык там по английски. попробую )))

TheBB · December 15, 2021

7 часов назад, al12s сказал:

/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/miio/__init__.py

? у мну такого нет

~ # ls -1d /opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/mi*
/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/micloud
/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/micloud-0.4-py3.10.egg-info
~ #

7 часов назад, al12s сказал:

При попытки установить интеграцию "homekit_controller" выдает ошибку.

установка "HomeKit Controller" выше (в картинках)

логи (as is):

~ # 
~ # cat /opt/var/lib/homeassistant/home-assistant.log
2021-12-14 23:00:11 ERROR (MainThread) [homeassistant.components.speedtestdotnet] Error fetching speedtestdotnet data: Unable to connect to servers to test latency.
2021-12-15 09:22:29 ERROR (MainThread) [homeassistant.components.homekit.util] media_player.tv_samsung_led49 does not support any media_player features
2021-12-15 09:33:16 ERROR (MainThread) [homeassistant.components.upnp] Error requesting Keenetic Gateway data: [Errno 104] Connection reset by peer
2021-12-15 13:14:01 ERROR (MainThread) [homeassistant.components.upnp] Timeout fetching Keenetic Gateway data
~ #
~ # cat /opt/var/lib/homeassistant/home-assistant.log.1 
~ # 
~ # cat /opt/var/lib/homeassistant/home-assistant.log.fault 
~ #

OlegOs · December 16, 2021

Ещё одна проблема (с предыдущими разобрался) после обновления перестала работать интеграция с телевизором LG. Работает только включение через magic packet, остальное нет.

У кого-нибудь есть проблема с LG TV после обновления?

В логе вот что:

Скрытый текст

2021-12-16 12:27:47 ERROR (MainThread) [homeassistant.helpers.entity] Update for media_player.tv_eth fails

Traceback (most recent call last):

File "/opt/lib/python3.10/site-packages/homeassistant/helpers/entity.py", line 487, in async_update_ha_state

File "/opt/lib/python3.10/site-packages/homeassistant/helpers/entity.py", line 691, in async_device_update

File "/opt/lib/python3.10/site-packages/homeassistant/components/webostv/media_player.py", line 226, in async_update

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/aiopylgtv/webos_client.py", line 152, in connect

return await self.connect_result

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/aiopylgtv/webos_client.py", line 180, in connect_handler

ws = await asyncio.wait_for(

File "/opt/lib/python3.10/asyncio/tasks.py", line 447, in wait_for

File "/opt/lib/python3.10/asyncio/tasks.py", line 648, in _wrap_awaitable

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/client.py", line 622, in __await_impl__

transport, protocol = await self._create_connection()

File "/opt/lib/python3.10/asyncio/base_events.py", line 1080, in create_connection

File "/opt/lib/python3.10/asyncio/base_events.py", line 1098, in _create_connection_transport

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/client.py", line 160, in __init__

super().__init__(**kwargs)

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/protocol.py", line 154, in __init__

self._drain_lock = asyncio.Lock(

File "/opt/lib/python3.10/asyncio/locks.py", line 77, in __init__

File "/opt/lib/python3.10/asyncio/mixins.py", line 17, in __init__

TypeError: As of 3.10, the *loop* parameter was removed from Lock() since it is no longer necessary

Здесь https://github.com/home-assistant/core/issues/60064 пишут про похожую проблему после перехода на python 3.10, и предлагают обновить websockets до 10.1.

Edited December 16, 2021 by Олег Осипов
скорректировал

TheBB · December 16, 2021

3 часа назад, Олег Осипов сказал:

Здесь https://github.com/home-assistant/core/issues/60064 пишут про похожую проблему после перехода на python 3.10, и предлагают обновить websockets до 10.1.

улыбнуло...

Цитата

Just a small little note: We don't support Python 3.10 yet (but good we have this as an issue logged!).

дык и обновите, делов-то

Скрытый текст

~ # pip install websockets==10.1
Collecting websockets==10.1
  Downloading websockets-10.1.tar.gz (83 kB)
     |████████████████████████████████| 83 kB 212 kB/s 
Using legacy 'setup.py install' for websockets, since package 'wheel' is not installed.
Installing collected packages: websockets
    Running setup.py install for websockets ... done
Successfully installed websockets-10.1
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.2.3; however, version 21.3.1 is available.
You should consider upgrading via the '/opt/bin/python3 -m pip install --upgrade pip' command.
~ # 
~ # grep -Er '^#!.*python' /opt/lib/python3.10/site-packages/websockets/
~ # 
~ # ls -al /opt/lib/python3.10/site-packages/websockets/
drwxr-xr-x    5 root     root          4096 Dec 16 13:40 .
drwxr-xr-x  262 root     root         20480 Dec 16 13:40 ..
-rw-r--r--    1 root     root          3436 Nov 14 23:04 __init__.py
-rw-r--r--    1 root     root          7255 Nov 14 23:04 __main__.py
drwxr-xr-x    2 root     root          4096 Dec 16 13:40 __pycache__
-rw-r--r--    1 root     root           147 Nov 14 23:04 auth.py
-rw-r--r--    1 root     root         11820 Nov 14 23:04 client.py
-rw-r--r--    1 root     root         23408 Nov 14 23:04 connection.py
-rw-r--r--    1 root     root          5086 Nov 14 23:04 datastructures.py
-rw-r--r--    1 root     root         10049 Nov 14 23:04 exceptions.py
drwxr-xr-x    3 root     root          4096 Dec 16 13:40 extensions
-rw-r--r--    1 root     root         12229 Nov 14 23:04 frames.py
-rw-r--r--    1 root     root         16120 Nov 14 23:04 headers.py
-rw-r--r--    1 root     root           644 Nov 14 23:04 http.py
-rw-r--r--    1 root     root         12350 Nov 14 23:04 http11.py
-rw-r--r--    1 root     root          2790 Nov 14 23:04 imports.py
drwxr-xr-x    3 root     root          4096 Dec 16 13:40 legacy
-rw-r--r--    1 root     root             0 Nov 14 23:04 py.typed
-rw-r--r--    1 root     root         17972 Nov 14 23:04 server.py
-rw-r--r--    1 root     root          5835 Nov 14 23:04 speedups.c
-rwxr-xr-x    1 root     root          7080 Dec 16 13:40 speedups.cpython-310.so
-rw-r--r--    1 root     root          4038 Nov 14 23:04 streams.py
-rw-r--r--    1 root     root          1384 Nov 14 23:04 typing.py
-rw-r--r--    1 root     root          3201 Nov 14 23:04 uri.py
-rw-r--r--    1 root     root          1150 Nov 14 23:04 utils.py
-rw-r--r--    1 root     root          2598 Nov 14 23:04 version.py
~ # 
~ # ldd /opt/lib/python3.10/site-packages/websockets/speedups.cpython-310.so 
	linux-vdso.so.1 (0x776f9000)
	libgcc_s.so.1 => /opt/lib/libgcc_s.so.1 (0x77690000)
	libc.so.6 => /opt/lib/libc.so.6 (0x774fd000)
	libstdc++.so.6 => /opt/lib/libstdc++.so.6 (0x77359000)
	/opt/lib/ld.so.1 (0x776c7000)
	libm.so.6 => /opt/lib/libm.so.6 (0x77251000)
~ #

OlegOs · December 16, 2021

Обновил, правда speedups.cpython-310.so у меня нет:

На проблему это не повлияло, может из-за этого файла?

