Jump to content

KYTECHNGAMING

Forum Members
  • Posts

    710
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by KYTECHNGAMING

  1. KeeneticOS is cloud based software/GUI. You can access your ap/extender on cloud tunnel. For your use, it will be more accurate to use wirelessly in WISP mode in router mode or in provider mode in wired mode.
  2. Besides many users who receive private ip service, I receive public ip service. So I have direct access. But every time I restart the modem, this ip changes. For this reason, I cannot give the same IP address that we want to make a firewall rule. In the example below, is it possible to use KeenDNS instead of the IP address? Can this be achieved by agreement of the two Keenetics over the cloud? Example: I use Keenetic at my company and home. The computer at my company is only for accessing via my Keenetic which is the public ip service at my home. https://prnt.sc/26ppi5d
  3. If the channel setting of the Keenetic home network is set to a fixed channel instead of an automatic channel for 2.4 GHz or 5 GHz, the connection to the wireless devices on the opposite side is not provided.
  4. The VPN client works by routing the client's traffic to the VPN provider. Router mode: All Yes AP or Extender mode: All No https://prnt.sc/26o3cnv
  5. You need to use Viva/Skipper in router mode for VPN and all connection types.
  6. No. You need to register static ip from your ISP.
  7. https://prnt.sc/26hbhh8 & https://prnt.sc/26hbhlv I guess you want this for repeater/ap mode and with a simple switch? / In this request, devices are evaluated without being included in the mesh system, right?
  8. Basically, this settings can be operated on main router/modem? Can you ignore Mac or subnet to reach gateway ex 192.168.1.1 ?
  9. You can create a firewall rule for segments. Example from @PriSonerS61 None of the clients connected to the guest network can reach the gui. https://prnt.sc/26gyv2y
  10. Maybe you can do it with opkg + tor
  11. If auto update is on, devices will update themselves. In the near future, it will be possible to take collective actions via RMM. such as reboot and update. 🙏
  12. Slow for downloading update? Every time, FW is collected with all components and signed. The update will take ~2-3 minutes to install.
  13. I got it, I got some information from Keenetic TR R&D about the arrangement of layer names. It was in my support case about deleting that PPPOE description on DSL connections. 🙏💙🤞
  14. is it same? https://prnt.sc/2617auj
  15. Thank's for the information. I kept hwnat turned off for the traffic analyzer to work efficiently. I have read in the articles. In this bandwidth, I will either choose one or both. https://help.keenetic.com/hc/en-us/articles/4404928268818
  16. Then I just need to activate hwnat. I just use it. The built-in traffic shaper will also do its job. I won't be able to use the usage analyzer with the R&S Pace2.
  17. So, ntce's data processing algorithm is overloading the processor at these speeds? Did I get right?
  18. I observed a difference between using ntce and hwnat on my new 1000mbps line. I am not sure if it is necessary to use ntce in this bandwidth. But still, this blocking of the speed in the traffic engine gave rise to the thought that there is a problem. - Keenetic Hero DSL (KN-2410) - KeeneticOs 3.8.A.1 https://streamable.com/q0cf4f NTCE Off / HWNAT On / Wired / Service Class "Default" https://prnt.sc/25r2uw2 NTCE On / HWNAT Off / Wired / Service Class "Default" https://prnt.sc/25r2yss NTCE Off / HWNAT Off / Wired / Service Class "Default" https://prnt.sc/25r34ak
  19. You need to add DNS servers while switch is disabled on "DNS servers supplied by internet connections" like this https://prnt.sc/25ocphu You need to configure your dns, dot and doh manually if you dont use any public dns or ready-to-go nextdns component. Ex: https://prnt.sc/25ocxx0 , https://prnt.sc/25od49g , https://prnt.sc/25odbu6 I used Nextdns Service. So nextdns is automatically add dns, dot and doh on my connection. nothing is broken... https://prnt.sc/25odw1z , https://prnt.sc/25oe14d
  20. Dsiabling "DNS server ......." means that not use ISP DNS. If you dont enter some DNS, you get an connection issue.
  21. Which DNS list provider? Do you use DNS-override via OPKG? Built-in NextDns seems like that. https://prnt.sc/2477xmu
  22. Look previous message. I send message to him. 🙃
  23. You can install browser extension. https://forum.keenetic.com/topic/7533-ночная-тема-расширение-браузера/#comment-84350
×
×
  • Create New...