Jump to content

yerebakan

Forum Members
  • Posts

    229
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by yerebakan

  1. I have not been experiencing the problems we have written above for more than 10 days. Disk / partition does not disappear when the router is turned off and on or suddenly. A new USB hub seems to have fixed the issues. But I had a similar situation recently when I re-inserted my OPKG disk after safe removal. The disc did not appear. Looks like the xhci(?) driver isn't clearing the registers properly when ejecting disks on a hub. @Le ecureuil Thanks for all.
  2. http://keenetic.emulator.keenetic.pro/ User : demo Pass : demo
  3. Yes, you're right. @Alex Sh. Admins can move the topic under the relevant forum topic if necessary. If you examine my screen recordings below, the situation will be understood. The mobile app pulls the data. (I could not try changing the PPPoE description from the mobile application due to the error in the program.) But I don't know if there is a problem while pushing data. You will see CLI commands and outputs. In example; The description is deleted by changing the SNR setting. Maybe it changes with other settings. But as I wrote before, it was deleted without even touching any settings. Also, during video recording, I saw that the previously unchanged area now changes in that interface. When PPPoE1 changes, DSL changes too. Otherwise not. When DSL changes, PPPoE1 does not change. @Le ecureuil https://streamable.com/ahe3q4 https://streamable.com/216613
  4. Hi Alex, We replace this description with the CLI command. I just realized that it references here in the app. The DSL connection name (provider name) in the interface does not correspond here. It is obvious that the changes are also saved within the application. I don't know if this is related to the application or the modem software. That's why I tagged both you and @Le ecureuil I will change the value from within the app. I will change and save a dsl setting later. I will reboot the device immediately. Let's see if I can catch it. But I would like to point out again; The description changes, it also shows in the application. Even if no settings are changed, this description is deleted for some reason. In @eralde 's theme plugin, it seems that the corresponding value in the dsl part was different. Sorry, I couldn't try because there is app crash in dsl pppoe menu. (We reported on the Telegram channel.)
  5. This thread may help to observe the same situation.
  6. Hello there, In my first post, many of these cases were actually tested as present. In 3.6.10 and 3.7.x versions, the description is deleted in the same way without realizing it. Without changing any settings, we see that there is no description, sometimes on the first reboot, sometimes after 2-3 reboots.
  7. 🤞🙏 I have never tried to set it from the mobile application. I set the description of DSL with the command in the Web CLI. But I don't know why it is deleted. And the situation only occurs for DSL connections. There is no such problem in the descriptions of Fiber/Ethernet providers.
  8. Offline device can be indicated with a "-" sign or written "offline".
  9. I know which package is making this situation. I think I made a mistake in the opkg tvheadend config. When I turn off the service, the CPU usage also returns to normal. In my next message, I will share the outputs you want confidentially. Both at normal and 99% CPU usage.
  10. Another observation: Timeout, which occurs during 98-99% CPU usage, is also locally available in the browser. The interface remains at 99% and is already starting to slow transitions. Even if the CPU usage drops, it is necessary to renew the interface. @Le ecureuil
  11. Maybe it's a known issue. When CPU and memory usage increases, timeout problem becomes inevitable. There is no problem in network and internet usage.
  12. https://rmm.keenetic.com/network/list (sorting issue) https://rmm.keenetic.com/network/detail/123x/devices (sorting ok)
  13. https://rmm.keenetic.com/network/detail/xyz/devices When some fields on or off state...
  14. from my 4 different extender of ultra's 😃 and main of Peak DSL
  15. This time the usb is seriously injured. 🙃
  16. I am using 5v 5a adapter for usb hub. The modem is plugged in and the switch is not active. Also, ping check is disabled in the settings. I think it might be better to buy a new usb hub or remove the modem.
  17. Wow! I've realized now. The disc was gone again at around 6 in the morning. I/O failure hub or disk? I think this recording is what you want to tell me. But on the same hub, the OPKG disk continues to work without any problems. 10.101.0.1 Oct 2 06:06:31 10.101.0.1 kern info kernel usb 1-2.4: reset high-speed USB device number 10 using xhci-mtk 10.101.0.1 Oct 2 06:06:31 10.101.0.1 kern err kernel usb 1-2.4: device descriptor read/64, error -71 10.101.0.1 Oct 2 06:06:32 10.101.0.1 kern info kernel usb 1-2.4: reset high-speed USB device number 10 using xhci-mtk 10.101.0.1 Oct 2 06:06:32 10.101.0.1 kern warning kernel usb 1-2.4: Device not responding to setup address. 10.101.0.1 Oct 2 06:06:33 10.101.0.1 kern info kernel usb 1-2.4: reset high-speed USB device number 10 using xhci-mtk 10.101.0.1 Oct 2 06:06:33 10.101.0.1 kern err kernel usb 1-2.4: device descriptor read/all, error -71 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: reset high-speed USB device number 10 using xhci-mtk 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: device firmware changed 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: USB disconnect, device number 10 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern err kernel Aborting journal on device sdc1-8. 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern err kernel JBD2: Error -5 detected when updating journal superblock for sdc1-8. 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x2a 2a 00 00 03 4e 58 00 00 08 00 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern err kernel blk_update_request: I/O error, dev sdc, sector 216664 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel EXT4-fs warning (device sdc1): ext4_end_bio:307: I/O error -5 writing to inode 13 (offset 0 size 0 starting block 27084) 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern err kernel Buffer I/O error on device sdc1, logical block 26827 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern crit kernel EXT4-fs error (device sdc1) in ext4_writepages:2810: IO failure 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel EXT4-fs warning (device sdc1): ext4_end_bio:307: I/O error -5 writing to inode 13 (offset 0 size 0 starting block 27084) 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern err kernel Buffer I/O error on device sdc1, logical block 26827 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel sd 2:0:0:0: [sdc] Stopping disk 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel sd 2:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x01 driverbyte=0x00 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: new high-speed USB device number 11 using xhci-mtk 10.101.0.1 Oct 2 06:06:34 10.101.0.1 user info ndm Core::FileSystem::Repository: unregistering "29bf1f34-afcb-4e89-b976-0e9033e236fe:" filesystem... 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: New USB device found, idVendor=0930, idProduct=6544 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: Product: TransMemory 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: Manufacturer: TOSHIBA 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb 1-2.4: SerialNumber: 001D92AD6BE2C96093800AAA 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel usb-storage 1-2.4:1.0: USB Mass Storage device detected 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern info kernel scsi host3: usb-storage 1-2.4:1.0 10.101.0.1 Oct 2 06:06:34 10.101.0.1 user info ndm Ntce::Database: cleared classification data. 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern crit kernel EXT4-fs error (device sdc1): ext4_journal_check_start:56: Detected aborted journal 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern crit kernel EXT4-fs (sdc1): Remounting filesystem read-only 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel ------------[ cut here ]------------ 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel WARNING: CPU: 3 PID: 15846 at fs/fs-writeback.c:2197 __mark_inode_dirty+0x264/0x284 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel bdi-block not registered 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel Modules linked in: eip93_cryptoapi(O) nf_nat_sip nf_conntrack_sip fastvpn(PO) xhci_mtk xhci_hcd nf_nat_ftp nf_conntrack_ftp zram