KYTECHNGAMING
-
Posts
641 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Posts posted by KYTECHNGAMING
-
-
On 8/8/2022 at 3:41 PM, KYTECHNGAMING said:
Hello,
I'm not sure my provider supports ipv6.
I wanted to enable ipv6 and see results. but I observed that the button does not register.
I re-entered the commands in webcli. an ipv6 address was not obtained as a result. Self-test will be forwarded in the next message.I upgraded my Runner 4g from 3.9.a.5 to 3.9.a.7. I turned on the device for the first time today after posting the latest ipv6 test.
After the upgrade, IPv6 appeared to be checked. I think the problem is fixed. https://prnt.sc/_B02walLRK3O-
1
-
-
Fxied in 3.9.A.7
Thanks Keenetic
Scrool and new frame size : https://prnt.sc/kgDN4051N7l- 👍
I noticed that on my mobile phone Samsung Note5 the button does not appear properly. https://prnt.sc/-oJYDDuoZ6jS
In addition, I have a suggestion to shorten the button name and a scenario change related to it.
In addition to the ethernet port window that opens after the "Kullanıcı Bilgilerime Talep Et" button name, it can be noted that PPPOE information can also be obtained from the ISP. ( "Kullanıcı Bilgilerime Talep Et" = "Request My User Information" )
-
Hi @sips ,
Today I noticed that my voip service has timeout error.
It was already working with VPN routing. I checked VPN is ok.
I tried the secondary sip server. I saw that it gave either timeout or unauthorized error.
Today was a national holiday. I couldn't reach my voip provider.By the way, I am running into this error.
Could it be caused by the 3.9.A.7 software version?
I'm using Linear plugged in via hub.
It can give the same error when removing and plugging. I have also observed that it gives this error even though it is recognized up to the Linear Serial number in the system log. Turning the switch off and on a few times also fixes it. -
-
Ticket ID: #591850
Screen recording added to the request.
-
On 7/29/2022 at 7:16 AM, Artur Akhmerov said:
Hello! Do you find this firmware ? can you share it ?
https://disk.yandex.ru/d/-rQH6Nn1Bm-a1A/(Release Firmware) All Keenetic/RU/Stable
-
1 hour ago, Ahmed Ensar said:
Evet dediğin gibi bende sözleşmeden dolayı hata verdi sanıyorum. mesajı google yamuk çevirmiş 🙂. Sürüm düşürmeye gerek yok benim için şuan internetde bir sorun yok çalışıyor. Sadece turuncu ışık yanıyor.
this will cause keendns services to not work.
-
There may be a situation where the phone is experiencing while on the DFS channel.
What are your Wi-Fi channel settings? -
23 hours ago, Genius8Loci said:
1) Updating and installing selected components
2) Bulk DNS change for selected types of connections
3) Changing Internet availability check (Ping Check)
4) Adding other connections, VPN, etc.
5) Adding network segments, or editing existing ones
6) Changing Internet filters
7 ) Editing firewalls
I can enumerate indefinitely, everything that can be configured on a single device should be done in bulk, the responsibility for errors is on the end userI guess it's a request for a tapology that doesn't use mesh? 🙄
-
1
-
-
Hello,
I noticed it while experimenting with TV+(ISS's IPTV) after a fresh install of Hero DSL (KN-2410).
software version: KeeneticOS 3.8.4A few custom routings were defined, IGMP v3 was selected in the home network.
I noticed that the above features were reset after I made DNS ignore toggle or dns changes.
So routings have been deleted, igmp has been deactivated..
I always saw the same result after 2-3 repetitions. -
-
On 8/16/2022 at 5:12 AM, Sndwchhh said:
After the last update (3.8.4) my Keenetic City router didn't restart itself properly and went offline on mobile app. Although after starting it manually it still didn't show up as online on the mobile app so I tried to link it again but I did not delete the offline one. Once I did that it showed itself as online but after 1 min of being online the situtation turned "being online" to "unable to verify your router, we will lock this router please contact support." I assume it did that because I didn't delete the offline one so it showed up like its duplicated one online and one offline. After all this I deleted both of them from the app, also deleted the app and reset my router to factory settings from the reset button. But now I'm unable to link my router to my phone, deleted the app again restarted the router even to its factory settings. I'm still getting the error that says "Ups, something went wrong." on the link page, it says "authenticating" and this goes either forever or I'm getting the "something went wrong" error. What should I do about it?