Скрытый текст

~ # pip install websockets==10.1
Collecting websockets==10.1
Downloading websockets-10.1.tar.gz (83 kB)
|████████████████████████████████| 83 kB 248 kB/s
Using legacy 'setup.py install' for websockets, since package 'wheel' is not installed.
Installing collected packages: websockets
Running setup.py install for websockets ... done
Successfully installed websockets-10.1
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.2.3; however, version 21.3.1 is available.
You should consider upgrading via the '/opt/bin/python3 -m pip install --upgrade pip' command.
~ # grep -Er '^#!.*python' /opt/lib/python3.10/site-packages/websockets/
~ # ls -al /opt/lib/python3.10/site-packages/websockets/
drwxr-xr-x 5 root root 4096 Dec 16 18:28 .
drwxr-xr-x 229 root root 8192 Dec 16 18:28 ..
-rw-r--r-- 1 root root 3436 Nov 15 03:04 __init__.py
-rw-r--r-- 1 root root 7255 Nov 15 03:04 __main__.py
drwxr-xr-x 2 root root 4096 Dec 16 18:28 __pycache__
-rw-r--r-- 1 root root 147 Nov 15 03:04 auth.py
-rw-r--r-- 1 root root 11820 Nov 15 03:04 client.py
-rw-r--r-- 1 root root 23408 Nov 15 03:04 connection.py
-rw-r--r-- 1 root root 5086 Nov 15 03:04 datastructures.py
-rw-r--r-- 1 root root 10049 Nov 15 03:04 exceptions.py
drwxr-xr-x 3 root root 4096 Dec 16 18:28 extensions
-rw-r--r-- 1 root root 12229 Nov 15 03:04 frames.py
-rw-r--r-- 1 root root 16120 Nov 15 03:04 headers.py
-rw-r--r-- 1 root root 644 Nov 15 03:04 http.py
-rw-r--r-- 1 root root 12350 Nov 15 03:04 http11.py
-rw-r--r-- 1 root root 2790 Nov 15 03:04 imports.py
drwxr-xr-x 3 root root 4096 Dec 16 18:28 legacy
-rw-r--r-- 1 root root 0 Nov 15 03:04 py.typed
-rw-r--r-- 1 root root 17972 Nov 15 03:04 server.py
-rw-r--r-- 1 root root 5835 Nov 15 03:04 speedups.c
-rw-r--r-- 1 root root 4038 Nov 15 03:04 streams.py
-rw-r--r-- 1 root root 1384 Nov 15 03:04 typing.py
-rw-r--r-- 1 root root 3201 Nov 15 03:04 uri.py
-rw-r--r-- 1 root root 1150 Nov 15 03:04 utils.py
-rw-r--r-- 1 root root 2598 Nov 15 03:04 version.py
~ # ldd /opt/lib/python3.10/site-packages/websockets/speedups.cpython-310.so
-sh: ldd: not found
~ # opkg install ldd
Installing ldd (2.27-11) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/ldd_2.27-11_mipsel-3.4.ipk
Configuring ldd.
~ # ldd /opt/lib/python3.10/site-packages/websockets/speedups.cpython-310.so
ldd: /opt/lib/python3.10/site-packages/websockets/speedups.cpython-310.so: $No such file or directory
~ #

Log:

Скрытый текст

2021-12-16 18:50:53 ERROR (MainThread) [homeassistant.helpers.entity] Update for media_player.tv_eth fails

Traceback (most recent call last):

File "/opt/lib/python3.10/site-packages/homeassistant/helpers/entity.py", line 487, in async_update_ha_state

File "/opt/lib/python3.10/site-packages/homeassistant/helpers/entity.py", line 691, in async_device_update

File "/opt/lib/python3.10/site-packages/homeassistant/components/webostv/media_player.py", line 226, in async_update

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/aiopylgtv/webos_client.py", line 152, in connect

return await self.connect_result

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/aiopylgtv/webos_client.py", line 180, in connect_handler

ws = await asyncio.wait_for(

File "/opt/lib/python3.10/asyncio/tasks.py", line 447, in wait_for

File "/opt/lib/python3.10/asyncio/tasks.py", line 648, in _wrap_awaitable

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/client.py", line 622, in __await_impl__

transport, protocol = await self._create_connection()

File "/opt/lib/python3.10/asyncio/base_events.py", line 1080, in create_connection

File "/opt/lib/python3.10/asyncio/base_events.py", line 1098, in _create_connection_transport

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/client.py", line 160, in __init__

super().__init__(**kwargs)

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/websockets/legacy/protocol.py", line 154, in __init__

self._drain_lock = asyncio.Lock(

File "/opt/lib/python3.10/asyncio/locks.py", line 77, in __init__

File "/opt/lib/python3.10/asyncio/mixins.py", line 17, in __init__

TypeError: As of 3.10, the *loop* parameter was removed from Lock() since it is no longer necessary

TheBB · December 16, 2021

чего-то не хватает/не установлено

вырезка (не мясная):

