Mesh Device Configuration Issues After 4.3 Alpha 6 Update

[ru.celebi]

After updating to version 4.3 Alpha 6, I noticed the following issues:

• The Buddy 6 mesh device does not display the settings for the Home segment.

• The Hero mesh device shows the Home segment settings as locked, which seems to be a bug.

Additionally, since our mesh device might be operating in wired mode, it should be possible to adjust the 2.4GHz channel independently from the controller.

Greetings from Türkiye, together with @KYTECHNGAMING

[ru.celebi]

Edit: With the A6 update, clients connected to Buddy6 are not receiving IP addresses. We temporarily resolved the issue by downgrading to the A5 version.

[eralde]

21 час назад, ru.celebi сказал:

After updating to version 4.3 Alpha 6, I noticed the following issues:

• The Buddy 6 mesh device does not display the settings for the Home segment.

Thank you for the report, that is a bug in Alpha 6. It will be fixed in a future version.

 

21 час назад, ru.celebi сказал:

• The Hero mesh device shows the Home segment settings as locked, which seems to be a bug.

That is not a bug. Extender settings that are configured by the controller are locked in the extender web UI.

However, at the moment some Wi-Fi parameters are still configurable only via the extender web UI, you can see them if you click on the “Advanced Settings” link in your screenshot.

 

21 час назад, ru.celebi сказал:

Additionally, since our mesh device might be operating in wired mode, it should be possible to adjust the 2.4GHz channel independently from the controller.

Basic Wi-Fi settings on the extender (SSID / Network protection / Password / ...) in both bands are synchronized with the controller. This is part of the Mesh Wi-Fi system design.

[ru.celebi]

On 11/19/2024 at 8:07 AM, ru.celebi said:

Edit: With the A6 update, clients connected to Buddy6 are not receiving IP addresses. We temporarily resolved the issue by downgrading to the A5 version.

@eralde Is there any progress on this issue? Client devices are unable to obtain an IP address from Buddy6 with A6

[eralde]

11 минуту назад, ru.celebi сказал:

@eralde Is there any progress on this issue? Client devices are unable to obtain an IP address from Buddy6 with A6

Please check if 4.3 Alpha 6.1 solves this problem.

[ru.celebi]

23 minutes ago, eralde said:

Please check if 4.3 Alpha 6.1 solves this problem.

This morning, I tried 4.3.A6.1, but the issue persists.

Edited November 20 by ru.celebi

[KYTECHNGAMING]

11 minutes ago, ru.celebi said:

This morning, I tried 4.3.A6.1, but the issue persists.

Yes. The problem continues.

[Leshiyart]

fix in CLI interface mac address factory wan
after updates and apply system save configuration

[KYTECHNGAMING]

3 hours ago, Leshiyart said:

fix in CLI interface mac address factory wan
after updates and apply system save configuration

just enter the command on extender?

interface devicemacaddress factory wan
system configuration save

 

 

[KYTECHNGAMING]

KeeneticOS 4.3.A.6.2 - Fixed