Remove old entry and add new one again.
-
8 hours ago, Julia Rybakova said:
Yes, we did! You should monitor Changelog RMM's topic. Post was here
About speed of notifications -sometimes, it not depends on our product. We know about this and we'll try to fixing if it possible.
Send this changelist from the rmm telegram bot as well.
-
Same on all my devices.
Regardless of whether it is a master controller and repeater.
But wifi is ok. -
It would be nice if RMM back up the last good config files on the network homepage.
For example; The keenetic device was physically tampered with. The system has been reset. It would be great to be able to bring it back in a very short time with the latest good config backup.
I went to a client today. He had a problem. I thought they reset their Keenetics without letting me know. If they did, I came up with the idea that it would be great to restore from the backup that was in the RMM at the time.
-
1
-
-
7 hours ago, Julia Rybakova said:
Hej!
We developed and deployed 5 new events for Notification month ago.
We going to add about 5-6 event soon (i think, it'll be autumn).
If you have any ideas, please share with me
Yes, all my notifications are turned on.
Sometimes they come a little late.It would be nice to have the changelogs as a post as well. RMM, KeeneticOS, MobileApp etc.
-
2 hours ago, r13 said:
It looks like yes, same issue
Let`s wait for @The squirrel`s response
I noticed this situation in the previous 2-3 FW (3.9.a..)
But since I didn't know the logic completely, I didn't know if it was ok or not.
-
2 hours ago, Ричард Санчез said:
no, on Peak they are separated.
2 hours ago, vk11 said:This is Peak, not Giga/Ultra. They are two different ports.
It is not available for sale in our country. I didn't pay attention to the features. Pardon.
-
Is it correct to show only the used space in the size section in the file manager
Could it be displayed next to the total field?
-
2 hours ago, r13 said:
@eralde Good afternoon,
Continuing the topic raised here:
My explanation does not match what is presented on the web
The first route with a flag is exclusive, but there is no indication for it
The second is without an exclusive flag, but there is an indication for it
Also looks strange rci output for them:
{
"show": {
"ip": {
"route": [
{
"destination": "165.225.91.0/24",
"gateway": "192.168.1.1",
"interface": "CdcEthernet0",
"metric": 0,
"flags": "U",
"rejecting": false,
"proto": "boot",
"floating": false,
"static": true
},
{
"destination": "192.168.160.0/20",
"gateway": "0.0.0.0",
"interface": "Wireguard0",
"metric": 0,
"flags": "U",
"rejecting": false,
"proto": "boot",
"floating": false,
"static": false
}
]
}
}
}Both are static but the "static": true flag is set for only one of the routes
Is it the same situation? I could not fully understand.
-
Why is port "0" on the other side seriously? Sfp port and 0 (factory wan port) should be integrated, side by side, right?
-
Hello there,
Are news and changes planned to be shared via the Keenetic RMM bot?
I think it would be great.
Thank you -
1 hour ago, eralde said:
Thank you! Now it's clear what needs to be fixed.
I showed your request to a friend of mine yesterday, and then I said the problem was solved.
I was not wrong. You are great. Thank you. -
2 hours ago, eralde said:
Could you open "Developer tools" in your browser (F12) & show me a screenshot of the "Console" tab there when the PPPoE import modal window does not close automatically?
Of course https://prnt.sc/UUoTIhgetTRn
-
1
-
Keenetic Linear и работа аналоговой телефонии
in Обмен опытом
Posted
My hub is Ugreen 3.0 USB Gigabit Ethernet ASIX88179 (https://ugreen.com.tr/urun/ugreen-usb-3-0-gigabit-ethernet-rj45-donusturucu-usb-coklayici/)
In addition, the hub is powered by a 5v 3a adapter. There are 2.5" hdd and ssd in 2 ports. I will send the files privately when I repeat the error. thanks.