1000Mbps / Speed Differences (NTCE vs HWNAT)

[KYTECHNGAMING]

I observed a difference between using ntce and hwnat on my new 1000mbps line. I am not sure if it is necessary to use ntce in this bandwidth. But still, this blocking of the speed in the traffic engine gave rise to the thought that there is a problem.

- Keenetic Hero DSL (KN-2410)
- KeeneticOs 3.8.A.1

https://streamable.com/q0cf4f

NTCE Off / HWNAT On / Wired / Service Class "Default"
https://prnt.sc/25r2uw2

 

NTCE On / HWNAT Off / Wired / Service Class "Default"
https://prnt.sc/25r2yss

 

NTCE Off / HWNAT Off / Wired / Service Class "Default"
https://prnt.sc/25r34ak

 

 

[keenet07]

It is not a problem but a pattern.

The processor power is not enough to process the data stream without consequences at such a speed.

Edited January 3, 2022 by keenet07

[KYTECHNGAMING]

37 minutes ago, keenet07 said:

It is not a problem but a pattern.

The processor power is not enough to process the data stream without consequences at such a speed.

So, ntce's data processing algorithm is overloading the processor at these speeds?

Did I get right?

[keenet07]

of course.

it does not even overload, but eats away part of the available performance

Edited January 3, 2022 by keenet07

[KYTECHNGAMING]

1 hour ago, keenet07 said:

of course.

it does not even overload, but eats away part of the available performance

Then I just need to activate hwnat. I just use it. The built-in traffic shaper will also do its job.

I won't be able to use the usage analyzer with the R&S Pace2.

[Denis P]

3 минуты назад, yerebakan сказал:

Then I just need to activate hwnat. I just use it. The built-in traffic shaper will also do its job.

I won't be able to use the usage analyzer with the R&S Pace2.

You can use traffic analyzer with hwnat, but data is not precise.

To check how many connections are managed by hwnat type in cli:

show ppe

[KYTECHNGAMING]

19 hours ago, Denis P said:

You can use traffic analyzer with hwnat, but data is not precise.

To check how many connections are managed by hwnat type in cli:

show ppe

Thank's for the information. I kept hwnat turned off for the traffic analyzer to work efficiently. I have read in the articles. In this bandwidth, I will either choose one or both.

https://help.keenetic.com/hc/en-us/articles/4404928268818