...
    creating build/temp.linux-mips-3.10/src/websockets
    /opt/bin/gcc -Wno-unused-result -Wsign-compare -DNDEBUG -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -pthread -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -pthread -I/opt/include -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float -I/opt/include -fPIC -I/opt/include/python3.10 -c src/websockets/speedups.c -o build/temp.linux-mips-3.10/src/websockets/speedups.o
    gcc -shared -Wl,--dynamic-linker=/opt/lib/ld.so.1 -Wl,-rpath=/opt/lib -L/opt/lib -L/work/testing/Entware-sync/build_dir/target-mipsel_mips32r2_glibc-2.27/Python-3.10.0 -L/opt/lib -Wl,--dynamic-linker=/opt/lib/ld.so.1 -Wl,-rpath=/opt/lib -L/opt/lib -L/work/testing/Entware-sync/build_dir/target-mipsel_mips32r2_glibc-2.27/Python-3.10.0 -L/opt/lib -Wl,-rpath=/opt/lib -Wl,--dynamic-linker=/opt/lib/ld.so.1 -L/opt/lib -O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float -I/opt/include build/temp.linux-mips-3.10/src/websockets/speedups.o -L/opt/lib -o build/lib.linux-mips-3.10/websockets/speedups.cpython-310.so
    running install_lib
...

full log https://pastebin.com/23tyRxKh

OlegOs · December 17, 2021

TheBB, спасибо !

Заработало после того как удалил папку opt\var\lib\homeassistant\deps\lib\python3.10\site-packages\websockets где была старая версия, похоже HA сначала пытается туда обращаться.

Заново она не создалась и похоже HA теперь берёт свежую версию отсюда - opt\lib\python3.10\site-packages\websockets, где обновил !

Такая же проблема была у меня со старой версией интерфейса, которую описывал выше, пока не пересоздал профиль удалив opt\var\lib\homeassistant.

TheBB · December 21, 2021

bump to 2021.12.4

screen_2021-12-21_12:05:36_ha.png

OlegOs · December 23, 2021

TheBB, спасибо обновился нормально !

По моим ощущениям эта версия меньше проц грузит чем предыдущая !

nomadfromx · December 24, 2021

Добрый день всем! Прошу подсказать, попробовал с нуля поставить HA, но вебморда что-то не работает. Как проверить, почему так?

klepan · December 24, 2021

43 минуты назад, nomadfromx сказал:

Добрый день всем! Прошу подсказать, попробовал с нуля поставить HA, но вебморда что-то не работает. Как проверить, почему так?

Запустить с дебагом и смотреть вывод

hass -c /opt/var/lib/homeassistant --debug

nomadfromx · December 24, 2021

50 минут назад, klepan сказал:
Запустить с дебагом и смотреть вывод
hass -c /opt/var/lib/homeassistant --debug

Спасибо. Если честно, то не вижу чего-то криминального:

