KYTECHNGAMING

when you exit the wizard, it stays in the version it should be. I did not understand why an experienced person is so stuck in this situation in the installation with the wizard. Or I don't quite understand what you want to say. Could it be a solution to remove the initial wizard component?

https://prnt.sc/lKft3JN2-M-L https://prnt.sc/df8AQIVuwQMb Because I use it this way on my other device. This is for local network only.

Hello there, When I want to send many files to disk in the file browser, there is no scroll bar on the page that opens. It causes the progress not to display properly. https://prnt.sc/SMlizzSfKthK the other is that the new PPPOE button in the mobile browser does not fit in Turkish. https://prnt.sc/jOW6NYz1r9Fl @eralde

Yeah. I disassembled a heatsink. In this photo, the module was not fully inserted. https://prnt.sc/I8KuwQxn6sVW If I used the Keenetic upright and rotated the antenna it would be fine. That's why I made the heatsinks that way. But my plan has changed. However, I wish the sfp input and antenna weren't so close by design.

Hello, This issue may not have been fixed. Keenetic_DATA - f3cff6b6-fe95-d701-0085-f6b6fe95d701 Keenetic_Data - 4b6ce681-0d37-442e-82fb-c9c89b3cf249 I wanted to change disk. I'll use the one starting with 4b instead of the one starting with f3. I inserted both disks into the Keenetic. I also removed the disks from SMB beforehand. I authorize access to disks. One is not accepted. Image of the two disks in the interface: https://prnt.sc/vqiwpKyJZyF4 Screen Record: https://disk.yandex.com.tr/i/qXclBGqGC-gM6w

It's because it's a twin sim card. So the other sim card was active. Otherwise, I don't have a connection problem. When I took the self-test, it had ip. After 30 seconds, I saw that it was broken. As I said in my first sentence, because of the twin sim card. When available, I can try with only one sim card active. 3g bands are inefficient in Türkiye and even do not receive data. That's why the bands that I can use are selected. I checked with cellmapper before.

KN-1011 - ODI and Carlitoxx https://prnt.sc/bRbujWhnsq9n

KN-1011: https://prnt.sc/KnagJ8CnQXE3 KN-2510: https://prnt.sc/y-ZA-0FIGGIe

Everything seems to be fine with 3.9.a.5. @Julia Rybakova

Hello, I'm not sure my provider supports ipv6. I wanted to enable ipv6 and see results. but I observed that the button does not register. I re-entered the commands in webcli. an ipv6 address was not obtained as a result. Self-test will be forwarded in the next message.

Hello, I am doing the PPPOE information test of different Keenetic models with different routers. In the Hero KN-1011 model, information is received on the interface, but the window does not close. For this reason, you cannot save the received information. https://prnt.sc/2UAliKoc0CCn My ticket number about the results of other tests: 591186 @eralde @Le ecureuil

I noticed that with KeeneticOS 3.9.a.5, Ipv6 is not activated in modem settings. I entered the commands with the CLI. I can't see any sign that it's active again in the interface. https://prnt.sc/snKQbeRh4gHT The button is not selected. Also, there is no line about ipv6 under ipv4 in the dashboard. If the rope is not provided; it may not come out. I do not know this. https://prnt.sc/rg4mHtgcpMcg

https://prnt.sc/EMN9y4Dy4CiY https://prnt.sc/LG6j8Tp2I40C https://help.keenetic.com/hc/en-us/articles/360016127780-Keenetic-Mesh-Wi-Fi-System-frequently-asked-questions-

The reason for the problem of not receiving sms in Runner 4G, 3.9.a versions has been changed to 3.8.3 version. It appears online in RMM. But this time another network has gone offline. Keenetic Hero with KeeneticOS 3.9.a.4. I noticed it in version 3.9.a.3 too. But after a while, it became online by itself. https://prnt.sc/aRlD7d4TExRd

Clear browser's cookie.

You can see bssid on your phone with various Wi-Fi analyzer programs.

With the 3.9.a.2 update on the Runner 4g model and now the 3.9.a.3 update on my Hero model, my networks appear offline in RMM. Also, I am currently using 3.8.x version because I have sms problem in Runenr 4G. However, KeenDNS addresses were also encountering 502 Bad Gateway errors.

bssid and mac address are slightly different. Enter the following command in CMD while connected to whichever device you need bssid. (Omni DSL) netsh wlan show networks mode=Bssid https://prnt.sc/03U4i2iizioU

Hello, I cannot exit the "event log" page when viewing RMM from my mobile phone. When I do it back, it returns to another page I opened before rmm. https://prnt.sc/D8ohQOAMhUui

5Ghz interface WifiMaster1/WifiStation0 mac bssid baglanacakcihazinbssidsi 2.4 Ghz interface WifiMaster0/WifiStation0 mac bssid omnidslbssid Just enter the command for 2.4ghz on the Lite-1 device. Because your devices only have 2.4ghz AP.

I asked these questions a long time ago with the advice of the manufacturer Carlitoxx.

Wouldn't it be nice if new components in KeeneticOS versions had a sign next to them? If the HTTP(S)/SOCK proxy that came with 3.9.A.1 looked like this, I would have noticed it more quickly. https://prnt.sc/eWB257ON88j3

3.9.A.1 When closing the window in the device setting, the gui looks like this for 1-2 seconds. https://ibb.co/SN2VfRk

Follow this article https://help.keenetic.com/hc/ru/articles/360021888880 or https://help.keenetic.com/hc/en-us/articles/360021214160

I guess it's a hardware failure. 😟 I've heard it 1-2 times before on another model. RD will support you.