ntc(PO) ensoc_dsl(PO) ensoc_dmt(PO) ensoc_flt(O) nnfm(O) mt7615_ap(PO) ubifs ubi ensoc_eth(PO) nacct(PO) rndis_host qcserial cdc_ether huawei_cdc_ncm asix qmi_wwan option cdc_ncm ccm usb_wwan usbextras(O) gcm seqiv authenc exfat(O) nls_utf8 esp4 zstd kalmia cp210x thfsplus(O) nf_nat_rtsp(O) nls_cp1251 cypress_m8 ax88179_178a usb_storage cdc_acm l2tp_ppp usblp dm9601 sd_mod sr_mod nls_cp437 sierra sg usbnet ext4 tfat(PO) zstd_decompress xfrm_user deflate nls_cp866 chacha20poly1305 echainiv tntfs(PO) af_key pl2303 jffs2 cdc_wdm ghash_generic r8152 l2tp_core rtl8150 zstd_compress aead ftdi_sio ch341 usbserial nf_nat_pptp nf_nat_h323 usbcore nf_conntrack_pptp wireguard 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel xfrm_interface crc32c_generic libphy cdrom tunnel6 resetnds(PO) hmac des_generic mtdoops_proc(O) ansi_cprng ctr jitterentropy_rng gf128mul nf_conntrack_h323 xt_esp chacha_generic zlib_deflate jbd2 nls_base ip6_udp_tunnel poly1305_generic xxhash sch_cake(O) nf_conntrack_proto_gre phr(PO) mbcache nf_conntrack_rtsp(O) xt_policy ndm_storage dummy ip_gre zlib_inflate crc16 loop xfrm4_mode_tunnel md5 scsi_mod udp_tunnel crypto_null xfrm4_mode_transport cbc tsmb(PO) drbg usb_common sit nf_nat_proto_gre xfrm_algo xfrm4_tunnel 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel CPU: 3 PID: 15846 Comm: syslog-ng Tainted: P O 4.9-ndm-5 #2 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel Stack : 00000000 00000000 80528152 00000048 00000048 80528150 8045d2c0 00000009 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel 80444f38 830d6f8c 804b4e83 80523ecc 00000895 00000000 77bfeb18 77c05000 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel 77c05000 8008de54 00000000 0000000a 80528152 00000000 8044ae28 8aef7c2c 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel 8044d404 8008b048 00000895 00000000 00000003 00003de6 8aef7c2c 80444f38 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel ... 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel Call Trace: 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<f3332257>] show_stack+0x2c/0x88 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<8a339aee>] dump_stack+0x9c/0xd4 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<8c645cd5>] __warn+0xe0/0x114 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<04186378>] warn_slowpath_fmt+0x34/0x40 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<0a9ce964>] __mark_inode_dirty+0x264/0x284 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<91040a7c>] generic_update_time+0xa4/0x104 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<0cafa713>] file_update_time+0xc0/0x130 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<75c39b06>] __generic_file_write_iter+0xb8/0x280 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<674566b3>] ext4_llseek+0xb6c/0xf9c [ext4] 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel [<13864622>] ep_scan_ready_list.constprop.0+0x98/0x21c 10.101.0.1 Oct 2 06:06:34 10.101.0.1 kern warning kernel ---[ end trace a57548a6aa657f34 ]--- 10.101.0.1 Oct 2 06:06:34 Keenetic-0615 syslog err syslog-ng[917] I/O error occurred while writing; fd='5', error='Read-only file system (30)' 10.101.0.1 Oct 2 06:06:34 Keenetic-0615 syslog notice syslog-ng[917] Suspending write operation because of an I/O error; fd='5', time_reopen='60' 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel ndm (15856): drop_caches: 3 10.101.0.1 Oct 2 06:06:35 10.101.0.1 user err ndm Core::FileSystem::Native: unable to disable swap: no device found. 10.101.0.1 Oct 2 06:06:35 10.101.0.1 user info ndm Storage::Manager: "Media2": unregistered partition "29bf1f34-afcb-4e89-b976-0e9033e236fe:". 10.101.0.1 Oct 2 06:06:35 10.101.0.1 user info ndm Storage::Manager: "Media2": removed partition "29bf1f34-afcb-4e89-b976-0e9033e236fe:". 10.101.0.1 Oct 2 06:06:35 10.101.0.1 user info ndm Core::FileSystem::Repository: unregistering "144c8094-b6cc-4e2c-b39d-a5fe18b4948c:" filesystem... 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel scsi 3:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 2 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: Attached scsi generic sg2 type 0 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] 7823296 512-byte logical blocks: (4.01 GB/3.73 GiB) 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] Write Protect is off 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] Mode Sense: 65 44 09 30 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] No Caching mode page found 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] Assuming drive cache: write through 10.101.0.1 Oct 2 06:06:35 10.101.0.1 kern info kernel sd 3:0:0:0: [sdd] Attached SCSI removable disk 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user err ndm Core::FileSystem::Native: failed to unmount "/tmp/mnt/144c8094-b6cc-4e2c-b39d-a5fe18b4948c": device or resource busy. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user err ndm Storage::Partition: failed to unmount. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user info ndm Storage::Manager: "Media2": unregistered partition "144c8094-b6cc-4e2c-b39d-a5fe18b4948c:". 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user err ndm Core::FileSystem::Native: failed to unmount "/tmp/mnt/144c8094-b6cc-4e2c-b39d-a5fe18b4948c": device or resource busy. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user crit ndm FileSystem::Directory: system failed [0xcffd00ec], unable to remove "/tmp/mnt/144c8094-b6cc-4e2c-b39d-a5fe18b4948c": device or resource busy. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user info ndm Storage::Manager: "Media2": removed partition "144c8094-b6cc-4e2c-b39d-a5fe18b4948c:". 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user crit ndm Storage::Manager: "Media2": a media was unsafely unplugged without ejecting. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user info ndm Storage::Manager: removed "Media2", port 2. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user info ndm Storage::Manager: "Media3": enabled a disk spin down. 10.101.0.1 Oct 2 06:06:49 10.101.0.1 user info ndm Storage::Manager: created "Media3", port 2. 10.101.0.1 Oct 2 06:07:34 Keenetic-0615 syslog notice syslog-ng[917] Error suspend timeout has elapsed, attempting to write again; fd='5' 10.101.0.1 Oct 2 06:07:34 Keenetic-0615 syslog err syslog-ng[917] I/O error occurred while writing; fd='5', error='Read-only file system (30)' 10.101.0.1 Oct 2 06:07:34 Keenetic-0615 syslog notice syslog-ng[917] Suspending write operation because of an I/O error; fd='5', time_reopen='60' 10.101.0.1 Oct 2 06:08:34 Keenetic-0615 syslog notice syslog-ng[917] Error suspend timeout has elapsed, attempting to write again; fd='5' 10.101.0.1 Oct 2 06:08:34 Keenetic-0615 syslog err syslog-ng[917] I/O error occurred while writing; fd='5', error='Read-only file system (30)' 10.101.0.1 Oct 2 06:08:34 Keenetic-0615 syslog notice syslog-ng[917] Suspending write operation because of an I/O error; fd='5', time_reopen='60' 10.101.0.1 Oct 2 06:08:46 10.101.0.1 user info ndm Core::Scgi::AuthPool: cleanup: 15 -> 14. opkg disk is mounted on the same hub and usb modem. @Le ecureuil
  18. It is very rare that my OPKG disk in the same hub is not visible after restarting the modem. Very rare though. In this case, I just have to unplug the usb and plug it back in. But in case of lost partition, re-mounting it doesn't work. I need to remove /tmp/3947347kdfdnf path from SMB.
  19. Good news 💙🤞 But my problem description was other previous message which it is quoted below. Why is partition lost? When checking partition, no such issue. I will record a video if it will be happen again.
  20. I've been observing the situation for a long time. Thought it was fixed, after a while, it also happened that it could not connect other than 2.4 ghz. I even bought the ZYXEL NWD6602 AC1200 Dual-Band Wireless Nano USB Adapter. It also came out with Realtek 8812BU chipset. I've been through similar situations. We are also monitoring the situation with Keenetic TR RD. The other day I saw that my notebook wifi card driver had a new update. Version number: 2024.0.10.133 Release date: 23.08.2021 For 2 days, when I checked the wifi connection after turning the router and laptop off and on, waking up from sleep mode, I haven't seen it connect at 2.4ghz yet. It can connect at 5ghz.
  21. This question point the same issue which I informed.
  22. I think it was temporarily issue. I saw a few errors in the plugin settings. I will send it soon if @eralde wants.
×
×
  • Create New...