~ # /opt/etc/init.d/S99hass start
 Starting hass...              done.
~ # hass -c /opt/var/lib/homeassistant --debug
2021-12-24 11:48:39 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-9' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:259>cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.161 seconds
2021-12-24 11:48:39 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-10' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:259> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.169 seconds
2021-12-24 11:48:40 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-1' coro=<setup_and_run_hass() running at /opt/lib/python3.10/site-packages/homeassistant/runner.py:103> wait_for=<_GatheringFuture pending cb=[Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/tasks.py:663> cb=[_run_until_complete_cb() at /opt/lib/python3.10/asyncio/base_events.py:184] created at /opt/lib/python3.10/asyncio/tasks.py:638> took 0.278 seconds
2021-12-24 11:48:40 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-1' coro=<setup_and_run_hass() running at /opt/lib/python3.10/site-packages/homeassistant/runner.py:103> wait_for=<_GatheringFuture pending cb=[Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/tasks.py:663> cb=[_run_until_complete_cb() at /opt/lib/python3.10/asyncio/base_events.py:184] created at /opt/lib/python3.10/asyncio/tasks.py:638> took 0.155 seconds
2021-12-24 11:48:47 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-95' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<_GatheringFuture pending cb=[Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/tasks.py:663> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 6.686 seconds
2021-12-24 11:48:47 WARNING (Recorder) [homeassistant.components.recorder.util] The system could not validate that the sqlite3 database at //opt/var/lib/homeassistant/home-assistant_v2.db was shutdown cleanly
2021-12-24 11:48:48 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-100' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Task pending name='Task-101' coro=<Store._async_load() running at /opt/lib/python3.10/site-packages/homeassistant/helpers/storage.py:116> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.305 seconds
2021-12-24 11:48:48 WARNING (Recorder) [homeassistant.components.recorder.util] Ended unfinished session (id=4 from 2021-12-24 08:48:44.775603)
2021-12-24 11:48:49 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-1' coro=<setup_and_run_hass() running at /opt/lib/python3.10/site-packages/homeassistant/runner.py:103> wait_for=<Future pending cb=[Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/base_events.py:424> cb=[_run_until_complete_cb() at /opt/lib/python3.10/asyncio/base_events.py:184] created at /opt/lib/python3.10/asyncio/tasks.py:638> took 0.112 seconds
2021-12-24 11:48:49 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-135' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Future pending cb=[Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/base_events.py:424> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.196 seconds
2021-12-24 11:48:49 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-138' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:259> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.195 seconds
2021-12-24 11:48:49 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-139' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Task pending name='Task-163' coro=<Store._async_load() running at /opt/lib/python3.10/site-packages/homeassistant/helpers/storage.py:116> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.174 seconds
2021-12-24 11:48:51 WARNING (MainThread) [asyncio] Executing <Task finished name='Task-154' coro=<async_setup.<locals>.setup_panel() done, defined at /opt/lib/python3.10/site-packages/homeassistant/components/config/__init__.py:42> result=None created at /opt/lib/python3.10/asyncio/tasks.py:337> took 1.237 seconds
2021-12-24 11:48:51 WARNING (MainThread) [asyncio] Executing <Task finished name='Task-155' coro=<async_setup.<locals>.setup_panel() done, defined at /opt/lib/python3.10/site-packages/homeassistant/components/config/__init__.py:42> result=None created at /opt/lib/python3.10/asyncio/tasks.py:337> took 0.102 seconds
2021-12-24 11:48:52 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-132' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Task pending name='Task-205' coro=<Store._async_load() running at /opt/lib/python3.10/site-packages/homeassistant/helpers/storage.py:116> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> cb=[Task.task_wakeup(), Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.258 seconds
2021-12-24 11:48:54 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-133' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Task pending name='Task-214' coro=<Store._async_load() running at /opt/lib/python3.10/site-packages/homeassistant/helpers/storage.py:116> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> cb=[Task.task_wakeup(), Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 1.974 seconds
2021-12-24 11:48:54 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-131' coro=<_async_setup_component() running at /opt/lib/python3.10/site-packages/homeassistant/setup.py:229> wait_for=<Task pending name='Task-223' coro=<Store._async_load() running at /opt/lib/python3.10/site-packages/homeassistant/helpers/storage.py:116> cb=[Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> cb=[Task.task_wakeup(), Task.task_wakeup()] created at /opt/lib/python3.10/site-packages/homeassistant/core.py:393> took 0.118 seconds
2021-12-24 11:48:55 WARNING (MainThread) [asyncio] Executing <Task pending name='Task-217' coro=<async_get_integration_with_requirements() running at /opt/lib/python3.10/site-packages/homeassistant/requirements.py:85> wait_for=<Future pending cb=[_chain_future.<locals>._call_check_cancel() at /opt/lib/python3.10/asyncio/futures.py:384, Task.task_wakeup()] created at /opt/lib/python3.10/asyncio/base_events.py:424> cb=[gather.<locals>._done_callback() at /opt/lib/python3.10/asyncio/tasks.py:718] created at /opt/lib/python3.10/asyncio/tasks.py:638> took 1.093 seconds

nomadfromx · December 24, 2021

Снимаю вопрос. Запустилось. Наверное очень долго базу формировало при первом запуске.

al12s · December 25, 2021

В 15.12.2021 в 17:05, TheBB сказал:

установка "HomeKit Controller" выше (в картинках)

при попытке добавить интеграцию HomeKit Controller, выдает ошибку: не удалось загрузить мастер настройки
при этом интеграция HomeKit работает без проблем.

