KYTECHNGAMING

Thanks, I am following your thread of course. Now I am downloading 1 download + 1 seed. There is no problem. But sometimes problem occurs even single file. Transmission write a lot of log in syslog. I tried to suppress transmission logs, that is not fixed the issue. Telegram admin told me is that related about new ntce dpi.

When I tried with 3.7.4 a little while ago, I encountered the same situations. Do you have ntce installed?

then you should send the product for warranty as the admin wrote. 😐

Did you check the wires inside the ports? Sometimes we can't predict what might happen without realizing it. This is my 2 year old laptop. I use very few ethernet cables and I disassemble them very carefully.

BEFORE AFTER Example of my HP notebook (2 years old)

Have you checked that there is no abnormality in the wires of the 3rd port?

Does the same cable provide proper connection on other ports? Have you tried it with the device you plugged into port 3, right?

The ethernet connection speed of devices in KeeneticOS 3.6.12 is visible. (Example: Keenetic Ultra) It does not appear on devices with version 3.7.3. (Example; Keenetic Extra and Keenetic Hero DSL)

Will there be a multilingual user interface option in future plans? I hope there will be a Turkish interface.

With 3.7.3, the CPU usage is 90%+ in torrent usage. I've been following for a week. With a torrent file attached, as the speed increases, I get more CPU usage and timeout messages. If 3-5 torrents are already attached, the CPU will peak in a much shorter time. Not sure, but there may be a connection issue with public trackers as well, which seems to increase CPU usage in this case. I've never encountered these CPU-related situations before, even when downloading and uploading multiple times at the same time. Despite these, I have no problems with my internet access. The modem does not reboot either. It can work like this for hours. Only interface access hangs. What is the situation with you?

I do not use Turkish letters in network names. And all capital letters. Manual sorting would be nice. I should be able to sort my other networks after my home networks.

Hello! Yes, fixed columns will be limiting. For example, all columns are active, but when necessary, I may want to see more of the column which I want "name" , "host", ... ect.

Hello Julia, One of the reasons for this request is that the name sorting is not working properly. I think the sorting is by date of network added. I can't line up my two meshes that start with Y. For this reason, I think it would be flexible to be able to manually sort the network for the user. By the way, I am authorized to monitor many networks. This is why prioritization works for me.

DOT is active again.

I have not been experiencing the problems we have written above for more than 10 days. Disk / partition does not disappear when the router is turned off and on or suddenly. A new USB hub seems to have fixed the issues. But I had a similar situation recently when I re-inserted my OPKG disk after safe removal. The disc did not appear. Looks like the xhci(?) driver isn't clearing the registers properly when ejecting disks on a hub. @Le ecureuil Thanks for all.

Yes, you're right. @Alex Sh. Admins can move the topic under the relevant forum topic if necessary. If you examine my screen recordings below, the situation will be understood. The mobile app pulls the data. (I could not try changing the PPPoE description from the mobile application due to the error in the program.) But I don't know if there is a problem while pushing data. You will see CLI commands and outputs. In example; The description is deleted by changing the SNR setting. Maybe it changes with other settings. But as I wrote before, it was deleted without even touching any settings. Also, during video recording, I saw that the previously unchanged area now changes in that interface. When PPPoE1 changes, DSL changes too. Otherwise not. When DSL changes, PPPoE1 does not change. @Le ecureuil https://streamable.com/ahe3q4 https://streamable.com/216613

Hi Alex, We replace this description with the CLI command. I just realized that it references here in the app. The DSL connection name (provider name) in the interface does not correspond here. It is obvious that the changes are also saved within the application. I don't know if this is related to the application or the modem software. That's why I tagged both you and @Le ecureuil I will change the value from within the app. I will change and save a dsl setting later. I will reboot the device immediately. Let's see if I can catch it. But I would like to point out again; The description changes, it also shows in the application. Even if no settings are changed, this description is deleted for some reason. In @eralde 's theme plugin, it seems that the corresponding value in the dsl part was different. Sorry, I couldn't try because there is app crash in dsl pppoe menu. (We reported on the Telegram channel.)

This thread may help to observe the same situation.

Hello there, In my first post, many of these cases were actually tested as present. In 3.6.10 and 3.7.x versions, the description is deleted in the same way without realizing it. Without changing any settings, we see that there is no description, sometimes on the first reboot, sometimes after 2-3 reboots.

🤞🙏 I have never tried to set it from the mobile application. I set the description of DSL with the command in the Web CLI. But I don't know why it is deleted. And the situation only occurs for DSL connections. There is no such problem in the descriptions of Fiber/Ethernet providers.

3.8 🧿

Offline device can be indicated with a "-" sign or written "offline".

I know which package is making this situation. I think I made a mistake in the opkg tvheadend config. When I turn off the service, the CPU usage also returns to normal. In my next message, I will share the outputs you want confidentially. Both at normal and 99% CPU usage.

Another observation: Timeout, which occurs during 98-99% CPU usage, is also locally available in the browser. The interface remains at 99% and is already starting to slow transitions. Even if the CPU usage drops, it is necessary to renew the interface. @Le ecureuil

Additional indications: