KYTECHNGAMING

Ofis ana modem 192.168.10.1 - modem Extra : 192.168.2.1 - router Lite : 192.168.1.x 'ten meshteler - tekrarlayıcı yada erişim noktası modunda bura kadar tamam. Noktadan noktaya transfer ettin. City IP bloğu ve modu nedir? Ekran görüntüsündeki Lite, ofis tarafındaki. Dİğer tarafın ip ve kurulum detayları nedir?

components remove acl components commit ok. test is starting.

Hi @vst I didn't make any setting changes. I upgraded to Keenetic 4.0.A.15. I can say "yes" to the answer to your question. Dailybackup is active. It reboots once a day in xx:20 time zone. On the other hand, the other camera transfers hourly backups via smb. - There is a separate user authorization for SMB access. (I think you asked me to try without ACL in your previous message. So should I give folder permission with the admin user? If you get back to me about this, I can also perform the tests you want.)

It seems so complicated that it is forgotten while trying to read and understand it. What are your DHCP blocks? What are the installation modes of the devices? There is probably a typological error. ------------------------------------------------------------------------------------- O kadar karışık görünüyor ki, okuyup bir yandan anlamaya çalışırken unutuluyor. DHCP bloklarınız nedir? Cihazların kurulum modları nedir? Muthemelen tapolojik hata mevcut.

🧿 https://prnt.sc/WrZydaHx0wKw Reboot again

Hello, I've been making observations for the problem for 1-2 days. And I thought I didn't write some things. I'm accessing the network disk for file transfer to mi cameras with a different user in keenetic. (I think you already wrote ACL because of this.) This user only has SMB privileges and permissions to that disk/folder. (Are you suggesting that I access it with admin?) There are two of these cameras. Both create separate folder tree. The settings are exactly the same. Only the backup syncs are different. Hourly vs Daily Same sdcards mounted. There is no problem recording to SDcard. Although the technical data writes that the support is maximum 32gb sdcard, 128gb sdcard works. They are connected to the same repeater on my Keenetic Mesh system. https://prnt.sc/Qm9tgBmcwmwh One of them continues the backup to the same disk properly..(Misak) The other one has already stop the backup along with the reboot issue.(Lal) See the dates of the files in the most recent folders in SMB. (2. folder @ x-plore video) https://disk.yandex.com.tr/i/tKNSVv5NRjht3Q I turned off a feature in the Mi settings about 48 hours ago. He's not making a backup. Anyway, I don't understand exactly what the setting says, either. https://disk.yandex.com.tr/i/R9gQ8s2JjNiZJA But the restart problem seems to have disappeared now. - I'm not sure, but the camera that created this reboot problem also reboots itself. Just like I couldn't access the videos on the sdcard while recording the phone screen, while writing this article, I noticed that Keenetic was offline in the device list and online after a while. - The screen recordings also recorded music in the background. Don't forget to turn down the video volume.

Hello @vst I use two of this model. Xiaomi Mi 360° Home Security Camera 2K (MJSXJ09CM) Link FW: 4.1.6_0310

As soos as possible 🙏

Send link via hidden message in 30 seconds.

it is 600mb

@sergeyk Rebooted again at 22:20 Send pcap file to you? https://prnt.sc/gqB4LwdG8pQu Upload to yandex?

Thanks, I will do. Reboot again 40 mins ago. Capturing : https://prnt.sc/H0pgrfgwAfMI

20:20 reboot again. But I guess tcpdump did not work. I could not reach any output. Just log. https://prnt.sc/9GwzfYBkZW_F

tcpdump installed. I started the command as follows. https://prnt.sc/XmgjzXZOa7nk The .pcap file was created on disk, but its content is empty. Is he listening now? Isn't it this way?

In the previous message, I showed that the 1st camera was stuck in the past date and time.. @sergeyk I set the sync to "Live" to see if we can trigger the issue. At 13:20 the syslog record was captured. Router restarted. (Also, no recording has been transferred to my disk.) https://prnt.sc/Mng0ahPTdf-a Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: crit Tag: kernel Message: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 9ac62b40, ra == 9ac523c0 Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: warning Tag: kernel Message: Oops[#1]: Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: warning Tag: kernel Message: CPU: 0 PID: 718 Comm: vfs-ctrl-650e00 Tainted: P O 4.9-ndm-5 #0 Why is the date and time sorting messed up in syslog? log time: https://prnt.sc/h9StW35odgvG https://prnt.sc/le1G9a2n4VW5

It's a really interesting situation. 2 different Mi cameras. They have different synchronous scheduling and write data to the same disk. One of them stopped writing. Could the problem be with the disk? Did the bad sector coincide with the area? It also keeps recording on internal sd-card. 1. camera https://prnt.sc/EyiXkLgQtZ2D 2. camera https://prnt.sc/07BZ-FJVM6MZ

Thanks to you, we got closer to the source of the problem. I didn't set it to sync to this time.But his latest backup seems to be stuck here too. https://prnt.sc/OWUfADL6u5Ba

Hello sergeyk, Yes, I don't have any scheduler. It has been going on for 4 nights. I'm going to open syslog today. According to your findings; At that hour, I think it might just be my Mi camera transferring its backup to disk.

The reboot situation also occurred tonight. https://prnt.sc/aLmCxfMNCS6k

Could it be triggered by the server for the EU variant? In one of the last updates, I was asked to choose a region and I did it. Just a thought.

Hello, I am using KN-1011-EU. The other day, I noticed that the system uptime and WAN IP are different when WG tunnel is not working. I did a check last night. One day after installing 4.0.A.13, the main router would reboot at the same time every night. 03:21 AM There is a reboot action for 3 nights. It was 5:30 AM when I took the self-test last night. Shared privately. Mobile App Events: https://prnt.sc/UdtNjez27gl_ https://prnt.sc/9h6omMLjKT4K https://prnt.sc/1C1yJbbdY9F1 Logs: https://prnt.sc/fDi3BAsl_Hn5 https://prnt.sc/0kVjoZbKXors (SOC power status - not sure if it shows physical or software.)

@Danya @StanislavP

I hope you will follow the thread I opened earlier. I could not understand the regional differences. @Danya @StanislavP

Follow this topic https://forum.keenetic.com/topic/15940-отвал-ретрансляторов-на-версии-4011/?do=findComment&comment=161579

We received 2-3 similar feedbacks in our Turkish Telegram user group.