в логах следующее:

Logger: aiohttp.server
Source: components/homekit_controller/const.py:53
First occurred: 16:12:29 (1 occurrences)
Last logged: 16:12:29

Error handling request

Traceback (most recent call last): File "/opt/lib/python3.10/site-packages/aiohttp/web_protocol.py", line 435, in _handle_request File "/opt/lib/python3.10/site-packages/aiohttp/web_app.py", line 504, in _handle File "/opt/lib/python3.10/site-packages/aiohttp/web_middlewares.py", line 117, in impl File "/opt/lib/python3.10/site-packages/homeassistant/components/http/security_filter.py", line 60, in security_filter_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/forwarded.py", line 98, in forwarded_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/request_context.py", line 28, in request_context_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/ban.py", line 78, in ban_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/auth.py", line 181, in auth_middleware File "/opt/lib/python3.10/site-packages/homeassistant/components/http/view.py", line 137, in handle File "/opt/lib/python3.10/site-packages/homeassistant/components/config/config_entries.py", line 130, in post File "/opt/lib/python3.10/site-packages/homeassistant/components/http/data_validator.py", line 62, in wrapper File "/opt/lib/python3.10/site-packages/homeassistant/helpers/data_entry_flow.py", line 71, in post File "/opt/lib/python3.10/site-packages/homeassistant/data_entry_flow.py", line 203, in async_init File "/opt/lib/python3.10/site-packages/homeassistant/data_entry_flow.py", line 221, in _async_init File "/opt/lib/python3.10/site-packages/homeassistant/config_entries.py", line 718, in async_create_flow File "/opt/lib/python3.10/site-packages/homeassistant/loader.py", line 530, in get_platform File "/opt/lib/python3.10/site-packages/homeassistant/loader.py", line 535, in _import_platform File "/opt/lib/python3.10/importlib/__init__.py", line 126, in import_module File "<frozen importlib._bootstrap>", line 1050, in _gcd_import File "<frozen importlib._bootstrap>", line 1027, in _find_and_load File "<frozen importlib._bootstrap>", line 992, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "<frozen importlib._bootstrap>", line 1050, in _gcd_import File "<frozen importlib._bootstrap>", line 1027, in _find_and_load File "<frozen importlib._bootstrap>", line 1006, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 688, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/__init__.py", line 21, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/config_flow.py", line 18, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/connection.py", line 21, in <module> File "/opt/lib/python3.10/site-packages/homeassistant/components/homekit_controller/const.py", line 53, in <module> AttributeError: type object 'Vendor' has no attribute 'HAA_SETUP'

Edited December 25, 2021 by al12s

alexm · December 29, 2021

В 14.12.2021 в 21:05, andrei123 сказал:

Всем привет! Все установил и запустил по инструкции. Ошибок не наблюдал, но к веб морде по адресу http://192.168.1.1:8123/ не могу подключиться.

Не удается получить доступ к сайту

Сайт 192.168.1.1 не позволяет установить соединение.

Попробуйте сделать следующее:

Проверьте подключение к Интернету.
Проверьте настройки прокси-сервера и брандмауэра.

ERR_CONNECTION_REFUSED

Подскажите куда копать?

al12s · December 30, 2021

На последней версии у меня тоже наблюдалась аналогичная проблема. Поле полного перезапуска HA и спустя минут 15 запустилась веб морда.

al12s · December 30, 2021

Не могу исправить проблему, в логах постоянная ошибка. Подскажите как исправить если знаете. ЗАРАНЕЕ СПАСИБО!

opkg install python3-pyturbojpeg - выполнял.

