Mesh Device Configuration Issues After 4.3 Alpha 6 Update

[ru.celebi]

After updating to version 4.3 Alpha 6, I noticed the following issues:

• The Buddy 6 mesh device does not display the settings for the Home segment.

• The Hero mesh device shows the Home segment settings as locked, which seems to be a bug.

Additionally, since our mesh device might be operating in wired mode, it should be possible to adjust the 2.4GHz channel independently from the controller.

Greetings from Türkiye, together with @KYTECHNGAMING

[ru.celebi]

Edit: With the A6 update, clients connected to Buddy6 are not receiving IP addresses. We temporarily resolved the issue by downgrading to the A5 version.

[eralde]

  On 11/18/2024 at 12:16 PM, ru.celebi said:

After updating to version 4.3 Alpha 6, I noticed the following issues:

• The Buddy 6 mesh device does not display the settings for the Home segment.

Expand  

Thank you for the report, that is a bug in Alpha 6. It will be fixed in a future version.

 

  On 11/18/2024 at 12:16 PM, ru.celebi said:

• The Hero mesh device shows the Home segment settings as locked, which seems to be a bug.

Expand  

That is not a bug. Extender settings that are configured by the controller are locked in the extender web UI.

However, at the moment some Wi-Fi parameters are still configurable only via the extender web UI, you can see them if you click on the “Advanced Settings” link in your screenshot.

 

  On 11/18/2024 at 12:16 PM, ru.celebi said:

Additionally, since our mesh device might be operating in wired mode, it should be possible to adjust the 2.4GHz channel independently from the controller.

Expand  

Basic Wi-Fi settings on the extender (SSID / Network protection / Password / ...) in both bands are synchronized with the controller. This is part of the Mesh Wi-Fi system design.

[ru.celebi]

  On 11/19/2024 at 5:07 AM, ru.celebi said:

Edit: With the A6 update, clients connected to Buddy6 are not receiving IP addresses. We temporarily resolved the issue by downgrading to the A5 version.

Expand  

@eralde Is there any progress on this issue? Client devices are unable to obtain an IP address from Buddy6 with A6

[eralde]

  On 11/20/2024 at 7:21 AM, ru.celebi said:

@eralde Is there any progress on this issue? Client devices are unable to obtain an IP address from Buddy6 with A6

Expand  

Please check if 4.3 Alpha 6.1 solves this problem.

[ru.celebi]

  On 11/20/2024 at 7:33 AM, eralde said:

Please check if 4.3 Alpha 6.1 solves this problem.

Expand  

This morning, I tried 4.3.A6.1, but the issue persists.

Edited November 20, 2024 by ru.celebi

[KYTECHNGAMING]

  On 11/20/2024 at 7:56 AM, ru.celebi said:

This morning, I tried 4.3.A6.1, but the issue persists.

Expand  

Yes. The problem continues.

[Leshiyart]

fix in CLI interface mac address factory wan
after updates and apply system save configuration

[KYTECHNGAMING]

  On 11/20/2024 at 9:04 AM, Leshiyart said:

fix in CLI interface mac address factory wan
after updates and apply system save configuration

Expand  

just enter the command on extender?

interface devicemacaddress factory wan
system configuration save

 

 

[KYTECHNGAMING]

KeeneticOS 4.3.A.6.2 - Fixed