Logger: homeassistant.components.camera.img_util
Source: deps/lib/python3.10/site-packages/turbojpeg.py:893
Integration: Камера (documentation, issues)
First occurred: 09:28:25 (1 occurrences)
Last logged: 09:28:25

Error loading libturbojpeg; Cameras may impact HomeKit performance

Traceback (most recent call last):
  File "/opt/lib/python3.10/site-packages/homeassistant/components/camera/img_util.py", line 96, in __init__
  File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/turbojpeg.py", line 286, in __init__
    self.__find_turbojpeg() if lib_path is None else lib_path)
  File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/turbojpeg.py", line 893, in __find_turbojpeg
    raise RuntimeError(
RuntimeError: Unable to locate turbojpeg library automatically. You may specify the turbojpeg library path manually.
e.g. jpeg = TurboJPEG(lib_path)

Edited December 30, 2021 by al12s

alexm · December 30, 2021

37 минут назад, al12s сказал:

На последней версии у меня тоже наблюдалась аналогичная проблема. Поле полного перезапуска HA и спустя минут 15 запустилась веб морда.

Да, действительно, утром встал, а уже все заработало)

TheBB · December 30, 2021

2 часа назад, al12s сказал:

Не могу исправить проблему, в логах постоянная ошибка.

удалить

2 часа назад, al12s сказал:

File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/turbojpeg.py"

или править руками (см. патч)

TheBB · December 30, 2021

bump to 2021.12.7

screen_2021-12-30_13:09:34_ha.png

al12s · December 30, 2021

9 часов назад, TheBB сказал:

удалить

или править руками (см. патч)

Спасибо вариант с патч`ем помог, но после обновления на новую версию (за что отдельное спасибо), в лога вылезло вот это

Logger: homeassistant.components.camera.img_util
Source: deps/lib/python3.10/site-packages/turbojpeg.py:288
Integration: Камера (documentation, issues)
First occurred: 21:04:55 (1 occurrences)
Last logged: 21:04:55

Error loading libturbojpeg; Cameras may impact HomeKit performance

Traceback (most recent call last): File "/opt/lib/python3.10/site-packages/homeassistant/components/camera/img_util.py", line 96, in __init__ File "/opt/var/lib/homeassistant/deps/lib/python3.10/site-packages/turbojpeg.py", line 288, in __init__ self.__init_decompress = turbo_jpeg.tjInitDecompress File "/opt/lib/python3.10/ctypes/__init__.py", line 387, in __getattr__ File "/opt/lib/python3.10/ctypes/__init__.py", line 392, in __getitem__ AttributeError: /opt/lib/libjpeg.so.62: undefined symbol: tjInitDecompress

OlegOs · December 31, 2021

TheBB, спасибо за обновление !

Всех с наступающим Новым Годом !!!

TheBB · December 31, 2021

20 часов назад, al12s сказал:

в лога вылезло вот это

PyTurboJpeg м.б. установлен неск-ми способами... Самим НА (в `/opt/var/lib/homeassistant/deps/...`), как зависимость интеграции; руками - `pip install ...` или `opkg install ...` (в `/opt/lib/python...). Выбирайте что-то одно, чтоб не было конфликтов.

al12s · December 31, 2021

2 часа назад, TheBB сказал:

PyTurboJpeg м.б. установлен неск-ми способами... Самим НА (в `/opt/var/lib/homeassistant/deps/...`), как зависимость интеграции; руками - `pip install ...` или `opkg install ...` (в `/opt/lib/python...). Выбирайте что-то одно, чтоб не было конфликтов.

действительно было установлено два пакета, удалил pip пакет PyTurboJPG и ошибка ушла.

al12s · December 31, 2021

В 30.12.2021 в 13:11, TheBB сказал:

bump to 2021.12.7

Заметил ошибку еще одну, не знаю появилась она после обновления или нет, но вроде раньше ее не замечал.

Logger: pyhap.characteristic
Source: deps/lib/python3.10/site-packages/pyhap/characteristic.py:193
First occurred: 20:17:59 (4 occurrences)
Last logged: 20:17:59

SecuritySystemCurrentState: value=0 is an invalid value.
SecuritySystemTargetState: value=0 is an invalid value.

al12s · December 31, 2021

14 часа назад, Олег Осипов сказал:

TheBB, спасибо за обновление !

Всех с наступающим Новым Годом !!!

Присоединяюсь к поздравлениям! С наступающим Новым Годом 2022!

Sign In

home assistant Home Assistant

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Moon_Light

BDV

drts

Posted Images

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Не удается получить доступ к сайту

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation

Recently Browsing 0 members